Sound transmission loss analysis through a multilayer lightweight concrete hollow brick wall by FEM and experimental validation

This research work tries to find the most efficient numerical procedure to predict the transmission loss (TL) through a multilayer wall for frequencies ranging from 100 to 5000 Hz. The wall is made of lightweight concrete hollow bricks joined by mortar, with gypsum lining on both faces. This study is motivated by the need to develop new products with better acoustic properties of airborne sound insulation. In order to achieve this objective a set of tests using source and receiving chambers have been modelled according to the basic requirements of the UNE-EN ISO 140-1 standard rule. The constructive element is located between both chambers in order to evaluate its acoustic behaviour according to the UNE-EN ISO 717-1 standard rule. Applying the finite element method (FEM), a two-dimensional model with fluid-structure interaction has been built in the case of the horizontal and vertical planes, with the purpose of including the different eigenfrequencies of the rooms. The values of the average sound pressure in both test chambers have been calculated for different excitation sources: uni and omnidirectional waves. The convergence and accuracy of the proposed method are then assessed by comparing FEM results with experimental measurements carried out by a certified laboratory. Finally, the numerical procedure implemented in this work may be useful to evaluate the acoustic behaviour for other structural building elements and reduce the manufacturing time to develop new products in construction.

[1]  Catarina Thormark,et al.  A low energy building in a life cycle - its embodied energy, energy need for operation and recycling potential , 2002 .

[2]  K. Bathe.  Finite Element Procedures , 1995 .

[3]  C. F. Ng,et al.  Low frequency sound insulation using stiffness control with honeycomb panels , 2008 .

[4]  Erdogan Madenci,et al.  The Finite Element Method and Applications in Engineering Using ANSYS , 2007 .

[5]  P. J. García Nieto,et al.  Non-linear thermal optimization and design improvement of a new internal light concrete multi-holed brick walls by FEM , 2008 .

[6]  F. Castro,et al.  Cutoff wave numbers for energy-orthogonal eight-node quadrilateral plane-strain elements , 2006 .

[7]  Christos I. Papadopoulos.  Development of an optimised, standard- compliant procedure to calculate sound transmission loss: design of transmission rooms , 2002 .

[8]  Laurent Galbrun.  The prediction of airborne sound transmission between two rooms using first-order flanking paths , 2008 .

[9]  L. R. Scott,et al.  The Mathematical Theory of Finite Element Methods , 1994 .

[10]  Christos I. Papadopoulos,et al.  Redistribution of the low frequency acoustic modes of a room: a finite element-based optimisation method , 2001 .

[11]  Semyon G. Rabinovich,et al.  Measurement Errors and Uncertainties: Theory and Practice , 1999 .

[12]  O. C. Zienkiewicz,et al.  The Finite Element Method for Fluid Dynamics , 2005 .

[13]  Antonio Uris,et al.  On the sound insulation of masonry wall facades , 2008 .

[14]  P. Wriggers.  Nonlinear Finite Element Methods , 2008 .

[15]  P. J. García Nieto,et al.  Finite element analysis of thin-walled composite two-span wood-based loadbearing stressed skin roof panels and experimental validation , 2008 .

[16]  P. J. García Nieto,et al.  Acoustic Analysis of a Sandwich Non Metallic Panel for Roofs by FEM and Experimental Validation , 2008 .

[17]  L. Gagliardini,et al.  The use of a functional basis to calculate acoustic transmission between rooms , 1991 .

[18]  P. J. García Nieto,et al.  Nonlinear thermal optimization of external light concrete multi-holed brick walls by the finite element method , 2008 .

[19]  D. Blackstock.  Fundamentals of Physical Acoustics , 2000 .