Production of Open Cell Aluminum Foams by Using the Dissolution and Sintering Process (DSP)

The manufacture of open cell metal foams by dissolution and sintering process (DSP) is the matter of the present work. Aluminum foams were produced by mixing together carbamide particles with different mesh sizes (i.e., space-holder) and very fine aluminum powders. Attention was first paid at understanding the leading phenomena of the different stages the manufacturing process gets through: Compaction of the main constituents, space-holder dissolution, and aluminum powders sintering. Then, experimental tests were performed to analyze the influence of several process parameters, namely, carbamide grain size, carbamide wt %, compaction pressure, and compaction speed on the overall mechanical performance of the aluminum foams. Meaningfulness of each operational parameter was assessed by analysis of variance. Metal foams were found to be particularly sensitive to changes in compaction pressure, exhibiting their best performances for values not higher than 400 MPa. Neural network solutions were used to model the DSP. Radial basis function (RBF) neural network trained with back propagation algorithm was found to be the fittest model. Genetic algorithm (GA) was developed to improve the capability of the RBF network in modeling the available experimental data, leading to very low overall errors. Accordingly, RBF network with GA forms the basis for the development of an accurate and versatile prediction model of the DSP, hence becoming a useful support tool for the purposes of process automation and control.

[1]  T. Lu,et al.  Thermal radiation in ultralight metal foams with open cells , 2004 .

[2]  P. V. Rao,et al.  Selection of optimum conditions for maximum material removal rate with surface finish and damage as constraints in SiC grinding , 2003 .

[3]  J. Banhart.  Manufacture, characterisation and application of cellular metals and metal foams , 2001 .

[4]  Jose C. Principe,et al.  Neural and adaptive systems : fundamentals through simulations , 2000 .

[5]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[6]  Bin Jiang,et al.  A novel method for making open cell aluminum foams by powder sintering process , 2005 .

[7]  Y. Thomas,et al.  Production of Metallic Foams Having Open Porosity Using a Powder Metallurgy Approach , 2004 .

[8]  Reinhard Pippan,et al.  DEFORMATION BEHAVIOUR OF CLOSED-CELL ALUMINIUM FOAMS IN TENSION , 2001 .

[9]  John Banhart,et al.  A study of aluminium foam formation—kinetics and microstructure , 2000 .

[10]  Byung-Min Kim,et al.  Application of artificial neural network and Taguchi method to preform design in metal forming considering workability , 1999 .

[11]  Massimiliano Barletta,et al.  Metal foams for structural applications: design and manufacturing , 2007, Int. J. Comput. Integr. Manuf..

[12]  Rajendra K. Jain,et al.  Optimum selection of machining conditions in abrasive flow machining using neural network , 2000 .

[13]  B. Samanta,et al.  Artificial neural networks and genetic algorithms for gear fault detection , 2004 .

[14]  Bin Jiang,et al.  Processing of open cell aluminum foams with tailored porous morphology , 2005 .

[15]  Luc Salvo,et al.  Spherical pore replicated microcellular aluminium: Processing and influence on properties , 2007 .

[16]  Shih-Chieh Lin,et al.  Using neural networks to predict bending angle of sheet metal formed by laser , 2000 .

[17]  Sedat Kolukisa,et al.  Application of ANN in the prediction of the pore concentration of aluminum metal foams manufactured by powder metallurgy methods , 2008 .

[18]  C. C. Yang,et al.  Foaming characteristics control during production of aluminum alloy foam , 2000 .

[19]  Massimiliano Barletta,et al.  Surface preparation and coating of metal coils by using a fully integrated manufacturing system , 2007, Int. J. Comput. Integr. Manuf..

[20]  J.-Y. Jeng,et al.  Prediction of laser butt joint welding parameters using back propagation and learning vector quantization networks , 2000 .

[21]  Dimos Poulikakos,et al.  Metal foams as compact high performance heat exchangers , 2003 .

[22]  D. E. Goldberg,et al.  Genetic Algorithm in Search , 1989 .

[23]  M. A. Elbestawi,et al.  On the FE Modeling of Closed-cell Aluminum Foam , 2005 .

[24]  Lorna J. Gibson,et al.  Aluminum foams produced by liquid-state processes , 1998 .

[25]  D. A. Caulk,et al.  A foam ablation model for lost foam casting of aluminum , 2005 .

[26]  Hongwei Song,et al.  Partition Energy Absorption of Axially Crushed Aluminum Foam-Filled Hat Sections , 2005 .