H-mode pedestal, ELM and power threshold studies in NSTX

H-mode operation plays a crucial role in National Spherical Torus Experiment (NSTX) research, allowing higher beta limits due to reduced plasma pressure peaking, and long pulse operation due to high bootstrap current fraction. Here, new results are presented in the areas of edge localized modes (ELMs), H-mode pedestal physics and power threshold studies. ELMs of several types as reported by higher aspect ratio tokamaks have been observed: (1) large, Type I ELMs, (2) intermediate-sized Type III ELMs and (3) tiny ELMs. Many high performance discharges in NSTX have the tiny ELMs (recently termed Type V), which have some differences as compared with small-magnitude ELM types in the published literature. A divertor multifaceted axisymmetric radiation from the edge (MARFE) on the inboard leg provides an effective light source to examine the effect of the ELMs on the divertor plasma; it is clear that only the large ELMs burn through the MARFE. The time difference between observation of the ELM flux at the outer and inner targets is substantially longer for the smallest ELMs as compared with the large ELMs. In addition, the visible light patterns show ‘finger-like’ striations during the tiny ELMs. H-mode pedestal studies have commenced, with the observation that the pedestal contains between 25% and 33% of the total stored energy, and the NSTX pedestal energy agrees reasonably well with a recent international multi-machine scaling. A power threshold identity experiment between NSTX and the Mega-Amp Spherical Tokamak shows comparable loss power at the L–H transition in balanced double-null discharges. Both machines require more power for the L–H transition as the balance is shifted toward lower-single null. High-field side gas fuelling enables more reliable H-mode access in NSTX, but does not always lead to a lower power threshold, e.g. with a reduction of the duration of early heating.