A Comprehensive Review on Additive Manufacturing of Glass: Recent Progress and Future Outlook

[1]  Hao Li,et al.  A Review of Spatter in Laser Powder Bed Fusion Additive Manufacturing: In Situ Detection, Generation, Effects, and Countermeasures , 2022, Micromachines.

[2]  P. Colombo,et al.  Hybrid additive manufacturing for the fabrication of freeform transparent silica glass components , 2022, Additive Manufacturing.

[3]  Xiangjia Li,et al.  Recent Advancements and Applications in 3D Printing of Functional Optics , 2022, Additive Manufacturing.

[4]  N. Pala,et al.  Additive manufacturing of borosilicate glass via stereolithography , 2022, Ceramics International.

[5]  Zifeng Lu,et al.  Overview of 3D-Printed Silica Glass , 2022, Micromachines.

[6]  E. Bernardo,et al.  Additive manufacturing of Ca–Mg silicate scaffolds supported by flame-synthesized glass microspheres , 2021, Ceramics International.

[7]  H. Taylor,et al.  High fidelity volumetric additive manufacturing , 2021, Additive Manufacturing.

[8]  C. Greiner,et al.  Melt‐Extrusion‐Based Additive Manufacturing of Transparent Fused Silica Glass , 2021, Advanced science.

[9]  P. Ajayan,et al.  3D-printed silica with nanoscale resolution , 2021, Nature Materials.

[10]  B. Rapp,et al.  Volumetric additive manufacturing of silica glass with microscale computed axial lithography , 2021, Science.

[11]  A. Studart,et al.  Hierarchical porous materials made by stereolithographic printing of photo-curable emulsions , 2021, Scientific Reports.

[12]  Rongguang Liang,et al.  Three-dimensional printing of glass micro-optics , 2021 .

[13]  E. Pun,et al.  Revealing the multicolor mechanism in borotellurite glass phosphor: From individual emission of dual-modes to WLED applications , 2021 .

[14]  H. Zappe,et al.  High-throughput injection molding of transparent fused silica glass , 2021, Science.

[15]  Guo Liu,et al.  Additive manufacturing of structural materials , 2021, Materials Science and Engineering: R: Reports.

[16]  Sefiu Abolaji Rasaki,et al.  Photopolymerization-based additive manufacturing of ceramics: A systematic review , 2021, Journal of Advanced Ceramics.

[17]  S. Kaierle,et al.  Additive manufacturing of fused silica using coaxial laser glass deposition: experiment, simulation, and discussion , 2021, LASE.

[18]  Xinliang Zhang,et al.  Preface to the special issue on “Terahertz Science and Applications” , 2021, Frontiers of Optoelectronics.

[19]  Xiaohong Sun,et al.  Dense ceramics with complex shape fabricated by 3D printing: A review , 2021, Journal of Advanced Ceramics.

[20]  I. Ashcroft,et al.  Laser powder bed fusion of soda lime silica glass: Optimisation of processing parameters and evaluation of part properties , 2021, Additive Manufacturing.

[21]  K. Essa,et al.  Micro-fabrication of ceramics: Additive manufacturing and conventional technologies , 2021, Journal of Advanced Ceramics.

[22]  M. Thiel,et al.  Two‐Photon Polymerization of Nanocomposites for the Fabrication of Transparent Fused Silica Glass Microstructures , 2021, Advanced materials.

[23]  L. Gallais,et al.  3D printing of silica glass through a multiphoton polymerization process. , 2020, Optics letters.

[24]  Nikola A. Dudukovic,et al.  3D printed gradient index glass optics , 2020, Science Advances.

[25]  D. Bernard,et al.  Direct 3D-printing of phosphate glass by fused deposition modeling , 2020, Materials & Design.

[26]  E. Matioli,et al.  Co-designing electronics with microfluidics for more sustainable cooling , 2020, Nature.

[27]  J. Tong,et al.  Laser-assisted embedding of all-glass optical fiber sensors into bulk ceramics for high-temperature applications. , 2020, Optics and laser technology.

[28]  T. Do,et al.  FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments , 2020, Polymers.

[29]  Liang Guo,et al.  Effects of slurry mixing methods and solid loading on 3D printed silica glass parts based on DLP stereolithography , 2020 .

[30]  J. Qiu,et al.  Highly efficient phosphor-glass composites by pressureless sintering , 2020, Nature Communications.

[31]  Jianzhong Fu,et al.  A Review of 3D Printing Technologies for Soft Polymer Materials , 2020, Advanced Functional Materials.

[32]  K. Essa,et al.  A Review on Functionally Graded Materials and Structures via Additive Manufacturing: From Multi‐Scale Design to Versatile Functional Properties , 2020, Advanced Materials Technologies.

[33]  Jinqing Peng,et al.  3D Printed Smart Windows for Adaptive Solar Modulations , 2020, Advanced Optical Materials.

[34]  Yizheng Chen,et al.  Information integrated glass module fabricated by integrated additive and subtractive manufacturing. , 2020, Optics letters.

