Perovskite Photovoltaics: The Path to a Printable Terawatt-Scale Technology
暂无分享,去创建一个
Kai Zhu | Sarah Kurtz | Mowafak Al-Jassim | Yanfa Yan | Joseph J. Berry | Jao van de Lagemaat | S. Kurtz | J. Berry | J. Lagemaat | Yanfa Yan | K. Zhu | M. Al‐Jassim
[1] L. Quan,et al. SOLAR CELLS: Efficient and stable solution‐processed planar perovskite solar cells via contact passivation , 2017 .
[2] K. Catchpole,et al. Rubidium Multication Perovskite with Optimized Bandgap for Perovskite‐Silicon Tandem with over 26% Efficiency , 2017 .
[3] D. C. Law,et al. 35.8% space and 38.8% terrestrial 5J direct bonded cells , 2014, 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC).
[4] Anders Hagfeldt,et al. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance , 2016, Science.
[5] Xudong Yang,et al. A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules , 2017, Nature.
[6] A. D. Vos,et al. Detailed balance limit of the efficiency of tandem solar cells , 1980 .
[7] Jinsong Huang,et al. Quantification of re-absorption and re-emission processes to determine photon recycling efficiency in perovskite single crystals , 2017, Nature Communications.
[8] Kai Zhu,et al. Perovskite Solar Cells—Towards Commercialization , 2017 .
[9] Dong Hoe Kim,et al. Selective dissolution of halide perovskites as a step towards recycling solar cells , 2016, Nature Communications.
[10] Richard H. Friend,et al. Photon recycling in lead iodide perovskite solar cells , 2016, Science.
[11] Gregg S. Higashi,et al. Flexible Thin-Film Tandem Solar Cells With >30% Efficiency , 2014, IEEE Journal of Photovoltaics.
[12] Ilke Celik,et al. A technoeconomic analysis of perovskite solar module manufacturing with low-cost materials and techniques , 2017 .
[13] A. Tiwari,et al. High-efficiency inverted semi-transparent planar perovskite solar cells in substrate configuration , 2016, Nature Energy.
[14] T. Bein,et al. Recycling Perovskite Solar Cells To Avoid Lead Waste. , 2016, ACS applied materials & interfaces.
[15] Kai Zhu,et al. Low-bandgap mixed tin–lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells , 2017, Nature Energy.
[16] Richard E. Smalley,et al. Future Global Energy Prosperity: The Terawatt Challenge , 2005 .
[17] K. Yoshikawa,et al. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26% , 2017, Nature Energy.
[18] Emmanuel Kymakis,et al. Graphene Interface Engineering for Perovskite Solar Modules: 12.6% Power Conversion Efficiency over 50 cm2 Active Area , 2017 .
[19] A. Jen,et al. Highly Efficient Perovskite–Perovskite Tandem Solar Cells Reaching 80% of the Theoretical Limit in Photovoltage , 2017, Advanced materials.
[20] Sergei Tretiak,et al. High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells , 2016, Nature.
[21] Atul K. Jain,et al. Energy implications of future stabilization of atmospheric CO2 content , 1998, Nature.
[22] Jonathan P. Mailoa,et al. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability , 2017, Nature Energy.
[23] Nripan Mathews,et al. A large area (70 cm2) monolithic perovskite solar module with a high efficiency and stability , 2016 .
[24] Henry J. Snaith,et al. A low viscosity, low boiling point, clean solvent system for the rapid crystallisation of highly specular perovskite films , 2017 .
[25] M. Green,et al. Supercharging Silicon Solar Cell Performance by Means of Multijunction Concept , 2015, IEEE Journal of Photovoltaics.
[26] Jeannette M. Kadro,et al. Proof-of-concept for facile perovskite solar cell recycling , 2016 .
[27] M. Taguchi,et al. 24.7% Record Efficiency HIT Solar Cell on Thin Silicon Wafer , 2013, IEEE Journal of Photovoltaics.
[28] Zhengshan Yu,et al. Selecting tandem partners for silicon solar cells , 2016, Nature Energy.
[29] H. Queisser,et al. Detailed Balance Limit of Efficiency of p‐n Junction Solar Cells , 1961 .
[30] Kelsey A. W. Horowitz,et al. Raising the one-sun conversion efficiency of III–V/Si solar cells to 32.8% for two junctions and 35.9% for three junctions , 2017, Nature Energy.
[31] Paul Heremans,et al. Nonhazardous Solvent Systems for Processing Perovskite Photovoltaics , 2016 .
[32] W. Warta,et al. Solar cell efficiency tables (version 50) , 2017 .
[33] Kai Zhu,et al. Perovskite ink with wide processing window for scalable high-efficiency solar cells , 2017, Nature Energy.
[34] Varun,et al. LCA of renewable energy for electricity generation systems—A review , 2009 .
[35] Min Gyu Kim,et al. Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells , 2017, Science.
[36] A. Goriely,et al. Plasmonic‐Induced Photon Recycling in Metal Halide Perovskite Solar Cells , 2015 .
[37] Kai Zhu,et al. Towards stable and commercially available perovskite solar cells , 2016, Nature Energy.