Flow features of the Ahmed body at a low Reynolds number

[1]  Xiao-bai Li,et al.  IDDES simulation of the performance and wake dynamics of the wind turbines under different turbulent inflow conditions , 2022 .

[2]  Yu Zhou,et al.  Recent Advances in Wake Dynamics and Active Drag Reduction of Simple Automotive Bodies , 2021, Applied Mechanics Reviews.

[3]  Seyed Sobhan Aleyasin,et al.  Characteristics of flow past elongated bluff bodies with underbody gaps due to varying inflow turbulence , 2021, Physics of Fluids.

[4]  Guglielmo Minelli,et al.  Assessment of LES, IDDES and RANS approaches for prediction of wakes behind notchback road vehicles , 2021 .

[5]  M. Thompson,et al.  Aspect ratio and the dynamic wake of the Ahmed body , 2021, Experimental Thermal and Fluid Science.

[6]  Correlation between drag variation and rear surface pressure of an Ahmed body , 2021 .

[7]  R. Balachandar,et al.  Effects of approach flow conditions on the unsteady three-dimensional wake structure of a square-back Ahmed body , 2021 .

[8]  Iraj Mortazavi,et al.  Sensitivity analysis of hybrid methods for the flow around the ahmed body with application to passive control with rounded edges , 2021 .

[9]  J. Borée,et al.  Mechanics of bluff body drag reduction during transient near-wake reversals , 2020, Journal of Fluid Mechanics.

[10]  F. Alvi,et al.  Reynolds number and slant angle effects on the flow over a slanted cylinder afterbody , 2020, Journal of Fluid Mechanics.

[11]  Effects of Rear Angle on the Turbulent Wake Flow between Two in-Line Ahmed Bodies , 2020 .

[12]  O. Cadot,et al.  Proper orthogonal decomposition analysis and modelling of the wake deviation behind a squareback Ahmed body , 2019, 1909.13129.

[13]  John Sheridan,et al.  The influence of reduced Reynolds number on the wake of the DrivAer estate vehicle , 2019, Journal of Wind Engineering and Industrial Aerodynamics.

[14]  M. Passmore,et al.  Low-frequency wake dynamics for a square-back vehicle with side trailing edge tapers , 2019, Journal of Wind Engineering and Industrial Aerodynamics.

[15]  F. Alvi,et al.  Time-averaged three-dimensional flow topology in the wake of a simplified car model using volumetric PIV , 2018, Experiments in Fluids.

[16]  I. Kohri,et al.  Large-Scale Separated Vortex Generated in a Wake Flow of Ahmed’s Body , 2018, Flow, Turbulence and Combustion.

[17]  B. Şahin,et al.  Experimental investigation of the flow around a simplified ground vehicle under effects of the steady crosswind , 2018, International Journal of Heat and Fluid Flow.

[18]  E. Guilmineau.  Effects of Rear Slant Angles on the Flow Characteristics of the Ahmed Body by IDDES Simulations , 2018 .

[19]  Guglielmo Minelli,et al.  On the two flow states in the wake of a hatchback Ahmed body , 2018 .

[20]  P. Queutey,et al.  Assessment of hybrid RANS-LES formulations for flow simulation around the Ahmed body , 2015, Computers & Fluids.

[21]  Marcin Sosnowski,et al.  The influence of computational domain discretization on CFD results concerning aerodynamics of a vehicle , 2018 .

[22]  O. Cadot,et al.  On multistabilities of real car's wake , 2017 .

[23]  A. S. Morgans,et al.  Simulation and feedback control of the Ahmed body flow exhibiting symmetry breaking behaviour , 2017, Journal of Fluid Mechanics.

[24]  Besir Sahin,et al.  Computational and experimental investigations of the vortical flow structures in the near wake region downstream of the Ahmed vehicle model , 2016 .

[25]  T. Barber,et al.  The aerodynamic effects on a cornering Ahmed body , 2016 .

[26]  I. Kohri,et al.  Numerical Analysis on the Transitional Mechanism of the Wake Structure of the Ahmed Body , 2016 .

[27]  I. Kohri,et al.  Experimental Analysis on the Transitional Mechanism of the Wake Structure of the Ahmed Body , 2016 .

[28]  Fabien Harambat,et al.  Influence of afterbody rounding on the pressure distribution over a fastback vehicle , 2016 .

[29]  Bernd R. Noack,et al.  Bluff body drag manipulation using pulsed jets and Coanda effect , 2015, Journal of Fluid Mechanics.

[30]  Zhou Yu,et al.  Aerodynamic drag reduction of an Ahmed body based on deflectors , 2016 .

[31]  Matt Corallo,et al.  Effect of aspect ratio on the near-wake flow structure of an Ahmed body , 2015 .

