Low Temperature Mechanical Properties Of Copper and Selected Copper Alloys: A Compilation From the Literature

From Abstract: "In the past 60 years considerable data have been accumulated concerning the mechanical properties of copper and its alloys.It was felt that there was great need to adequately document these results in one publication. Therefore a unique type of compilation is presented. The compilation is divided into four parts. The first section is intended for quick reference use for those who are interested in average values. The second section includes data from most of the investigators who have published results on the mechanical properties of copper and its alloys. The third section is composed of tables classifying the investigations which were not in section two. The fourth section section lists, in alphabetical order, all references used."

[1]  D. Waldorf.  Temperature and composition dependence of the elastic constants of dilute alloys of manganese in copper , 1960 .

[2]  J. A. Roberson,et al.  Fatigue of copper-zinc alloys at 100°K , 1963 .

[3]  M. S. Paterson,et al.  The influence of strain amplitude on the work hardening of copper crystals in alternating tension and compression , 1960 .

[4]  H. C. H. C..  The Properties of Copper , 1918, Nature.

[5]  T. J. Koppenaal.  Neutron irradiation strengthening in copper single crystals , 1965 .

[6]  N. Wadsworth.  Work hardening of copper crystals under cyclic straining , 1963 .

[7]  R. Reed,et al.  The Impact Testing of Various Alloys at Low Temperatures , 1960 .

[8]  Das Problem der Festigkeit fester Körper , 1960 .

[9]  H. F. Moore,et al.  A study of slip lines, strain lines, and cracks in metals under repeated stress , 1930 .

[10]  H. Nine,et al.  Fatigue Failure in Copper Single Crystals at Low and High Amplitudes of Torsion , 1962, Nature.

[11]  W. Witzig.  Creep of Copper under Deuteron Bombardment , 1952 .

[12]  M. R. Gross.  LOW-CYCLE FATIGUE OF MATERIALS FOR SUBMARINE CONSTRUCTION , 1963 .

[13]  M. Alexandre Krupkowski.  Propriétés mécaniques du cuivre , 1931 .

[14]  Charles S. Smith,et al.  Elastic constants of copper-nickel alloys , 1960 .

[15]  W. R. Hibbard,et al.  Tensile deformation of high-purity copper as a function of temperature, strain rate, and grain size , 1953 .

[16]  M. Marin.  Unloading effects in the plastic properties of copper single crystals , 1958 .

[17]  G. V. Uzhik.  Strength and plasticity of metals at low temperatures , 1961 .

[18]  J. F. W. Young.  On the Yield Stress of Copper Crystals , 1962 .

[19]  T. Mitchell,et al.  The work-hardening characteristics of Cu and α-brass single crystals between 4•2 and 500°K , 1963 .

[20]  C. R. Barrett,et al.  INFLUENCE OF STACKING FAULT ENERGY ON HIGH TEMPERATURE CREEP OF PURE METALS. , 1965 .

[21]  L. F. Coffin.  Discussion: “Low Cycle Fatigue Damage in Pressure-Vessel Materials” (Sessler, J. G., and Weiss, Volker, 1963, ASME J. Basic Eng., 85, pp. 539–545) , 1963 .

[22]  M. Druyvesteyn.  Influence of cold work on the rigidity of copper , 1959 .

[23]  C. J. Smithells,et al.  Metals reference book , 1949 .

[24]  B. Chalmers,et al.  A study of the plastic deformation of copper single crystals , 1954 .

[25]  G. J. Davies,et al.  Yield phenomena in polycrystalline copper , 1965 .

[26]  W. Lems.  The change of Young's modulus of copper and silver after deformation at low temperature and its recovery , 1962 .

[27]  M. Makin,et al.  The hardening of copper single crystals by electron irradiation , 1962 .

[28]  J. Christian,et al.  Fatigue in Metals , 1955, Nature.

[29]  W. G. Brombacher.  Temperature Coefficient of the Elastic Moduli of Spring Materials Used in Instrument Design , 1933 .

