Ecodesign theoretical and content analysis: initial proposal for future studies

The aim of this article is to conduct a literature study in a structured manner on the subject ecodesign. For this, a three-stage methodology (Planning, Implementation and Reporting) was used. It was considered in planning: research purpose definition and data source identification; time interval used; criteria for database selection; base tests and; publication type definition. The implementation consists of all the steps from searching databases and use of the criteria to arrive to a final sample of 132 articles that deal with this topic. The reporting is about bibliometric analysis performed on articles. With all these proposed procedures, it is intended, in the end, to demonstrate ways for the researcher to address the issue that he wishes, in this case the ecodesign and also to help identify gaps not yet explored this topic.

[1]  Bernard Grabot,et al.  Knowledge Modeling for Eco-design , 2007, Concurr. Eng. Res. Appl..

[2]  Joachim H. Spangenberg,et al.  Design for Sustainability (DfS): the interface of sustainable production and consumption , 2010 .

[3]  A. Fink Conducting research literature reviews : from paper to the Internet , 1998 .

[4]  Germán Arana-Landín,et al.  Paving the way for the ISO 14006 ecodesign standard: an exploratory study in Spanish companies , 2011 .

[5]  Cristina Gazulla,et al.  Proposal for new quantitative eco-design indicators: a first case study , 2009 .

[6]  Rosalind Malcolm,et al.  Integrated product policy: products and their impact on energy , 2011 .

[7]  Marta Herva,et al.  Application of fuzzy logic for the integration of environmental criteria in ecodesign , 2012, Expert Syst. Appl..

[8]  Kohmei Halada,et al.  New Step of Ecomaterial to Break through the Barrier between Ecomaterial-Selection and Eco-Design , 2002 .

[9]  Ray Jones,et al.  An approach to the EuP Directive and the application of the economic eco-design for complex products , 2007 .

[10]  Carles M. Gasol,et al.  Eco-design in innovation driven companies: perception, predictions and the main drivers of integration. The Spanish example , 2011 .

[11]  Xu Jincheng Ecodesign for wear resistant ductile cast iron with medium manganese content , 2003 .

[12]  Reine Karlsson,et al.  The relationship between environmental analyses and the dialogue process in product development , 2006 .

[13]  J. Allwood,et al.  Development of an eco-ideation tool to identify stepwise greenhouse gas emissions reduction options for consumer goods , 2011 .

[14]  Chris Ryan,et al.  EcoDesign: design and the response to the greening of the international market , 1992 .

[15]  Wilson Kindlein,et al.  Methodology of ecodesign for the development of more sustainable electro-electronic equipments , 2008 .

[16]  Michael McGuire,et al.  Integrating sustainable waste management into product design: sustainability as a functional requirement , 2010 .

[17]  Jahau Lewis Chen,et al.  Forecasting the design of eco-products by integrating TRIZ evolution patterns with CBR and Simple LCA methods , 2012, Expert Syst. Appl..

[18]  Anna Lewandowska,et al.  ISO 14062 in theory and practice—ecodesign procedure. Part 2: practical application , 2010 .

[19]  Joan Rieradevall,et al.  El ecodiseño y planeamiento de barrios sostenibles: el caso de estudio de Vallbona (Barcelona) , 2011 .

[20]  Rita Puig,et al.  LCA and ecodesign in the toy industry: case study of a teddy bear incorporating electric and electronic components , 2009 .

[21]  J. Zufia,et al.  Life cycle assessment to eco-design food products: industrial cooked dish case study , 2008 .

[22]  Tak Hur,et al.  Simplified LCA and matrix methods in identifying the environmental aspects of a product system. , 2005, Journal of environmental management.

[23]  Paul Knight,et al.  Adopting and applying eco-design techniques: a practitioners perspective , 2009 .

[24]  Amine Hadj Taieb,et al.  Sensitising Children to Ecological Issues through Textile Eco-Design , 2010 .

