A 10MHz piezoresistive MEMS resonator with high Q

A novel bulk mode MEMS resonator is presented where mechanical motion is detected using the piezoresistive properties of Si. The piezoresistive readout allows for a high transduction efficiency. The transconductance gm obtained in this manner can be many times higher than the admittance Ym obtained in MEMS resonators that use capacitive read-out. By means of a small signal model it is shown that the transconductance is insensitive to geometric scaling, which allows for the realization of miniature high frequency MEMS resonators and oscillators without performance reduction. The piezoresistive detection method is experimentally validated using a 10MHz bulk acoustic mode resonator processed on SOI. Even for a transduction gap as large as 1.3 mum, it is shown that the transconductance can be as high as 90 muS combined with a Q-factor of 125.000.

[1]  Tomi Mattila,et al.  A 12 MHz micromechanical bulk acoustic mode oscillator , 2002 .

[2]  G. Piazza,et al.  Low motional resistance ring-shaped contour-mode aluminum nitride piezoelectric micromechanical resonators for UHF applications , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[3]  J. Kiihamaki,et al.  Fabrication of single crystal silicon resonators with narrow gaps , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[4]  Sheng-Shian Li,et al.  UHF micromechanical extensional wine-glass mode ring resonators , 2003, IEEE International Electron Devices Meeting 2003.

[5]  Lih Feng Cheow,et al.  Dielectrically Transduced Single-Ended to Differential MEMS Filter , 2006, 2006 IEEE International Solid State Circuits Conference - Digest of Technical Papers.