Hydrogen production by catalytic partial oxidation of methane and propane on Ni and Pt catalysts

In recent years the catalytic partial oxidation has been taken into consideration as a suitable process for hydrogen production, because of its exothermic nature which makes the process less energy and capital cost intensive with respect to steam reforming. In this paper the behaviour of three different catalyst typologies, two based on Ni–Al2O3 (different in active phase composition) and one constituted by Pt supported on CeO2, is studied for partial oxidation of propane (as representative of liquefied petroleum gas). For comparison the same catalysts have been tested also in methane partial oxidation. The catalytic properties have been evaluated in terms of yield and selectivity to H2 and carbon compounds as function of reaction temperature, space velocity and air/fuel molar ratio, by using a not diluted mixture as feed. Durability and temperature programmed oxidation (TPO) tests have been carried out in order to investigate the catalyst stability and resistance towards carbon deposition. The results evidenced high selectivity of Ni catalysts and the potentialities of Pt–CeO2 interaction in hydrogen production and in limiting carbon deposition, thanks to properties of ceria as oxygen carrier. 2006 International Association for Hydrogen Energy. Published by Elsevier Ltd. All rights reserved.

[1]  J. Fierro,et al.  New catalytic routes for syngas and hydrogen production , 1996 .

[2]  T. Salmi,et al.  Chemisorption and TPD studies of hydrogen on Ni/Al2O3 , 1996 .

[3]  Thomas Aicher,et al.  Catalytic autothermal reforming of Jet fuel , 2005 .

[4]  L. Schmidt,et al.  Comparison of monolith-supported metals for the direct oxidation of methane to syngas , 1994 .

[5]  E. Kikuchi,et al.  Syngas formation by partial oxidation of methane in palladium membrane reactor , 1998 .

[6]  J. Armor,et al.  The multiple roles for catalysis in the production of H2 , 1999 .

[7]  Malcolm L. H. Green,et al.  Recent advances in the conversion of methane to synthesis gas , 1995 .

[8]  Kiyoshi Otsuka,et al.  Direct partial oxidation of methane to synthesis gas by cerium oxide , 1998 .

[9]  David A. J. Rand,et al.  Fuel cells for road transportation purposes — yes or no? , 2001 .

[10]  Lidia Pino,et al.  Catalytic partial-oxidation of methane on a ceria-supported platinum catalyst for application in fuel cell electric vehicles , 2002 .

[11]  B. S. Çağlayan,et al.  Production of hydrogen over bimetallic Pt–Ni/δ-Al2O3: II. Indirect partial oxidation of LPG , 2005 .

[12]  Mario Conte,et al.  Hydrogen economy for a sustainable development: state-of-the-art and technological perspectives , 2001 .

[13]  I. A. Zolotarskii,et al.  Partial oxidation of methane to synthesis gas over supported catalysts based on Pt-promoted mixed oxides , 2004 .

[14]  E. Ruckenstein,et al.  Catalytic partial oxidation of methane to synthesis gas over γ-Al2O2-supported rhodium catalysts , 1999 .

[15]  P. Cheekatamarla,et al.  Efficient bimetallic catalysts for hydrogen generation from diesel fuel , 2005 .

[16]  Anders Holmen,et al.  Catalytic partial oxidation of methane to synthesis gas , 1995 .

[17]  J. Rostrup-Nielsen.  Coking on nickel catalysts for steam reforming of hydrocarbons , 1974 .

[18]  Ryuji Kikuchi,et al.  Catalytic autothermal reforming of methane and propane over supported metal catalysts , 2003 .

[19]  P. Pfeifer,et al.  Temperature profiles and residence time effects during catalytic partial oxidation and oxidative steam reforming of propane in metallic microchannel reactors , 2005 .

[20]  R. Kikuchi,et al.  Partial oxidation of CH4 and C3H8 over hexaaluminate-type oxides , 2005 .

[21]  N. Abatzoglou,et al.  Steam reforming of naphthalene on Ni–Cr/Al2O3 catalysts doped with MgO, TiO2, and La2O3 , 1998 .

[22]  J. Walmsley,et al.  Small-scale hydrogen production from propane , 2005 .

[23]  Runyu Ma,et al.  Characterization of alumina-supported Ni and Ni-Pd catalysts for partial oxidation and steam reforming of hydrocarbons , 2003 .

[24]  D. Trimm,et al.  Alternative catalyst bed configurations for the autothermic conversion of methane to hydrogen , 1996 .

[25]  David L. Trimm,et al.  Coke formation and minimisation during steam reforming reactions , 1997 .

[26]  V. Antonucci,et al.  Technology up date and new strategies on fuel cells , 2001 .