Sintering behavior of ultra-thin 3D printed alumina lattice structures
暂无分享,去创建一个
[1] Xiaogang Hu,et al. Anisotropy in tensile properties and fracture behaviour of 316L stainless steel parts manufactured by fused deposition modelling and sintering , 2022, Advances in Manufacturing.
[2] Yi-zhou Zhou,et al. Controlling the anisotropy behaviour of 3D printed ceramic cores: From intralayer particle distribution to interlayer pore evolution , 2022, Additive Manufacturing.
[3] J. Greer,et al. Responsive materials architected in space and time , 2022, Nature Reviews Materials.
[4] K. Pochiraju,et al. Simulation of Shrinkage during Sintering of Additively Manufactured Silica Green Bodies , 2022, Additive Manufacturing.
[5] V. Ploshikhin,et al. Numerical simulation of shrinkage and deformation during sintering in metal binder jetting with experimental validation , 2022, Materials & Design.
[6] S. Marinel,et al. Estimate microstructure development from sintering shrinkage: a kinetic field approach , 2022, Materials Today Communications.
[7] E. Olevsky,et al. Sintering anisotropy of binder jetted 316L stainless steel: part I – sintering anisotropy , 2021, Powder Metallurgy.
[8] Thomas Schweizer,et al. Fused filament fabrication of stainless steel structures - from binder development to sintered properties , 2021, Additive Manufacturing.
[9] S. Marinel,et al. 3D printing of porcelain: finite element simulation of anisotropic sintering , 2021, The International Journal of Advanced Manufacturing Technology.
[10] T. Chartier,et al. Optimization of part orientation and adapted supports for manufacturing of ceramic parts by stereolithography using finite element simulations , 2021, Open Ceramics.
[11] M. C. Branciforti,et al. A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization , 2021 .
[12] N. Lecis,et al. Dimensional and geometrical precision of parts produced by binder jetting process as affected by the anisotropic shrinkage on sintering , 2021, Additive Manufacturing.
[13] S. Marinel,et al. Porous stage assessment of pressure assisted sintering modeling parameters: a ceramic identification method insensitive to final stage grain growth disturbance , 2021 .
[14] O. Sigmund,et al. Topology optimization of multi-scale structures: a review , 2021, Structural and Multidisciplinary Optimization.
[15] C. Tuck,et al. Additive manufacturing of advanced ceramic materials , 2021 .
[16] Han Zhou,et al. A review of topology optimization for additive manufacturing: Status and challenges , 2020 .
[17] Shaojun Liu,et al. Stereolithographical fabrication of dense Si3N4 ceramics by slurry optimization and pressure sintering , 2020 .
[18] S. Marinel,et al. Modeling sintering anisotropy in ceramic stereolithography of silica , 2020, Acta Materialia.
[19] C. Broeckhoven,et al. Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing , 2019, Additive Manufacturing.
[20] Li Yang,et al. 3D printing of ceramics: A review , 2019, Journal of the European Ceramic Society.
[21] Lu Song,et al. Dental ceramic prostheses by stereolithography-based additive manufacturing: potentials and challenges , 2019 .
[22] Michael Gschweitl,et al. Topology Optimization for Additive Manufacturing as an Enabler for Light Weight Flight Hardware , 2018, Designs.
[23] Xun Xu,et al. Support Structures for Additive Manufacturing: A Review , 2018, Journal of Manufacturing and Materials Processing.
[24] M. Meyers,et al. Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures , 2018, Advanced materials.
[25] Qifa Zhou,et al. Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures , 2018, Advanced materials.
[26] E. Olevsky,et al. Current understanding and future research directions at the onset of the next century of sintering science and technology , 2017 .
[27] W. Bauer,et al. Three-dimensional printing of transparent fused silica glass , 2017, Nature.
[28] Yonggang Huang,et al. Printing, folding and assembly methods for forming 3D mesostructures in advanced materials , 2017 .
[29] J. Lewis,et al. Printing soft matter in three dimensions , 2016, Nature.
[30] Xuan Song,et al. Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography , 2016 .
[31] M. Messner,et al. Dynamic Behavior of Engineered Lattice Materials , 2016, Scientific Reports.
[32] Feng Jin,et al. Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation , 2015 .
[33] Jean-Pierre Kruth,et al. Additive manufacturing of ceramics: A review , 2014 .
[34] Thierry Chartier,et al. Rapid Prototyping of Ceramics , 2013 .
[35] P. Greil,et al. Robocasting of Alumina Lattice Truss Structures , 2012 .
[36] John W. Halloran,et al. Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography , 2011 .
[37] D. Ryckelynck,et al. Anisotropic constitutive model and FE simulation of the sintering process of slip cast traditional porcelain , 2010 .
[38] Dominique Baillargeat,et al. Fabrication of Millimeter Wave Components Via Ceramic Stereo- and Microstereolithography Processes , 2008 .
[39] Veena Tikare,et al. Multi‐Scale Study of Sintering: A Review , 2006 .
[40] O. Guillon,et al. Anisotropic constitutive laws for sintering bodies , 2006 .
[41] D. Bouvard,et al. Anisotropy in Shrinkage During Sintering , 2006 .
[42] Eugene A. Olevsky,et al. Theory of sintering: from discrete to continuum , 1998 .
[43] J. Svoboda,et al. Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering—II. Diffusional densification and creep , 1994 .
[44] E. Olevsky,et al. Deformation aspects of anisotropic-porous bodies sintering , 1993 .