A 60 GHz ultra low-power wake-up radio

This work presents an ultra low-power duty-cycled wake-up radio system for high-data-rate, short-range millimeter-wave WPAN applications. The asynchronous duty-cycled wake-up power management method is proposed and optimized to reduce the average power consumption. As the design example, a 60 GHz radio system is discussed, which consists of a 4-path phase-array transceiver, a duty-cycled wake-up receiver and the digital control circuits. Theoretical analyses of the optimum duty-cycle factor towards minimum average power are shown accordingly. Simulation results are given and a 230 µW average power consumption is achieved for the entire radio, which leads to about 4000-hour operation time for a 1.5-V 1000-mAh re-chargeable battery.

[1]  Arthur van Roermund,et al.  A low-power, high-sensitivity injection-locked oscillator for 60 GHz WPAN applications , 2009, 2009 Asia Pacific Conference on Postgraduate Research in Microelectronics & Electronics (PrimeAsia).

[2]  Theodore S. Rappaport,et al.  Short-Range Wireless Communications for Next-Generation Networks: UWB, 60 GHz Millimeter-Wave WPAN, And ZigBee , 2007, IEEE Wireless Communications.

[3]  Piet Wambacq,et al.  A wideband beamformer for a phased-array 60GHz receiver in 40nm digital CMOS , 2010, 2010 IEEE International Solid-State Circuits Conference - (ISSCC).

[4]  Wei Deng,et al.  Wireless wire-the 60 GHz ultra-low power radio system , 2009, 2009 IEEE Radio and Wireless Symposium.

[5]  B. Razavi,et al.  A 60-GHz CMOS receiver front-end , 2006, IEEE Journal of Solid-State Circuits.

[6]  John S. Heidemann,et al.  Ultra-low duty cycle MAC with scheduled channel polling , 2006, SenSys '06.