[35]  R. Buczyński,et al.  Direct Ink Writing Glass: A Preliminary Step for Optical Application , 2020, Materials.

[36]  Stefan Nolte,et al.  Laser powder bed fusion of glass: a comparative study between CO2 lasers and ultrashort laser pulses , 2020, LASE.

[37]  A. Jérusalem,et al.  Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties , 2020, Materials & Design.

[38]  C. Moser,et al.  High-resolution tomographic volumetric additive manufacturing , 2020, Nature Communications.

[39]  H. Giessen,et al.  Highly Efficient Dual-Fiber Optical Trapping with 3D Printed Diffractive Fresnel Lenses , 2020, ACS Photonics.

[40]  Nikola A. Dudukovic,et al.  Additive manufacturing of optical quality germania-silica glasses. , 2020, ACS applied materials & interfaces.

[41]  Yizheng Chen,et al.  3D Printing of All-Glass Fiber-Optic Pressure Sensor for High Temperature Applications , 2019, IEEE Sensors Journal.

[42]  D. Moore,et al.  Three-dimensional printing of multicomponent glasses using phase-separating resins , 2019, Nature Materials.

[43]  Jianzhong Zhang,et al.  Silica optical fiber drawn from 3D printed preforms. , 2019, Optics letters.

[44]  H. Ebendorff‐Heidepriem,et al.  Recent Advances in Hybrid Optical Materials: Integrating Nanoparticles within a Glass Matrix , 2019, Advanced Optical Materials.

[45]  Jie Yin,et al.  High-power laser-matter interaction during laser powder bed fusion , 2019, Additive Manufacturing.

[46]  K. Essa,et al.  Additive manufacturing high performance graphene-based composites: A review , 2019, Composites Part A: Applied Science and Manufacturing.

[47]  Y. Messaddeq,et al.  3D-printing of arsenic sulfide chalcogenide glasses , 2019, Optical Materials Express.

[48]  A. Gurlo,et al.  Additive manufacturing of ceramics from preceramic polymers: A versatile stereolithographic approach assisted by thiol-ene click chemistry , 2019, Additive Manufacturing.

[49]  Ian Ashcroft,et al.  Additive manufacturing of glass with laser powder bed fusion , 2019, Journal of the American Ceramic Society.

[50]  Maxim Shusteff,et al.  Volumetric additive manufacturing via tomographic reconstruction , 2019, Science.

[51]  N. Oxman,et al.  Additive Manufacturing of Transparent Glass Structures , 2018, 3D Printing and Additive Manufacturing.

[52]  Joseph A. Drallmeier,et al.  Sensing and control in glass additive manufacturing , 2018, Mechatronics.

[53]  M. Farsari,et al.  Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics , 2018, Advanced optical materials.

[54]  J. Qiu,et al.  3D printing of multicolor luminescent glass , 2018, RSC advances.

[55]  Nikola A. Dudukovic,et al.  Predicting Nanoparticle Suspension Viscoelasticity for Multimaterial 3D Printing of Silica–Titania Glass , 2018, ACS Applied Nano Materials.

[56]  Abdul W. Basit,et al.  Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs , 2018, International journal of pharmaceutics.

[57]  Nikola A. Dudukovic,et al.  3D Printed Optical Quality Silica and Silica–Titania Glasses from Sol–Gel Feedstocks , 2018 .

[58]  S. Magdassi,et al.  Additive Manufacturing of Transparent Silica Glass from Solutions. , 2018, ACS applied materials & interfaces.

[59]  L. Tong,et al.  Additive manufacturing of silica glass using laser stereolithography with a top-down approach and fast debinding , 2018, RSC advances.

[60]  Liwei Lin,et al.  3D printed microfluidics and microelectronics , 2018 .

[61]  Augustine Urbas,et al.  Additive manufacturing of transparent fused quartz , 2018 .

[62]  Bastian E. Rapp,et al.  Additive manufacturing of microfluidic glass chips , 2018, BiOS.

[63]  J. Canales‐Vázquez,et al.  Fabrication and characterisation of ceramics via low-cost DLP 3D printing , 2017 .

[64]  Rebecca Dylla-Spears,et al.  3D‐Printed Transparent Glass , 2017, Advanced materials.

[65]  D. Bristow,et al.  Additive Manufacturing of Transparent Soda-Lime Glass Using a Filament-Fed Process , 2017 .

[66]  Chee Kai Chua,et al.  Fundamentals and applications of 3D printing for novel materials , 2017 .

[67]  W. Bauer,et al.  Three-dimensional printing of transparent fused silica glass , 2017, Nature.

[68]  Eleonora Atzeni,et al.  Overview on Additive Manufacturing Technologies , 2017, Proceedings of the IEEE.

[69]  A. Gusarov,et al.  Manufacturing individual beads of quartz glass via the selective laser melting of its powder , 2016 .

[70]  Martine Dubé,et al.  Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications , 2016, Advanced materials.

[71]  Timothy Reissman,et al.  Additive Manufacturing of a 3D Terahertz Gradient‐Refractive Index Lens , 2016 .

