Ultrahigh temperature ceramic HfB2-SiC coating by liquid phase sintering method to protect carbon materials from oxidation

[1]  M. Salavati‐Niasari,et al.  Plasmonic enhancement of dye-sensitized solar cells by using Au-decorated Ag dendrites as a morphology-engineered , 2018, Renewable Energy.

[2]  Ping Zhang,et al.  Preparation of TaB 2 -SiC oxidation protective coating for carbon materials by liquid phase sintering , 2018, Ceramics International.

[3]  Hejun Li,et al.  The oxidation resistance of two-temperature synthetic HfB2-SiC coating for the SiC coated C/C composites , 2018 .

[4]  M. Salavati‐Niasari,et al.  Self-assembly of hydrogen storage materials based multi-walled carbon nanotubes (MWCNTs) and Dy3Fe5O12 (DFO) nanoparticles , 2018 .

[5]  Jianfeng Huang,et al.  A novel design of oxidation protective β-Y2Si2O7 nanowire toughened Y2SiO5/Y2O3-Al2O3-SiO2 glass ceramic coating for SiC coated carbon/carbon composites , 2018 .

[6]  M. Salavati‐Niasari,et al.  Grafting of CuFe12O19 nanoparticles on CNT and graphene: Eco-friendly synthesis, characterization and photocatalytic activity , 2018 .

[7]  Q. Fu,et al.  Improving oxidation resistance of MoSi2 coating by reinforced with Al2O3 whiskers , 2018 .

[8]  Xinghong Zhang,et al.  Thermal shock behavior of ZrB2-based sharp leading edges evaluated by a novel water spraying method , 2018 .

[9]  M. Salavati‐Niasari,et al.  Novel nanostructured electron transport compact layer for efficient and large-area perovskite solar cells using acidic treatment of titanium layer , 2018, Nanotechnology.

[10]  Hejun Li,et al.  HfB2-SiC-MoSi2 oxidation resistance coating fabricated through in-situ synthesis for SiC coated C/C composites , 2017 .

[11]  M. Salavati‐Niasari,et al.  Design and fabrication of a high performance inorganic tandem solar cell with 11.5% conversion efficiency , 2017 .

[12]  Q. Fu,et al.  Preparation, ablation behavior and thermal retardant ability of C/C-HfB2-SiC composites , 2017 .

[13]  Hejun Li,et al.  Ablation resistance of HfB2-SiC coating prepared by in-situ reaction method for SiC coated C/C composites , 2017 .

[14]  M. Salavati‐Niasari,et al.  Physicochemical Interface Engineering of CuI/Cu as Advanced Potential Hole-Transporting Materials/Metal Contact Couples in Hysteresis-Free Ultralow-Cost and Large-Area Perovskite Solar Cells , 2017 .

[15]  Q. Fu,et al.  The oxidation behavior of MoSi2-CrSi2-Si/SiC coating for C/C composites in H2O-O2-Ar atmosphere: Experiment and first-principle investigation , 2017 .

[16]  Yulei Zhang,et al.  Ablation resistance of HfC coating reinforced by HfC nanowires in cyclic ablation environment , 2017 .

[17]  R. S. Joseyphus,et al.  Synthesis of ZrB2-SiC ceramic composites from a single-source precursor , 2017 .

[18]  A. Cecere,et al.  Thermo-chemical surface instabilities of SiC-ZrB2 ceramics in high enthalpy dissociated supersonic airflows , 2017 .

[19]  H. Kleebe,et al.  Critical oxidation behavior of Ta-containing ZrB2 composites in the 1500–1650 °C temperature range , 2017 .

[20]  H. Kleebe,et al.  Microstructure evolution of a W‐doped ZrB2 ceramic upon high‐temperature oxidation , 2017 .

[21]  Y. Xiang,et al.  Microstructure and oxidation protection of a MoSi2/SiO2-B2O3-Al2O3 coating for SiC-coated carbon/carbon composites , 2017 .

[22]  Jianfeng Huang,et al.  A mullite oxidation protective coating on SiC coated carbon/carbon composites by hot dipping , 2016 .

[23]  M. Salavati‐Niasari,et al.  Influence of ZrB2 Nanoparticles on the Mechanical and Thermal Behaviors of Carbon Nanotube Reinforced Resol Composite , 2016 .

[24]  Hejun Li,et al.  Comparison of the oxidation behaviors of SiC coatings on C/C composites prepared by pack cementation and chemical vapor deposition , 2016 .

[25]  Q. Fu,et al.  Ablation behavior of TaB2SiC coating for carbon/carbon composites under oxyacetylene torch , 2016 .