[25]  Irad Ben-Gal,et al.  Robust eco-design: A new application for air quality engineering , 2008 .

[26]  Michele Germani,et al.  Innovative software platform for eco-design of efficient electric motors , 2012 .

[27]  Vicky Lofthouse,et al.  Investigation into the role of core industrial designers in ecodesign projects , 2004 .

[28]  Xavier Gabarrell,et al.  Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign. , 2011, The Science of the total environment.

[29]  Cecília M.V.B. Almeida,et al.  Emergy as a tool for Ecodesign: evaluating materials selection for beverage packages in Brazil , 2010 .

[30]  B. Suárez-Peña,et al.  Una estrategia de ecodiseño de piezas obtenidas mediante moldeo a presión: análisis microestructural aplicado a la desmaterialización , 2009 .

[31]  Hing Kai Chan,et al.  A life-cycle assessment for eco-redesign of a consumer electronic product , 2011 .

[32]  Matthew Cook,et al.  Producer responsibility, waste minimisation and the WEEE Directive: case studies in eco-design from the European lighting sector. , 2006, The Science of the total environment.

[33]  Miriam Borchardt,et al.  Considerações sobre ecodesign: um estudo de caso na indústria eletrônica automotiva , 2008 .

[34]  Karthik Ramani,et al.  Integrated Sustainable Life Cycle Design: A Review , 2010 .

[35]  Xavier Gabarrell,et al.  Environmental assessment and improvement alternatives of a ventilated wooden wall from LCA and DfE perspective , 2012, The International Journal of Life Cycle Assessment.

[36]  R. Lamming,et al.  Supply management: is it a discipline? , 2006 .

[37]  R. C. Michelini,et al.  Product-service eco-design: Knowledge-based infrastructures , 2004 .

[38]  Marta Herva,et al.  Sustainable and safe design of footwear integrating ecological footprint and risk criteria. , 2011, Journal of hazardous materials.

[39]  Tracy Bhamra,et al.  Alternative function fulfilment: incorporating environmental considerations into increased design space , 2003 .

[40]  Peggy Zwolinski,et al.  Integrated design of remanufacturable products based on product profiles , 2006 .

[41]  Elisabeth Hochschorner,et al.  Handling trade-offs in Ecodesign tools for sustainable product development and procurement , 2006 .

[42]  Réjean Samson,et al.  A process-based approach to operationalize life cycle assessment through the development of an eco-design decision-support system , 2012 .

[43]  H. Ziya Ulukan,et al.  Green Product Design for Mobile Phones , 2009 .

[44]  Marina Apaydin,et al.  A Multi-Dimensional Framework of Organizational Innovation: A Systematic Review of the Literature , 2010 .

[45]  Hamza Cinar Eco-design and furniture : Environmental impacts of wood-based panels, surface and edge finishes , 2005 .

[46]  D. Maxwell,et al.  Developing sustainable products and services , 2003 .

[47]  Claudia De Giorgi,et al.  From ecodesign products guidelines to materials guidelines for a sustainable product. Qualitative and quantitative multicriteria environmental profile of a material , 2012 .

[48]  Armando Caldeira-Pires,et al.  Environmental benefits of substituting talc by sugarcane bagasse fibers as reinforcement in polypropylene composites: Ecodesign and LCA as strategy for automotive components , 2010 .

[49]  Daniel Collado-Ruiz,et al.  Influence of environmental information on creativity , 2010 .

[50]  Daniele Regazzoni,et al.  Eco-design with TRIZ laws of evolution , 2011 .

[51]  Xavier Gabarrell,et al.  Eco-innovation of a wooden childhood furniture set: an example of environmental solutions in the wood sector. , 2012, The Science of the total environment.

[52]  Rui-Yang Chen,et al.  RFM-based eco-efficiency analysis using Takagi–Sugeno fuzzy and AHP approach , 2009 .

