Chemical–mineralogical characterisation as useful tool in the assessment of the decay of the Mesola Castle (Ferrara, Italy)

Abstract The Mesola Castle and its Portico (16th century) rises on the right side branch of the River Po Delta in the eastern part of Ferrara province (Italy). Bricks, mortars and plasters from the Castle’s Portico were characterised by optical microscopy, X-ray fluorescence, X-ray diffraction and scanning electron microscopy/energy-dispersive X-ray spectrometers. This masonry is affected by efflorescence and sub-efflorescence, and mineralogical analysis, together with scanning electron microscopy observations, assisted to define the damaging products. Structures built in coastal environments are subject to sea weathering which cause substantial damages mainly due to the presence of salts. These could attack the building materials: (a) by penetrating from the ground through dampness; (b) carried by the wind in the form of salt spray; (c) due to occasional or recurrent flooding; (d) caused by the use of marine water during the preparation of mortar. For these reasons an integrated study approach involving chemical–mineralogical analysis and assessment of the environmental conditions is a useful tool to better define the causes of building materials deterioration.

[1]  A. Neville,et al.  PROPERTIES OF CONCRETE. 4TH AND FINAL EDITION , 1995 .

[2]  Maria Pia Riccardi,et al.  An approach to the dynamics of clay firing , 1999 .

[3]  R.P.J. van Hees,et al.  Experimental research on hygroscopic behaviour of porous specimens contaminated with salts , 2004 .

[4]  M. Riccardi,et al.  Firing process of natural clays. Some microtextures and related phase compositions , 1998 .

[5]  G. Bianchini,et al.  Chemical–mineralogical characterisation of clay sediments around Ferrara (Italy): a tool for an environmental analysis , 2002 .

[6]  Robert J. Flatt,et al.  Crystallization damage by sodium sulfate , 2003 .

[7]  I. Whitbread A proposal for the systematic description of thin sections towards the study of ancient ceramic technology , 1989 .

[8]  A. Neville Properties of Concrete , 1968 .

[9]  M. Raimondo,et al.  The influence of shaping and firing technology on ceramic properties of calcareous and non-calcareous illitic–chloritic clays , 2002 .

[10]  Carmela Vaccaro,et al.  CHEMICAL AND MINERALOGICAL CHARACTERISATION OF HISTORIC MORTARS IN FERRARA (NORTHEAST ITALY) , 2004 .

[11]  L. Pel,et al.  Salt transport and crystallization in porous building materials. , 2003, Magnetic resonance imaging.

[12]  Barbara Lubelli,et al.  Investigation on the behaviour of a restoration plaster applied on heavy salt loaded masonry , 2006 .

[13]  M. Stefani,et al.  The interplay of eustasy, climate and human activity in the late Quaternary depositional evolution and sedimentary architecture of the Po Delta system , 2005 .

[14]  I. Whitbread THE CHARACTERISATION OF ARGILLACEOUS INCLUSIONS IN CERAMIC THIN SECTIONS , 1986 .

[15]  Belinda Colston,et al.  Investigating the effects of humidity and salt crystallisation on medieval masonry , 2000 .

[16]  Barbara Lubelli,et al.  The role of sea salts in the occurrence of differrent damage mechanisms and decay patterns on brick masonry , 2004 .

[17]  Giuseppe Cultrone,et al.  Carbonate and silicate phase reactions during ceramic firing , 2001 .