[30]  A. Thiruvengadam,et al.  High-Frequency Fatigue of Metals and Their Cavitation-Damage Resistance , 1966 .

[31]  P. Feltham,et al.  Yielding and work-hardening in alpha-brasses , 1960 .

[32]  S. P. Keeler.  Plastic instability and fracture in sheets stretched over rigid punches , 1961 .

[33]  Charles S. Smith,et al.  The elastic constants of copper alloys , 1954 .

[34]  A. Mcevily,et al.  On fatigue crack propagation in F.C.C. metals , 1963 .

[35]  T. J. Koppenaal.  The effect of neutron irradiation on the strength of αCu-Al single crystals , 1964 .

[36]  M. Makin,et al.  Hardening of copper irradiated at −195°C , 1961 .

[37]  F. Bullen,et al.  The temperature-dependence of strain-hardening in polycrystalline copper , 1963 .

[38]  H. Rosenberg.  Properties of metals at low temperatures , 1954, Polar Record.

[39]  W. Druyvesteyn,et al.  Change in the modulus of elasticity of copper after deformation in the temperature range from 4.2–78°K , 1962 .

[40]  M. Adams,et al.  The hardening of copper by neutron irradiation , 1959 .

[41]  R. Michael McClintock,et al.  Mechanical Properties of Structural Materials at Low Temperatures: A Compilation From the Literature , 1960 .

[42]  G. Schwab.  Some new aspects of the strength of alloys , 1949 .

[43]  F. C. Lea.  The Effect of Temperature on Some of the Properties of Metals , 1922 .

[44]  P. L. Teed.  Aircraft Metallic Materials Under Low Temperature Conditions , 1951 .

[45]  A. Sosin,et al.  Effect of Electron Irradiation and Subsequent Thermal Treatment on Young's Modulus of Copper , 1960 .

[46]  Clair Upthegrove,et al.  Elevated-temperature properties of coppers and copper-base alloys : data compiled by and issued under the auspices of The Data and Publications Panel of the ASTM-ASME Joint Committee on Effect of Temperature on the Properties of Metals , 1956 .

[47]  L. Bruner,et al.  Modulus and Damping of Copper after Plastic Deformation at 4.2°K , 1963 .

[48]  P. Feltham.  Creep and stress relaxation in alpha-brass at low temperatures , 1961 .

[49]  J. D. Meakin,et al.  Creep in face-centred cubic metals with special reference to copper , 1959 .

[50]  P. Hirsch,et al.  The flow stress of aluminium and copper at high temperatures , 1961 .

[51]  D. Horn,et al.  PROPERTY INVESTIGATION OF COPPER BASE ALLOYS AT AMBIENT AND ELEVATED TEMPERATURES , 1965 .

[52]  N. Frost.  Effect of Mean Stress on the Rate of Growth of Fatigue Cracks in Sheet Materials , 1962 .

[53]  D. Kuhlmann-wilsdorf,et al.  THE EFFECT OF PRESTRESSING ON THE STRENGTH OF NEUTRON‐IRRADIATED COPPER SINGLE CRYSTALS , 1964 .

[54]  Herbert Fisher Moore,et al.  An investigation of the fatigue of metals, series of 1925 : a report of the investigation conducted by the Engineering Experiment Station, University of Illinois in cooperation with the National Research Council , 1924 .

[55]  W. C. Ellis,et al.  Effect of Prior Strain at Low Temperatures on the Properties of Some Close-Packed Metals at Room Temperature , 1952 .

[56]  J. Kuroyanagi.  Change in Modulus of Rigidity of Brass Wires by Cold-Working and Subsequent Annealing , 1960 .

[57]  G. Copley,et al.  Creep in face-centred metals and solid solutions with special reference to α-brasses , 1960 .

[58]  W. C. Overton,et al.  Temperature Variation of the Elastic Constants of Cubic Elements. I. Copper , 1955 .