Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening

[1]  T. Niendorf,et al.  Structural components manufactured by Selective Laser Melting and Investment Casting—Impact of the process route on the damage mechanism under cyclic loading , 2017 .

[2]  Patrice Peyre,et al.  3D Laser Shock Peening – A new method for the 3D control of residual stresses in Selective Laser Melting , 2017 .

[3]  J. Delahaye,et al.  Fusion‐Based Additive Manufacturing for Processing Aluminum Alloys: State‐of‐the‐Art and Challenges , 2017 .

[4]  Lei Liu,et al.  Dynamic response and residual stress fields of Ti6Al4V alloy under shock wave induced by laser shock peening , 2017 .

[5]  Yongfeng Lu,et al.  Influence of laser shock peening on irradiation defects in austenitic stainless steels , 2017 .

[6]  N. Huber,et al.  Effects of laser shock peening on the microstructure and fatigue crack propagation behaviour of thin AA2024 specimens , 2017 .

[7]  K. Luo,et al.  Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts , 2017 .

[8]  K. Luo,et al.  Tensile properties and surface nanocrystallization analyses of H62 brass subjected to room-temperature and warm laser shock peening , 2017 .

[9]  K. Luo,et al.  Surface EBSD analysis and strengthening mechanism of AISI304 stainless steel subjected to massive LSP treatment with different pulse energies , 2017 .

[10]  Ma Hongwen,et al.  Effect of CaF2 addition on macro/microstructures and mechanical properties of wire and arc additive manufactured Ti-6Al-4V components , 2017 .

[11]  D. Karthik,et al.  Laser shock peening enhanced corrosion properties in a nickel based Inconel 600 superalloy , 2017 .

[12]  S. Narayanswamy,et al.  Effect of high repetition laser shock peening on biocompatibility and corrosion resistance of magnesium , 2017 .

[13]  D. Rugg,et al.  Microstructural characterisation of metallic shot peened and laser shock peened Ti–6Al–4V , 2017 .

[14]  A. Beese,et al.  Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions , 2017 .

[15]  Jenn‐Ming Yang,et al.  Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing , 2016 .

[16]  J. M. Alegre,et al.  State of the art of Deep Rolling , 2016 .

[17]  Zengxi Pan,et al.  Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing , 2016, Materials.

[18]  K. Luo,et al.  Tensile properties, residual stress distribution and grain arrangement as a function of sheet thickness of Mg–Al–Mn alloy subjected to two-sided and simultaneous LSP impacts , 2016 .

[19]  Jay Patel,et al.  Additive manufacturing , 2016, XRDS.

[20]  Matthew Roy,et al.  Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components , 2016 .

[21]  A. Addison,et al.  Wire + Arc Additive Manufacturing , 2016 .

[22]  M. Wang,et al.  Laser additive manufacture of titanium alloys , 2016 .

[23]  Sanjooram Paddea,et al.  Fatigue crack propagation behaviour in wire+arc additive manufactured Ti‐6Al‐4V: Effects of microstructure and residual stress , 2016 .

[24]  K. Luo,et al.  Investigation and microstructural analyses of massive LSP impacts with coverage area on crack initiation location and tensile properties of AM50 magnesium alloy , 2016 .

[25]  Thilo Pirling,et al.  A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components , 2016 .

[26]  Edward D. Herderick,et al.  Progress in Additive Manufacturing , 2015 .

[27]  Yusheng Shi,et al.  Effects of scan line spacing on pore characteristics and mechanical properties of porous Ti6Al4V implants fabricated by selective laser melting , 2014 .

[28]  Brent Stucker,et al.  Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes , 2014 .

[29]  K. Luo,et al.  Effects of laser shock peening and groove spacing on the wear behavior of non-smooth surface fabricated by laser surface texturing , 2014 .

[30]  Gary J. Cheng,et al.  Ultrahigh dense and gradient nano-precipitates generated by warm laser shock peening for combination of high strength and ductility , 2014 .

[31]  Philip B. Prangnell,et al.  Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting , 2013 .

[32]  Paul A. Colegrove,et al.  Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling , 2013 .

[33]  Joaquim Ciurana,et al.  Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process , 2013 .

[34]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[35]  Paul A. Colegrove,et al.  Experimental measurement of biaxial thermal stress fields caused by arc welding , 2012 .

[36]  S. Sathyajith,et al.  Effect of laser shot peening on precipitation hardened aluminum alloy 6061-T6 using low energy laser , 2012 .

[37]  Bong-Joong Kim,et al.  Dislocation Pinning Effects Induced by Nano-precipitates During Warm Laser Shock Peening: Dislocation Dynamic Simulation and Experiments , 2011 .

[38]  M. Preuss,et al.  Residual stresses in laser direct metal deposited Waspaloy , 2011 .

[39]  Bong-Joong Kim,et al.  Fatigue Performance Improvement in AISI 4140 Steel by Dynamic Strain Aging and Dynamic Precipitation During Warm Laser Shock Peening , 2011 .

[40]  Fu-Zhen Xuan,et al.  Improvement of fatigue life of Ti–6Al–4V alloy by laser shock peening , 2010 .

[41]  K. Luo,et al.  Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts , 2010 .

[42]  J. Kruth,et al.  Selective laser melting of biocompatible metals for rapid manufacturing of medical parts , 2006 .

[43]  Frédéric Barlat,et al.  Strain rate sensitivity of the commercial aluminum alloy AA5182-O , 2005 .

[44]  Y. Mai,et al.  Laser shock processing and its effects on microstructure and properties of metal alloys: a review , 2002 .

[45]  W. S. Miller,et al.  Recent development in aluminium alloys for aerospace applications , 2000 .

[46]  J. Chu,et al.  Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel , 1999 .

[47]  Q. Liu,et al.  SCALING OF MISORIENTATION ANGLE DISTRIBUTIONS , 1998 .

[48]  Laurent Berthe,et al.  Physics and applications of laser-shock processing , 1998 .

[49]  R. Fabbro,et al.  Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour , 1996 .

[50]  R. Fabbro,et al.  Laser shock processing: a review of the physics and applications , 1995, Optical and Quantum Electronics.

[51]  P. Ballard,et al.  Plastic strain and residual stress fields induced by a homogeneous impact over the boundary of an elastic-plastic half-space , 1995 .

[52]  J. N. Johnson,et al.  Dynamic Deformation Twinning in Shock‐Loaded Iron , 1971 .