A Comparative Study of Turbulence Models Performance for Turbulent Flow in a Planar Asymmetric Diffuser

This paper presents a computational study of the separated flow in a planer asymmetric diffuser. The steady RANS equations for turbulent incompressible fluid flow and six turbulence closures are used in the present study. The commercial software code, FLUENT 6.3.26, was used for solving the set of governing equations using various turbulence models. Five of the used turbulence models are available directly in the code while the v2-f turbulence model was implemented via User Defined Scalars (UDS) and User Defined Functions (UDF). A series of computational analysis is performed to assess the performance of turbulence models at different grid density. The results show that the standard k-ω, SST k-ω and v2-f models clearly performed better than other models when an adverse pressure gradient was present. The RSM model shows an acceptable agreement with the velocity and turbulent kinetic energy profiles but it failed to predict the location of separation and attachment points. The standard k-e and the low-Re ke delivered very poor results. Keywords—Turbulence models, turbulent flow, wall functions, separation, reattachment, diffuser.

[1]  V. C. Patel,et al.  Turbulence models for near-wall and low Reynolds number flows - A review , 1985 .

[2]  O. Törnblom.  Experimental and computational studies of turbulent separating internal flows , 2006 .

[3]  D. Wilcox.  Turbulence modeling for CFD , 1993 .

[4]  Leslie M. Smith,et al.  The renormalization group, the ɛ-expansion and derivation of turbulence models , 1992 .

[5]  F. Lien,et al.  Computations of transonic flow with the v2–f turbulence model , 2001 .

[6]  Mohammcd Jalal Ahamcd.  Computational study of turbulent separating flow in an asymmetric plane diffuser , 2004 .

[7]  John K. Eaton,et al.  Experimental investigation of flow through an asymmetric plane diffuser , 2000 .

[8]  P. Durbin.  Near-wall turbulence closure modeling without “damping functions” , 1991, Theoretical and Computational Fluid Dynamics.

[9]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[10]  B. Launder,et al.  Mathematical Models of turbulence , 1972 .

[11]  Parviz Moin,et al.  Study of flow in a planar asymmetric diffuser using large-eddy simulation , 1999, Journal of Fluid Mechanics.

[12]  Gary L. Foutch,et al.  Comparison of near-wall treatment methods for high Reynolds number backward-facing step flow , 2005 .

[13]  Peter Bradshaw,et al.  Understanding and prediction of turbulent flow—1996 , 1997 .

[14]  R. Pletcher,et al.  Computational Fluid Mechanics and Heat Transfer. By D. A ANDERSON, J. C. TANNEHILL and R. H. PLETCHER. Hemisphere, 1984. 599 pp. $39.95. , 1986, Journal of Fluid Mechanics.

[15]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[16]  B. Launder,et al.  Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc , 1974 .

[17]  Gianluca Iaccarino,et al.  Predictions of a turbulent separated flow using commercial CFD codes , 2001 .

[18]  Chia-Jung Hsu.  Numerical Heat Transfer and Fluid Flow , 1981 .

[19]  Weeratunge Malalasekera,et al.  An introduction to computational fluid dynamics - the finite volume method , 2007 .

[20]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .