论文信息 - Single-Coil Eddy Current Sensors and Their Application for Monitoring the Dangerous States of Gas-Turbine Engines

Single-Coil Eddy Current Sensors and Their Application for Monitoring the Dangerous States of Gas-Turbine Engines

The creation and exploitation of gas turbine engines (GTE) often involve two mutually exclusive tasks related to ensuring the highest reliability while achieving a good economic and environmental performance of the power plant. The value of the radial clearance between the blade tips of the compressor or turbine and the stator is a parameter that has a significant impact on the efficiency and safety of the GTE. However, the radial displacements that form tip clearances are only one of the components of the displacements made by GTE elements due to the action of power loads and thermal deformations during engines’ operation. The impact of loads in conjunction with natural aging is also the reason for the wear of the GTE’s structural elements (for example, bearing assemblies) and the loss of their mechanical strength. The article provides an overview of the methods and tools for monitoring the dangerous states of the GTE (blade tips clearances, impellers and shafts displacements, debris detecting in lubrication system) based on the single-coil eddy current sensor, which remains operational at the temperatures above 1200 °C. The examples of practical application of the systems with such sensors in bench tests of the GTE are given.

Sergey Borovik | Yuriy Sekisov | S. Borovik | Y. Sekisov

[1] Ten-Huei Guo,et al. A Parametric Study of Actuator Requirements for Active Turbine Tip Clearance Control of a Modern High Bypass Turbofan Engine , 2017 .

[2] Zhenxia Liu,et al. Verification and Design of High Precision Eddy Current Sensor for Tip Clearance Measurement , 2018, Volume 6: Ceramics; Controls, Diagnostics, and Instrumentation; Education; Manufacturing Materials and Metallurgy.

[3] Zhenxia Liu,et al. Experimental Investigation of Inductive Sensor Characteristic for Blade Tip Clearance Measurement at High Temperature , 2019, Sensors.

[4] A. V. Shtoda,et al. DESIGN OF AIRCRAFT GAS TURBINE ENGINES , 1964 .

[6] Bruce M. Steinetz,et al. High-pressure-turbine clearance control systems: Current practices and future directions , 2004 .

[7] Kevin J. Melcher,et al. Toward a Fast-Response Active Turbine Tip Clearance Control , 2003 .

[9] K. S. Chana,et al. The Use of Eddy Current Sensors for the Measurement of Rotor Blade Tip Timing: Development of a New Method Based on Integration , 2016 .

[10] A. von Flotow. Blade-Tip Monitoring with Through-the-Case Eddy Current Sensors , 2004 .

[11] Ten-Huei Guo,et al. An investigation of life extending control techniques for gas turbine engines , 2001, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148).