[26]  Xiaohong Shi,et al.  Oxidation resistance of a La–Mo–Si–O–C coating prepared by Supersonic Atmosphere Plasma Spraying on the surface of SiC-coated C/C composites , 2016 .

[27]  Hejun Li,et al.  SiC/ZrB2–SiC–ZrC multilayer coating for carbon/carbon composites against ablation , 2016 .

[28]  M. Salavati‐Niasari,et al.  Synthesis, characterization and chemical binding of a Ni(II) Schiff base complex on functionalized MWNTs; Catalytic oxidation of cyclohexene with molecular oxygen , 2016 .

[29]  Hejun Li,et al.  A SiC-ZrB2-ZrC coating toughened by electrophoretically-deposited SiC nanowires to protect C/C composites against thermal shock and oxidation , 2015 .

[30]  Y. Sakka,et al.  Densification, microstructure evolution and mechanical properties of WC doped HfB2-SiC ceramics , 2015 .

[31]  M. Salavati‐Niasari,et al.  Enhanced thermal resistance of GO/C/phenolic nanocomposite by introducing ZrB2 nanoparticles , 2015 .

[32]  Hejun Li,et al.  Ultra‐High‐Temperature Ceramic HfB2‐SiC Coating for Oxidation Protection of SiC‐Coated Carbon/Carbon Composites , 2014 .

[33]  Hejun Li,et al.  Preparation of oxidation protective ZrB2-SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites , 2014 .

[34]  Erica L. Corral,et al.  Structural Influence on the Thermal Conversion of Self‐Catalyzed HfB2/ZrB2 Sol–Gel Precursors by Rapid Ultrasonication of Oxychloride Hydrates , 2014 .

[35]  Li Wei,et al.  ZrB2/SiC as a protective coating for C/SiC composites: Effect of high temperature oxidation on mechanical properties and anti-ablation property , 2013 .

[36]  D. Sciti,et al.  Effect of different sintering aids on thermo–mechanical properties and oxidation of SiC fibers – Reinforced ZrB2 composites , 2013 .

[37]  H. Sano,et al.  A carbon nanotube–enhanced SiC coating for the oxidation protection of C/C composite materials , 2011 .

[38]  M. Salavati‐Niasari,et al.  Oxovanadium(IV) salophen complex covalently anchored to multi-wall carbon nanotubes (MWNTs) as heterogeneous catalyst for oxidation of cyclooctene , 2011 .

[39]  D. Sciti,et al.  Densification of ZrB2–TaSi2 and HfB2–TaSi2 Ultra‐High‐Temperature Ceramic Composites , 2011 .

[40]  Erica L. Corral,et al.  Improved ablation resistance of C–C composites using zirconium diboride and boron carbide , 2010 .

[41]  R. Orrú,et al.  Synthesis, densification and characterization of TaB2–SiC composites , 2010 .

[42]  X. Xiong,et al.  The effect of carbon nanotube growing on carbon fibers on the microstructure of the pyrolytic carbon and the thermal conductivity of carbon/carbon composites , 2009 .

[43]  Zeng Xie-rong,et al.  Preparation of enhanced HA coating on H2O2-treated carbon/carbon composite by induction heating and hydrothermal treatment methods , 2009 .

[44]  M. Salavati‐Niasari,et al.  Covalent functionalization of multi-wall carbon nanotubes (MWNTs) by nickel(II) Schiff-base complex: Synthesis, characterization and liquid phase oxidation of phenol with hydrogen peroxide , 2008 .

[45]  G. Hilmas,et al.  Synthesis, densification, and mechanical properties of TaB2 , 2008 .

[46]  J. Zaykoski,et al.  High‐Temperature Chemistry and Oxidation of ZrB2 Ceramics Containing SiC, Si3N4, Ta5Si3, and TaSi2 , 2008 .

[47]  M. Pavese,et al.  HfB2/SiC as a protective coating for 2D Cf/SiC composites: Effect of high temperature oxidation on mechanical properties , 2008 .

[48]  H. Li,et al.  Influence of NaF concentration on fluorine-containing hydroxyapatite coating on carbon/carbon composites , 2007 .

[49]  N. Richet,et al.  Oxidation Resistance of HfB2-SiC Coatings for Protection of Carbon Fiber Based Composites , 2004 .

[50]  D. Fang,et al.  Mechanical and electrical properties of MoSi2-based ceramics with various ZrB2-20 vol% SiC as additives for ultra high temperature heating element , 2018 .

[51]  M. Nygren,et al.  Spark plasma sintering of Zr-and Hf-borides with decreasing amounts of MoSi2 as sintering aid , 2008 .