Metaheuristic Approach of Multi-Objective Optimization during EDM Process

In modern-day manufacturing Electric Discharge Machining (EDM) process has successfully placed itself in the domain of precision machining and generating complex geometries where secondary machining processes are eliminated. In this research paper, a die sinking EDM is applied to machine mild steel in order to measure the different multi-objective results like Material Removal Rate (MRR) and Over Cut (OC). This contradictory objective is accomplished by using the control parameters like a pulse on time, duty factor, gap current and spark gap employing copper tool with lateral flushing. Here the individual objective function of the responses is created through regression analysis. Primarily the contradictory objectives are optimized by employing Taguchi Methodology, then Regression analysis is done on the test results. Additionally, the experimental results are optimized using Response Surface Methodology (RSM). It is followed by a multi-objective optimization through Overlaid contour plots and Desirability functions to ascertain the best parametric combination amongst the set of feasible alternatives.

[1]  Klaus Hinkelmann,et al.  Design and Analysis of Experiment , 1975 .

[2]  J. V. Grice,et al.  Design and Analysis of Experiment , 2000, Technometrics.

[3]  Sung H. Park,et al.  Optimization in Multiple Response Model with Modified Desirability Function , 2006 .

[4]  Nagahanumaiah,et al.  Optimization of EDM machining parameters using DMLS electrode , 2006 .

[5]  M. Kiyak,et al.  Examination of machining parameters on surface roughness in EDM of tool steel , 2007 .

[6]  In-Jun Jeong,et al.  An interactive desirability function method to multiresponse optimization , 2009, Eur. J. Oper. Res..

[7]  Vishal Parashar,et al.  Regression Analysis and Optimization of Material Removal Rate on Electric Discharge Machine for EN- 19 alloy steel , 2012 .

[8]  Hamid Baseri,et al.  Optimization of machining parameters in rotary EDM process by using the Taguchi method , 2012, The International Journal of Advanced Manufacturing Technology.

[9]  C. C. Tsao,et al.  Evaluation of the characteristics of the microelectrical discharge machining process using response surface methodology based on the central composite design , 2012 .

[10]  R. K. Garg,et al.  An investigation into the effect of nickel micro powder suspended dielectric and varying triangular shape electrodes on EDM performance measures of EN-19 steel , 2012 .

[11]  Mojtaba Salehi,et al.  A robust interactive approach to optimize correlated multiple responses , 2013 .

[12]  Dhananjay R. Mishra,et al.  Electrical Discharge Machining of AISI 329 Stainless Steel Using Copper and Brass Rotary Tubular Electrode , 2014 .

[13]  M. Pradeepkumar,et al.  Optimization of cryogenic cooled EDM process parameters using grey relational analysis , 2014 .

[14]  A. Dubey,et al.  Optimization of the Process Parameters in Micro-Electric Discharge Machining Using Response Surface Methodology and Genetic Algorithm , 2014 .

[15]  Optimization of cryogenic cooled EDM process parameters using grey relational analysis , 2014 .

[16]  Vishal J Nadpara,et al.  Optimization of EDM Process Parameters Using Taguchi Method with Graphite Electrode , 2014 .