[72]  Andrey V. Gusarov,et al.  Crack-free selective laser melting of silica glass: single beads and monolayers on the substrate of the same material , 2016 .

[73]  H. Giessen,et al.  Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres , 2016, Nature Communications.

[74]  M. Worgull,et al.  Liquid Glass: A Facile Soft Replication Method for Structuring Glass , 2016, Advanced materials.

[75]  Augustine Urbas,et al.  Additive manufacturing of glass for optical applications , 2016, SPIE LASE.

[76]  Andrew D. Maynard,et al.  Navigating the fourth industrial revolution. , 2015, Nature nanotechnology.

[77]  RamaGopal V. Sarepaka,et al.  Experimental Investigation of Material Removal and Surface Roughness during Optical Glass Polishing , 2015 .

[78]  N. Shamsaei,et al.  An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics , 2015 .

[79]  W. Xiang,et al.  Carbon dot-doped sodium borosilicate gel glasses with emission tunability and their application in white light emitting diodes , 2015 .

[80]  Bastian E. Rapp,et al.  Rapid prototyping of glass microfluidic chips , 2015, Photonics West - Biomedical Optics.

[81]  Jean-Pierre Kruth,et al.  Additive manufacturing of ceramics: A review , 2014 .

[82]  Heng Pan,et al.  Additive Manufacturing of Glass , 2014 .

[83]  Michael C. McAlpine,et al.  3D printed quantum dot light-emitting diodes. , 2014, Nano letters.

[84]  Robert J. Strong,et al.  A review of melt extrusion additive manufacturing processes: I. Process design and modeling , 2014 .

[85]  Patrick S Doyle,et al.  Universal process-inert encoding architecture for polymer microparticles. , 2014, Nature materials.

[86]  Ryan B. Wicker,et al.  3D Printing multifunctionality: structures with electronics , 2014 .

[87]  E. Jang,et al.  Highly luminescent and photostable quantum dot-silica monolith and its application to light-emitting diodes. , 2013, ACS nano.

[88]  Christopher M Spadaccini,et al.  Photocurable Liquid Core–Fugitive Shell Printing of Optical Waveguides , 2011, Advanced materials.

[89]  Eugen Axinte,et al.  Glasses as engineering materials: A review , 2011 .

[90]  Nicholas X. Fang,et al.  Projection micro-stereolithography using digital micro-mirror dynamic mask , 2005 .

[91]  Walter M. Duncan,et al.  Emerging digital micromirror device (DMD) applications , 2003, SPIE MOEMS-MEMS.

[92]  Vijay K. Varadan,et al.  Micro stereo lithography and fabrication of 3D MEMS and their applications , 2001, SPIE Micro + Nano Materials, Devices, and Applications.

[93]  S. Kawata,et al.  Three-dimensional microfabrication with two-photon-absorbed photopolymerization. , 1997, Optics letters.

[94]  F. Laguarta,et al.  Optical glass polishing by controlled laser surface-heat treatment. , 1994, Applied optics.

[95]  Peter M. Rentzepis,et al.  Two-photon volume information storage in doped polymer systems , 1990 .

[96]  P. Heide,et al.  Etching of thin SiO2 layers using wet HF gas , 1989 .

[97]  P. Richet,et al.  Thermodynamic properties of quartz, cristobalite and amorphous SiO2: drop calorimetry measurements between 1000 and 1800 K and a review from 0 to 2000 K , 1982 .

[98]  John D. Mackenzie,et al.  Glasses from melts and glasses from gels, a comparison , 1982 .

[99]  Jie Yin,et al.  Correlation between forming quality and spatter dynamics in laser powder bed fusion , 2020 .

[100]  F. Kotz,et al.  3D Printing of Transparent Glasses , 2020 .

[101]  Laura Thurn,et al.  Operating limits for beam melting of glass materials , 2019, MATEC Web of Conferences.

[102]  Stefan Kaierle,et al.  Additive manufacturing of glass: CO2-Laser glass deposition printing , 2018 .

[103]  A. Gusarov,et al.  Selective laser melting of fused silica: Interdependent heat transfer and powder consolidation , 2017 .

[104]  C. Malça,et al.  Direct Digital Manufacturing: A Challenge to the Artistic Glass Production , 2017 .

[105]  Shreya H Dave,et al.  Additive Manufacturing of Optically Transparent Glass , 2015 .

[106]  Andreas Gebhardt,et al.  Selective Laser Melting of Soda-Lime Glass Powder , 2015 .

[107]  D. Bouzid,et al.  Correlation between contact surface and friction during the optical glass polishing , 2014 .

[108]  Andrey V. Gusarov,et al.  On the Possibility of Selective Laser Melting of Quartz Glass , 2014 .

[109]  E. Fortunato,et al.  Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances , 2012, Advanced materials.

[110]  Andreas Schmitz,et al.  Energy consumption and CO2 emissions of the European glass industry , 2011 .

[111]  Hiroshi Gokan,et al.  Dry Etch Resistance of Organic Materials , 1983 .