Reliable evaluation of dye-sensitized solar cells

Dye-sensitized solar cells (DSCs) have attracted great interest as potential candidates of “low cost solar cells” in the solution of global energy demand. To accelerate the progress of DSCs, it is important to evaluate device performance with reliable measurements that will enable more effective comparison and application of new findings in materials and technologies by different research groups. In this perspective, we review existing measurement methods and summarize the appropriate techniques for the evaluation of DSCs based mainly on our experience, which helped us to obtain reliable results close to those certified by public test centres. The key factors in the measurements that correlate to device performance are discussed, including the calibration of the solar simulator using reference cells, the measurement time of the current–voltage characteristics and the incident photon-to-current conversion efficiency, and the area for determination with a proper shading mask. We demonstrate the causes and solutions of measurement errors in the results of device performance, such as short circuit photocurrent density, open circuit voltage, fill factor, and energy conversion efficiency. Finally, a list of appropriate measurements for a more reliable evaluation of DSCs is proposed.

[1]  Lars Kloo,et al.  Ionic liquid electrolytes for dye-sensitized solar cells. , 2008, Dalton transactions.

[2]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[3]  Akio Yasuda,et al.  Electrical characterisation of dye sensitised nanocrystalline TiO2 solar cells with liquid electrolyte and solid-state organic hole conductor , 2002 .

[4]  Takayuki Kitamura,et al.  Calibration of solar simulator for evaluation of dye-sensitized solar cells , 2004 .

[5]  Martin A. Green,et al.  Solar cell efficiency tables (version 39) , 2012 .

[6]  C. Osterwald.  TRANSLATION OF DEVICE PERFORMANCE MEASUREMENTS TO REFERENCE CONDITIONS , 1986 .

[7]  Xudong Yang,et al.  Effects of 4-tert-butylpyridine on the quasi-Fermi levels of TiO2 films in the presence of different cations in dye-sensitized solar cells. , 2011, Physical chemistry chemical physics : PCCP.

[8]  P. Liska,et al.  Engineering of efficient panchromatic sensitizers for nanocrystalline TiO(2)-based solar cells. , 2001, Journal of the American Chemical Society.

[9]  Ryoichi Komiya,et al.  Dye-Sensitized Photovoltaic Module with Conversion Efficiency of 8.4% , 2009 .

[10]  Michael Grätzel,et al.  Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent Efficiency , 2011, Science.

[11]  Anders Hagfeldt,et al.  Investigation of influence of redox species on the interfacial energetics of a dye-sensitized nanoporous TiO2 solar cell , 1998 .

[12]  Takehito Mitate,et al.  Modeling of an equivalent circuit for dye-sensitized solar cells , 2004 .

[13]  Peng Wang,et al.  Dye-Sensitized Solar Cells with a High Absorptivity Ruthenium Sensitizer Featuring a 2-(Hexylthio)thiophene Conjugated Bipyridine , 2009 .

[14]  Ashraful Islam,et al.  Conversion efficiency of 10.8% by a dye-sensitized solar cell using a TiO2 electrode with high haze , 2006 .

[15]  Guido Viscardi,et al.  Combined experimental and DFT-TDDFT computational study of photoelectrochemical cell ruthenium sensitizers. , 2005, Journal of the American Chemical Society.

[16]  Michael Grätzel,et al.  Light intensity, temperature, and thickness dependence of the open-circuit voltage in solid-state dye-sensitized solar cells , 2006 .

[17]  Mohammad Khaja Nazeeruddin,et al.  Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodes , 1993 .

[18]  Juan Bisquert,et al.  Simulation of Steady-State Characteristics of Dye- Sensitized Solar Cells and the Interpretation of the Diffusion Length , 2010 .

[19]  Martin A. Green,et al.  Solar cell efficiency tables (Version 38) , 2011 .

[20]  Peng Wang,et al.  Gelation of ionic liquid-based electrolytes with silica nanoparticles for quasi-solid-state dye-sensitized solar cells. , 2003, Journal of the American Chemical Society.

[21]  Gang Li,et al.  Accurate Measurement and Characterization of Organic Solar Cells , 2006 .

[22]  Shane Ardo,et al.  Photodriven heterogeneous charge transfer with transition-metal compounds anchored to TiO2 semiconductor surfaces. , 2009, Chemical Society reviews.

[23]  Jun-Ho Yum,et al.  Sb2S3-Based Mesoscopic Solar Cell using an Organic Hole Conductor , 2010 .

[24]  Naoki Koide,et al.  Methods of Measuring Energy Conversion Efficiency in Dye-sensitized Solar Cells , 2005 .

[25]  Naoki Koide,et al.  Measuring methods of cell performance of dye-sensitized solar cells , 2004 .

[26]  Josef Salbeck,et al.  Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies , 1998, Nature.

[27]  Henry J. Snaith,et al.  How should you measure your excitonic solar cells , 2012 .

[28]  Peng Wang,et al.  A New Ionic Liquid Electrolyte Enhances the Conversion Efficiency of Dye-Sensitized Solar Cells , 2003 .

[29]  Seigo Ito,et al.  Photovoltaic characterization of dye‐sensitized solar cells: effect of device masking on conversion efficiency , 2006 .

[30]  Ashraful Islam,et al.  Integrated dye-sensitized solar cell module with conversion efficiency of 8.2% , 2009 .

[31]  Hironori Arakawa,et al.  Significant influence of TiO2 photoelectrode morphology on the energy conversion efficiency of N719 dye-sensitized solar cell , 2004 .

[32]  Ashraful Islam,et al.  Dye-Sensitized Solar Cells with Conversion Efficiency of 11.1% , 2006 .

[33]  Anders Hagfeldt,et al.  Highly Efficient Organic Sensitizers for Solid-State Dye-Sensitized Solar Cells , 2009 .

[34]  Xudong Yang,et al.  High-efficiency dye-sensitized solar cell with a novel co-adsorbent , 2012 .

[35]  U. Würfel,et al.  Direct measurement of the internal electron quasi-Fermi level in dye sensitized solar cells using a titanium secondary electrode. , 2006, The journal of physical chemistry. B.