Reset Current Scaling in Phase-Change Memory Cells: Modeling and Experiments

The operation of a phase-change memory cell is studied, with special regard to programming performance, by means of analytical and TCAD numerical modeling and experimental characterization. Dependence of the reset current on geometrical properties of the heater element is analyzed through the study of heat flux from the heater element to the phase-change material. A simple electrothermal analytical model is implemented, which allows the prediction of the cell reset current value as a function of heater geometrical parameters. Analytical predictions are compared with good agreement to extensive experimental measurements. The effects of power dissipation are studied, showing that cell power efficiency strongly depends on its geometrical properties.

[1]  S. Ovshinsky.  Reversible Electrical Switching Phenomena in Disordered Structures , 1968 .

[2]  Kevin Barraclough,et al.  I and i , 2001, BMJ : British Medical Journal.

[3]  U-In Chung,et al.  An edge contact type cell for Phase Change RAM featuring very low power consumption , 2003, 2003 Symposium on VLSI Technology. Digest of Technical Papers (IEEE Cat. No.03CH37407).

[4]  S. Lai,et al.  Current status of the phase change memory and its future , 2003, IEEE International Electron Devices Meeting 2003.

[5]  S.Y. Lee,et al.  Writing current reduction for high-density phase-change RAM , 2003, IEEE International Electron Devices Meeting 2003.

[6]  R. Bez,et al.  Phase-change memory technology for embedded applications , 2004, Proceedings of the 30th European Solid-State Circuits Conference (IEEE Cat. No.04EX850).

[7]  A. Pirovano,et al.  Analysis of phase distribution in phase-change nonvolatile memories , 2004, IEEE Electron Device Letters.

[8]  F. Pellizzer,et al.  Novel /spl mu/trench phase-change memory cell for embedded and stand-alone non-volatile memory applications , 2004, Digest of Technical Papers. 2004 Symposium on VLSI Technology, 2004..

[9]  A.L. Lacaita.  Physics and Performance of Phase Change Memories , 2005, 2005 International Conference On Simulation of Semiconductor Processes and Devices.

[10]  A. Pirovano,et al.  Comprehensive numerical model for Phase-Change Memory simulations , 2005, 2005 International Conference On Simulation of Semiconductor Processes and Devices.

[11]  S.Y. Lee,et al.  Process technologies for the integration of high density phase change RAM , 2005, 2005 International Conference on Integrated Circuit Design and Technology, 2005. ICICDT 2005..

[12]  M. Lankhorst,et al.  Low-cost and nanoscale non-volatile memory concept for future silicon chips , 2005, Nature materials.

[13]  Kinam Kim,et al.  Highly reliable 50nm contact cell technology for 256Mb PRAM , 2005, Digest of Technical Papers. 2005 Symposium on VLSI Technology, 2005..

[14]  S.O. Park,et al.  Highly scalable on-axis confined cell structure for high density PRAM beyond 256Mb , 2005, Digest of Technical Papers. 2005 Symposium on VLSI Technology, 2005..

[15]  S. Kostylev,et al.  SET to RESET Programming in Phase Change Memories , 2006, IEEE Electron Device Letters.

[16]  M. Breitwisch,et al.  Novel One-Mask Self-Heating Pillar Phase Change Memory , 2006, 2006 Symposium on VLSI Technology, 2006. Digest of Technical Papers..

[17]  E. Pop,et al.  Multiphysics Modeling and Impact of Thermal Boundary Resistance in Phase Change Memory Devices , 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..

[18]  M. Breitwisch,et al.  Ultra-Thin Phase-Change Bridge Memory Device Using GeSb , 2006, 2006 International Electron Devices Meeting.

[19]  G. Spadini,et al.  The Role of Interfaces in Damascene Phase-Change Memory , 2007, 2007 IEEE International Electron Devices Meeting.

[20]  K. Sonoda,et al.  A Compact Model of Phase-Change Memory Based on Rate Equations of Crystallization and Amorphization , 2008, IEEE Transactions on Electron Devices.

[21]  E. Lyumkis,et al.  Phase-change memory simulations using an analytical phase space model , 2008, 2008 International Conference on Simulation of Semiconductor Processes and Devices.

[22]  A. Pirovano,et al.  Chemical vapor deposition of chalcogenide materials for phase-change memories , 2008 .

[23]  D. Ielmini,et al.  Modeling of Programming and Read Performance in Phase-Change Memories—Part I: Cell Optimization and Scaling , 2008, IEEE Transactions on Electron Devices.

[24]  K. Goodson,et al.  The Impact of Thermal Boundary Resistance in Phase-Change Memory Devices , 2008, IEEE Electron Device Letters.

[25]  Song Zhitang,et al.  Simulation of Voltage SET Operation in Phase-Change Random Access Memories with Heater Addition and Ring-Type Contactor for Low-Power Consumption by Finite Element Modeling , 2009 .

[26]  宋志棠,et al.  Simulation of SET Operation in Phase-Change Random Access Memories with Heater Addition and Ring-Type Contactor for Low-Power Consumption by Finite Element Modeling , 2009 .

[27]  G. Servalli,et al.  A 45nm generation Phase Change Memory technology , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[28]  Reactively sputtered Ti-Si-N films for application as heating layers for low-current phase-change memory , 2009 .

[29]  Songlin Feng,et al.  CROSS-DISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY: Simulation of SET Operation in Phase-Change Random Access Memories with Heater Addition and Ring-Type Contactor for Low-Power Consumption by Finite Element Modeling , 2009 .

[30]  A. Pirovano,et al.  Impact of the current density increase on reliability in scaled BJT-selected PCM for high-density applications , 2010, 2010 IEEE International Reliability Physics Symposium.

[31]  A. Pirovano,et al.  Multiphysics modeling of PCM devices for scaling investigation , 2010, 2010 International Conference on Simulation of Semiconductor Processes and Devices.

[32]  K. Goodson,et al.  Temperature-Dependent Thermal Properties of Phase-Change Memory Electrode Materials , 2011, IEEE Electron Device Letters.

[33]  W. Marsden.  I and J , 2012 .

[34]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.