[53]  Donghee Park,et al.  System optimization for eco-design by using monetization of environmental impacts: a strategy to convert bi-objective to single-objective problems , 2013 .

[54]  Mohammed A. Omar,et al.  Life cycle assessment-based selection for a sustainable lightweight body-in-white design , 2012 .

[55]  Kun-Mo Lee,et al.  Assessment of the ecodesign improvement options using the global warming and economic performance indicators , 2009 .

[56]  S. Zailani,et al.  Green supply chain initiatives among certified companies in Malaysia and environmental sustainability: Investigating the outcomes , 2011 .

[57]  Lennart Swanström,et al.  Sustainability management in product development projects : the ABB experience , 2006 .

[58]  Aldo Roberto Ometto,et al.  Ecodesign methods focused on remanufacturing , 2010 .

[59]  Manfred Drack,et al.  Treeplast Screw – a device for mounting various items to straw bale constructions , 2004 .

[60]  Vicente Chulvi,et al.  Usefulness of evolution lines in eco-design , 2011 .

[61]  Jessica Lagerstedt,et al.  EcoDesign and The Ten Golden Rules: generic advice for merging environmental aspects into product development , 2006 .

[62]  Srikanth Devanathan,et al.  Integration of Sustainability Into Early Design Through the Function Impact Matrix , 2010 .

[63]  A. Bernasconi,et al.  Analysis of the effect of mechanical recycling upon tensile strength of a short glass fibre reinforced polyamide 6,6 , 2007 .

[64]  Pinar Erol,et al.  ECO-design of reuse and recycling networks by multi-objective optimization , 2005 .

[65]  Conrad Luttropp,et al.  Education for sustainability as a transformative learning process: a pedagogical experiment in EcoDesign doctoral education , 2006 .

[66]  Bill Freedman,et al.  Principles and practice of ecological design , 2004 .

[67]  Michael Zwicky Hauschild,et al.  Implementing life cycle assessment in product development , 2003 .

[68]  Benita M. Beamon,et al.  Designing the green supply chain , 1999 .

[69]  Rosalind Malcolm Ecodesign Laws and the Environmental Impact of our Consumption of Products , 2011 .

[70]  Marie-France Vernier,et al.  Economic benefits tied to ecodesign , 2011 .

[71]  Luis Reis,et al.  Ecodesign of automotive components making use of natural jute fiber composites , 2010 .

[72]  S. Manahan Industrial Ecology: Environmental Chemistry and Hazardous Waste , 1999 .

[73]  Hing Kai Chan,et al.  Life cycle assessment of two personal electronic products—a note with respect to the energy-using product directive , 2009 .

[74]  Tomohiko Sakao,et al.  Quality engineering for early stage of environmentally conscious design , 2008 .

[75]  María D. Bovea,et al.  A taxonomy of ecodesign tools for integrating environmental requirements into the product design process , 2012 .

[76]  Glenn Johansson,et al.  Success factors for integration of ecodesign in product development , 2002 .

[77]  Lionel Roucoules,et al.  Toward proactive (eco)design process: modeling information transformations among designers activities , 2013 .

[78]  George J. Besseris,et al.  Eco‐design in total environmental quality management , 2012 .

[79]  Rob A. Zuidwijk,et al.  Strategic response to EEE returns: : Product eco-design or new recovery processes? , 2008, Eur. J. Oper. Res..

[80]  Wilson Kindlein,et al.  EcoDesign: case of a mini compressor re-design , 2008 .

[81]  Joseph Sarkis,et al.  Evaluating environmentally conscious business practices , 1998, Eur. J. Oper. Res..

[82]  Mathilde Drouineau,et al.  Eco-design stakes of electrical steel: Dynamic losses sensitivity , 2008 .

[83]  Glenn Johansson,et al.  Manufacturing, sustainability, ecodesign and risk : lessons learned from a study of Swedish and English companies , 2012 .