[32]  S. To,et al.  Unsteady flow structures around a high-drag Ahmed body , 2015, Journal of Fluid Mechanics.

[33]  M. Thompson,et al.  The effect of aspect ratio on the wake of the Ahmed body , 2015 .

[34]  L. Pastur,et al.  Imperfect supercritical bifurcation in a three-dimensional turbulent wake. , 2015, Physical review. E, Statistical, nonlinear, and soft matter physics.

[35]  Connection between base drag, separating boundary layer characteristics and wake mean recirculation length of an axisymmetric blunt-based body , 2015 .

[36]  Song Fu,et al.  Improved-Delayed-Detached-Eddy Simulation of cavity-induced transition in hypersonic boundary layer , 2015 .

[37]  Sinisa Krajnovic.  Large Eddy Simulation Exploration of Passive Flow Control Around an Ahmed Body , 2014 .

[38]  Veli Ozbolat,et al.  Effects of rear slant angles on the flow characteristics of Ahmed body , 2014 .

[39]  I. Kohri,et al.  Study on the Transient Behaviour of the Vortex Structure behind Ahmed Body , 2014 .

[40]  Hyungmin Park,et al.  Aerodynamics of Heavy Vehicles , 2014 .

[41]  Besir Sahin,et al.  Experimental and numerical studies of the flow around the Ahmed body , 2013 .

[42]  Jochen Fröhlich,et al.  On simulating the turbulent flow around the Ahmed body: A French–German collaborative evaluation of LES and DES , 2013 .

[43]  O. Cadot,et al.  Turbulent wake past a three-dimensional blunt body. Part 1. Global modes and bi-stability , 2013, Journal of Fluid Mechanics.

[44]  Olivier Cadot,et al.  Reflectional symmetry breaking of the separated flow over three-dimensional bluff bodies. , 2012, Physical review. E, Statistical, nonlinear, and soft matter physics.

[45]  Sandrine Aubrun,et al.  Effects of suppressing the 3D separation on the rear slant on the flow structures around an Ahmed body , 2012 .

[46]  O. Cadot,et al.  On experimental sensitivity analysis of the turbulent wake from an axisymmetric blunt trailing edge , 2012 .

[47]  Iraj Mortazavi,et al.  Coupling active and passive techniques to control the flow past the square back Ahmed body , 2010 .

[48]  High-order LES of the flow over a simplified car model , 2009 .

[49]  P. Spalart,et al.  A hybrid RANS-LES approach with delayed-DES and wall-modelled LES capabilities , 2008 .

[50]  E. Serre,et al.  High-order large-eddy simulation of flow over the “Ahmed body” car model , 2008 .

[51]  Emmanuel Guilmineau,et al.  Computational study of flow around a simplified car body , 2008 .

[52]  Iraj Mortazavi,et al.  Passive Control Around the Two-Dimensional Square Back Ahmed Body Using Porous Devices , 2008 .

[53]  Jean-François Beaudoin,et al.  Drag and lift reduction of a 3D bluff body using flaps , 2008 .

[54]  Fabien Anselmet,et al.  Thorough analysis of vortical structures in the flow around a yawed bluff body , 2008 .

[55]  P. Paranthoen,et al.  Dispersion in the near wake of idealized car model , 2006 .

[56]  Sinisa Krajnovic,et al.  Flow Around a Simplified Car, Part 1: Large Eddy Simulation , 2005 .

[57]  Gioacchino Vino,et al.  Flow structures in the near-wake of the Ahmed model , 2005 .

[58]  David Sims-Williams,et al.  The Ahmed Model Unsteady Wake: Experimental and Computational Analyses , 2003 .

[59]  Stefan Becker,et al.  Flow and Turbulence Structures in the Wake of a Simplified Car Model (Ahmed Modell) , 2002 .

[60]  R. J. A. Howard,et al.  Structured and Non-Structured Large Eddy Simulations of the Ahmed Reference Model , 2002 .

[61]  M. Pourquié,et al.  Large eddy simulation of an Ahmed reference model , 2002 .

[62]  Sung-Eun Kim,et al.  Advances in External-Aero Simulation of Ground Vehicles Using the Steady RANS Equations , 2000 .

[63]  Y. Dubief,et al.  On coherent-vortex identification in turbulence , 2000 .

[64]  Robert Dominy,et al.  Experimental investigation into unsteadiness and instability in passenger car aerodynamics , 1998 .

[65]  Jinhee Jeong,et al.  On the identification of a vortex , 1995, Journal of Fluid Mechanics.

[66]  T. Han,et al.  Computational analysis of three-dimensional turbulent flow around a bluff body in ground proximity , 1988 .

[67]  W. Hucho,et al.  Aerodynamics of Road Vehicles , 1987 .

[68]  Gunther Ramm,et al.  Some salient features of the time - averaged ground vehicle wake , 1984 .