Modeling heat transfer between a freeze pipe and the surrounding ground during artificial ground freezing activities

Abstract The artificial ground freezing method (AGF) is widely used in civil and mining engineering. In AGF numerical models, the thermal boundary conditions at the freeze pipe wall, whether they be expressed in temperature or in flux, are generally determined based on in situ measurements, which are not readily available. The purpose of this paper is to study the complete heat transfer problem in order to develop a thermal model that can be easily used in field applications. In this numerical model, the freeze pipe and the surrounding ground are considered in a coupled way. External data of temperature or flux at the pipe wall is therefore not needed to predict the temperature evolution in the ground. Moreover, the developed model can be used to conduct parametric studies on operating conditions, refrigerant type, system geometry or ground properties. Indeed, the reduction of the heat transfer problems in the ground and in the pipe into highly time-saving 1D problems allows the rapid resolution of many calculations. Then, the developed model can also find its use in the optimization and the design of AGF systems.

[1]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[2]  B. Jiang,et al.  Least-squares finite element method for fluid dynamics , 1990 .

[3]  B. Kurylyk,et al.  The mathematical representation of freezing and thawing processes in variably-saturated, non-deformable soils , 2013 .

[4]  Zhen Liu,et al.  Coupled thermo-hydro-mechanical model for porous materials under frost action: theory and implementation , 2011 .

[5]  R. Rigon,et al.  Coupled Water and Heat Transfer in Permafrost Modeling , 2010 .

[6]  K. M. Neaupane,et al.  Simulation of a fully coupled thermo–hydro–mechanical system in freezing and thawing rock , 1999 .

[7]  Orlando B. Andersland,et al.  Frozen Ground Engineering , 2003 .

[8]  David J. Edwards,et al.  SIMULATING THE GROUND FREEZING PROCESS: A DECISION SUPPORT MODEL , 2005 .

[9]  G. Wilson,et al.  Heat and mass transfer in unsaturated soils during freezing , 1997 .

[10]  R. D. Miller,et al.  Soil Freezing and Soil Water Characteristic Curves , 1966 .

[11]  B. S. Petukhov.  Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical Properties , 1970 .

[12]  Xiong Yu,et al.  Theoretical basis for modeling porous geomaterials under frost actions: A review , 2012 .

[13]  Van Genuchten,et al.  A closed-form equation for predicting the hydraulic conductivity of unsaturated soils , 1980 .

[14]  O. Stab,et al.  A semi-analytical approach for modelling heat transfer during salt-cavern leaching process , 2008 .

[15]  Masaru Mizoguchi,et al.  Water Flow and Heat Transport in Frozen Soil , 2004 .

[16]  J. Konrad,et al.  A generalized thermal conductivity model for soils and construction materials , 2005 .

[17]  Donald I. Norum,et al.  Heat and mass transfer in a freezing unsaturated porous medium. , 1980 .

[18]  Georg Anagnostou,et al.  Numerical interpretation of temperature distributions from three ground freezing applications in urban tunnelling , 2012 .

[19]  Jean-François Thimus,et al.  Investigation of Water to Ice Phase Change in Porous Media by Ultrasonic and Dielectric Measurements , 2009 .

[20]  R. Harlan,et al.  Analysis of coupled heat‐fluid transport in partially frozen soil , 1973 .

[21]  Masaru Mizoguchi,et al.  Water Flow and Heat Transport in Frozen Soil: Numerical Solution and Freeze–Thaw Applications , 2004 .

[22]  Xianjun Tan,et al.  Water flow and heat transport including ice/water phase change in porous media: Numerical simulation and application , 2011 .

[23]  Antonio Gens,et al.  THM-coupled finite element analysis of frozen soil : formulation and application , 2009 .

[24]  Per E. Frivik,et al.  State-of-the-Art Report. Ground Freezing: Thermal Properties, Modelling of Processes and Thermal Design , 1981 .