[84]  Gwenola Bertoluci,et al.  Integrating ecodesign by conducting changes in SMEs , 2006 .

[85]  Milad Avazbeigi,et al.  A material selection methodology and expert system for sustainable product design , 2011 .

[86]  Anna Lewandowska,et al.  ISO 14062 in theory and practice—ecodesign procedure. Part 1: structure and theory , 2010 .

[87]  Henrik Wenzel,et al.  Integration of environmental aspects in product development: a stepwise procedure based on quantitative life cycle assessment , 2002 .

[88]  Stefan Seuring,et al.  From a literature review to a conceptual framework for sustainable supply chain management , 2008 .

[89]  Kiyotaka Tahara,et al.  Quantifying producer and consumer-based eco-efficiencies for the identification of key ecodesign issues , 2008 .

[90]  N. Serres,et al.  Dry coatings and ecodesign part. 1 — Environmental performances and chemical properties , 2009 .

[91]  R. Roy Sustainable product-service systems , 2000 .

[92]  G. Ö. Sandström,et al.  Management of radical innovation and environmental challenges , 2008 .

[93]  Mariano Ramirez Sustainability in the education of industrial designers: the case for Australia , 2006 .

[94]  Fabrice Mathieux,et al.  Contributions to eco-design of machine-to-machine product service systems: the example of waste glass collection , 2011 .

[95]  Krystyna Czaplicka,et al.  Eco-design of non-metallic layer composites with respect to conveyor belts , 2003 .

[96]  Taeko Aoe,et al.  Eco-efficiency and ecodesign in electrical and electronic products , 2007 .

[97]  K.K.B. Hon,et al.  Structure and output mechanisms in Design for Environment (DfE) tools , 2012 .

[98]  Thomas A. Okrasinski,et al.  Eco-design implemented through a product-based environmental management system , 2006 .

[99]  Amy J. C. Trappey,et al.  An eco- and inno-product design system applying integrated and intelligent qfde and triz methodology , 2011 .

[100]  Michael Zwicky Hauschild,et al.  From Life Cycle Assessment to Sustainable Production: Status and Perspectives , 2005 .

[101]  Rosario Vidal,et al.  Materials selection for sustainable product design: a case study of wood based furniture eco-design , 2004 .

[102]  Ab Stevels,et al.  Combining eco-design and user benefits from human-powered energy systems, a win–win situation , 2006 .

[103]  Dennis M. Hussey,et al.  Linking Industrial Ecology with Business Strategy: Creating Value for Green Product Design , 2001 .

[104]  Davi Noboru Nakano,et al.  A produção científica nos anais do encontro nacional de engenharia de produção: um levantamento de métodos e tipos de pesquisa , 1999 .

[105]  Amadou Ndiaye,et al.  Meta-heuristic Methods Applied to the Design of Wood—Plastic Composites, with Some Attention to Environmental Aspects , 2009 .

[106]  Binshan Lin,et al.  Environmental practices and assessment: a process perspective , 2001, Ind. Manag. Data Syst..

[107]  G. Zsidisin,et al.  Environmental purchasing: a framework for theory development , 2001 .

[108]  Qinghua Zhu,et al.  Eco‐design planning in a Chinese telecommunication network company: Benchmarking its parent company , 2010 .

[109]  Jack R. Meredith,et al.  Theory Building through Conceptual Methods , 1993 .

[110]  Glenn Johansson Incorporating environmental concern in product development: A study of project characteristics , 2006 .

[111]  Qingyan Yang,et al.  A modular eco-design method for life cycle engineering based on redesign risk control , 2011 .

[112]  P. Hills,et al.  Extended producer responsibility and eco-design changes: perspectives from China , 2008 .

[113]  Casper Boks,et al.  Theory and practice of environmental benchmarking in a major consumer electronics company , 2003 .

[114]  Jahau Lewis Chen,et al.  The conflict-problem-solving CAD software integrating TRIZ into eco-innovation , 2004 .

