Manufacturing deformation impact on the performance of electrical generator for the wind turbine application

The system of systems approach is the representation of several distributed and independent systems, for a larger and complex system. The system can be defined as interacting and interdependent com...

[1]  Constantin D. Pitis,et al.  Novel method of benchmarking energetic efficiency of industrial systems , 2015, 2015 Annual IEEE Systems Conference (SysCon) Proceedings.

[2]  Olivier Barre,et al.  The Insulation for Machines Having a High Lifespan Expectancy, Design, Tests and Acceptance Criteria Issues , 2017 .

[3]  J. Kapat,et al.  IC6A1A6 vs. IC3A1 Squirrel Cage Induction Generator Cooling Configuration Challenges and Advantages for Wind Turbine Application , 2018, Volume 1.

[4]  Gopal Singh,et al.  Impact of Imbalanced Wind Turbine Generator Cooling on Reliability , 2019, 2019 10th International Renewable Energy Congress (IREC).

[5]  J.C.G. Wheeler,et al.  Effects of converter pulses on the electrical insulation in low and medium voltage motors , 2005, IEEE Electrical Insulation Magazine.

[6]  E. Gulski,et al.  Computer-aided recognition of discharge sources , 1992 .

[7]  W. McDermid.  Experience with accelerated aging and related diagnostic tests for stator coils and bars of rotating machines , 2014, 2014 ICHVE International Conference on High Voltage Engineering and Application.

[8]  Gopal Singh,et al.  System of Systems Strand Tilt Analysis Perspective on MediuMHigh Voltage Stator Bar and a Non-Destructive Testing Case Study , 2019, 2019 IEEE International Systems Conference (SysCon).

[9]  Tetsuo Tomiyama,et al.  Reliability of wind turbine technology through time , 2008 .

[10]  L. T. Rosenberg,et al.  A New Stator Coil Transposition for Large Machines , 1959, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[11]  Peter Tavner,et al.  Reliability of wind turbine subassemblies , 2009 .

[12]  K. Sundaram,et al.  A solution to reduce overheating and increase wind turbine systems availability , 2020 .

[13]  Aki Mikkola,et al.  Direct-drive permanent magnet generators for high-power wind turbines: benefits and limiting factors , 2012 .

[14]  F.T. Emery.  Partial discharge, dissipation factor, and corona aspects for high voltage electric generator stator bars and windings , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[15]  Peter Tavner,et al.  Wind turbine downtime and its importance for offshore deployment. , 2011 .

[16]  R. Nelson,et al.  Designing the cooling systems for the world's most powerful turbogenerator - Olkiluoto unit 3 , 2006, 2006 IEEE Power Engineering Society General Meeting.

[17]  B. J. Bennington,et al.  Transpositions in Turbogenerator Coil Sides Short Circuited at Each End , 1970 .

[18]  M. Fujita,et al.  Air-cooled large turbine generator with multiple-pitched ventilation ducts , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[19]  Ahmad Saleh,et al.  Addressing Reduced Ingress Protection Class & Proper Filter Selection for Open Ventilated (IC3A1) Wind Turbine Generator , 2019, 2019 10th International Renewable Energy Congress (IREC).

[20]  S. Lentijo,et al.  The Impact of the Converter on the Reliability of a Wind Turbine Generator , 2019, ASME 2019 Power Conference.

[21]  M. Runde,et al.  A Review of Results From Thermal Cycling Tests of Hydrogenerator Stator Windings , 2011, IEEE Transactions on Energy Conversion.

[22]  Weijun Yin,et al.  Failure mechanism of winding insulations in inverter-fed motors , 1997 .

[23]  Shuangxia Niu,et al.  Comparative Analysis of Bearing Current in Wind Turbine Generators , 2018 .

[24]  M. M. Botha.  Electrical machine failures, causes and cures , 1997 .

[25]  H. Rajabi Mashhadi,et al.  STATOR TURN-TO-TURN FAULT DETECTION OF SYNCHRONOUS GENERATOR USING TOTAL HARMONIC DISTORTION (THD) ANALYZING OF MAGNETIC FLUX LINKAGE , 2013 .

[26]  Henk Polinder,et al.  A Review of Methods to Increase the Availability of Wind Turbine Generator Systems , 2016 .