论文信息 - Impact of the fibre characteristics on four-wave mixing in the 1310-nm wavelength domain

Impact of the fibre characteristics on four-wave mixing in the 1310-nm wavelength domain

In this article we investigate impact of the four wave mixing effect on the quality of the signal in DWDM system, that uses standard G.652 fibre as an optical medium, in the 1310 nm wavelength domain. In particular influence of the fibre parameters like attenuation, chromatic dispersion slope and effective mode area were examined. Moreover, the impact of the input signal extinction ratio was investigated. Simulation were performed as a function of the input power per channel of the modulated signal and channel spacing of the DWDM network.

Konrad Markowski | Jarosław P. Turkiewicz

[1] R. M. Derosier,et al. Four-photon mixing and high-speed WDM systems , 1995 .

[2] H. de Waardt,et al. Low Complexity up to 400-Gb/s Transmission in the 1310-nm Wavelength Domain , 2012, IEEE Photonics Technology Letters.

[3] T. Simoyama,et al. 50-Gbps direct modulation using 1.3-µm AlGaInAs MQW distribute-reflector lasers , 2012, 2012 38th European Conference and Exhibition on Optical Communications.

[4] J. D. Minelly,et al. Tapered-beam expander for single-mode optical-fibre gap devices , 1986 .

[5] Jarosław P. Turkiewicz,et al. Generation and reception of the up to 28Gbit/s optical signals with the limited-bandwidth components , 2012 .

[6] Huug de Waardt,et al. Up to 112 Gbit/s single wavelength channel transmission in the 1310 nm wavelength domain , 2014 .

[7] Masato Nishihara,et al. Experimental investigation of 100-Gbps transmission over 80-km single mode fiber using discrete multi-tone modulation , 2012, Photonics West - Optoelectronic Materials and Devices.

[8] K. Inoue. Four-wave mixing in an optical fiber in the zero-dispersion wavelength region , 1992 .

[9] Paweł Mazurek,et al. Generation and reception of up to 28 Gbit / s optical signals with limited-bandwidth components , .