Characterization of Active Cooling and Flow Distribution in Microvascular Polymers

Two- and three-dimensional microvascular networks embedded within a polymer fin were fabricated via direct write assembly to demonstrate cooling potential of vascular polymer structures. Thin fin cooling experiments were carried out utilizing water and polyalphaolefin (PAO) oil-based coolant as the working fluids. The surface temperature of the fin was monitored using an infrared camera and flow distribution within the network was evaluated by microscopic particle image velocimetry. The effective heat transfer coefficient was increased 53-fold at low Reynolds number for water cooling in both 2D and 3D geometries. However, 3D architectures offer more uniform flow distribution and the ability to efficiently adapt to blockages and reroute flow within the network. Microvascular materials are excellent candidates for compact, efficient cooling platforms for a variety of applications and 3D architectures offer unique performance enhancements.

[1]  D. C. Price.  Thermal management of military fighter aircraft electro-optics pod: an invited paper , 2003, Ninteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2003..

[2]  Adrian Bejan,et al.  DESIGN WITH CONSTRUCTAL THEORY: VASCULARIZED AND DISTRIBUTED ENERGY SYSTEMS , 2008 .

[3]  David E. Goldberg,et al.  Design of microvascular flow networks using multi-objective genetic algorithms , 2008 .

[4]  J. Lewis,et al.  Fugitive Inks for Direct‐Write Assembly of Three‐Dimensional Microvascular Networks , 2005 .

[5]  Adrian Bejan,et al.  Design with constructal theory , 2008 .

[6]  J. A. Lewis.  Direct Ink Writing of 3D Functional Materials , 2006 .

[7]  Ahmad K. Sleiti.  Advanced cooling technology for rotors of high‐power low‐duty cycle generators using polyalphaolefins , 2007 .

[8]  Ronald Adrian,et al.  PIV Sleuth: Integrated Particle Image Velocimetry (PIV) Interrogation/Validation Software ⁄ , 2001 .

[9]  J. Lewis,et al.  Self‐Healing Materials with Interpenetrating Microvascular Networks , 2009 .

[10]  J. Selman,et al.  Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution , 2008 .

[11]  Xianguo Li,et al.  Effect of flow and temperature distribution on the performance of a PEM fuel cell stack , 2006 .

[12]  S. Martel,et al.  PCB-Integrated Heat Exchanger for Cooling Electronics Using Microchannels Fabricated With the Direct-Write Method , 2008, IEEE Transactions on Components and Packaging Technologies.

[13]  J. Lewis,et al.  Self-healing materials with microvascular networks. , 2007, Nature materials.

[14]  J. Paschkewitz.  Exposure testing of dielectric liquids for aircraft EHD heat exchanger applications , 1998, 1998 Annual Report Conference on Electrical Insulation and Dielectric Phenomena (Cat. No.98CH36257).

[15]  J.D. Meindl,et al.  Integrated thermal-fluidic I/O interconnects for an on-chip microchannel heat sink , 2006, IEEE Electron Device Letters.

[16]  Duncan M. Price,et al.  Thermal conductivity of PTFE and PTFE composites , 2002 .

[17]  J. Lewis,et al.  Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly , 2003, Nature materials.

[18]  M. Patterson,et al.  Experimental and Numerical Study of a Stacked Microchannel Heat Sink for Liquid Cooling of Microelectronic Devices , 2007 .

[19]  M. Allen,et al.  Active cooling substrates for thermal management of microelectronics , 2005, IEEE Transactions on Components and Packaging Technologies.

[20]  R. Pease,et al.  High-performance heat sinking for VLSI , 1981, IEEE Electron Device Letters.

[21]  D. Beebe,et al.  A particle image velocimetry system for microfluidics , 1998 .

[22]  Brandon Arritt,et al.  Experimental Analysis of a Biologically Inspired Thermal-Structural Satellite Panel , 2008 .

[23]  Sangseok Yu,et al.  Thermal management strategy for a proton exchange membrane fuel cell system with a large active cell area , 2008 .

[24]  Adrian Bejan,et al.  Vascular structures with flow uniformity and small resistance , 2009 .

[25]  A. Lehtovaara,et al.  An approach for determination of lubricant properties at elliptical elastohydrodynamic contacts using a twin-disc test device and a numerical traction model , 2008 .