[115]  Simon Clay,et al.  Sustainability Victoria: influencing resource use, towards zero waste and sustainable production and consumption , 2007 .

[116]  Tsai C. Kuo Enhancing disassembly and recycling planning using life-cycle analysis , 2006 .

[117]  Xavier Gabarrell,et al.  Eco-innovation of a wooden based modular social playground: application of LCA and DfE methodologies. , 2012 .

[118]  Xavier Gabarrell,et al.  Combined application of LCA and eco-design for the sustainable production of wood boxes for wine bottles storage , 2011 .

[119]  Casper Boks,et al.  The soft side of ecodesign , 2006 .

[120]  Rohit Verma,et al.  Empirical Research Published in Production and Operations Management (1992–2005): Trends and Future Research Directions , 2006 .

[121]  Conrad Luttropp,et al.  EcoDesign: what's happening? An overview of the subject area of EcoDesign and of the papers in this special issue , 2006 .

[122]  Hideki Kobayashi,et al.  Strategic evolution of eco-products: a product life cycle planning methodology , 2005 .

[123]  N. Serres,et al.  Dry coatings and ecodesign: Part. 2 — Tribological performances , 2009 .

[124]  Rodica Pamfilie,et al.  Managing Eco-Design Of Industrial Goods And Consumers’ Protection Nexus , 2010 .

[125]  Vicky Lofthouse,et al.  Ecodesign tools for designers: defining the requirements , 2006 .

[126]  Christoph Herrmann,et al.  Assessment of Ecodesign potential in reaching new recycling targets , 2010 .

[127]  William R. Sheate,et al.  Functional and systems aspects of the sustainable product and service development approach for industry , 2006 .

[128]  Joan Rieradevall,et al.  Using LCA to Assess Eco-design in the Automotive Sector: Case Study of a Polyolefinic Door Panel (12 pp) , 2006 .

[129]  Jacqueline Cramer,et al.  Barriers and stimuli for ecodesign in SMEs , 2002 .

[130]  Ali Vakili-Ardebili,et al.  Application of fuzzy techniques to develop an assessment framework for building design eco-drivers , 2007 .

[131]  Shin-ichi Sakai,et al.  Current results and future perspectives for Japanese recycling of home electrical appliances , 2008 .

[132]  Jahau Lewis Chen,et al.  Accelerating preliminary eco-innovation design for products that integrates case-based reasoning and TRIZ method , 2011 .

[133]  Fabrizio Passarini,et al.  Auto shredder residue LCA: implications of ASR composition evolution , 2012 .

[134]  Michael Zwicky Hauschild,et al.  EcoDesign and future environmental impacts , 2005 .

[135]  Hideki Kobayashi,et al.  A systematic approach to eco-innovative product design based on life cycle planning , 2006, Adv. Eng. Informatics.

[136]  An Vercalsteren Integrating the ecodesign concept in small and medium‐sized enterprises, Experiences in the Flemish region of Belgium , 2001 .

[137]  Alessandra Zamagni,et al.  Integrating services and tools in an ICT platform to support eco-innovation in SMEs , 2012, Clean Technologies and Environmental Policy.

[138]  Athakorn Kengpol,et al.  The decision support framework for developing Ecodesign at conceptual phase based upon ISO/TR 14062 , 2011 .

[139]  Jean-Pierre Belaud,et al.  Toward an eco-innovative method based on a better use of resources: application to chemical process preliminary design , 2012 .

[140]  María D. Bovea,et al.  The influence of impact assessment methods on materials selection for eco-design , 2006 .

[141]  Davide Russo,et al.  European testing of the efficiency of TRIZ in eco-innovation projects for manufacturing SMEs , 2010 .

[142]  K. Tan,et al.  The impact of external institutional drivers and internal strategy on environmental performance , 2012 .

[143]  Roberto Filippini,et al.  Operations management research: some reflections on evolution, models and empirical studies in OM , 1997 .