A Study on Corrosion and Corrosion-Wear Behavior of Fe-based Amorphous Alloy Coating Prepared by High Velocity Oxygen Fuel Method

[1]  Chun-Ying Lee,et al.  The study of mechanical properties and corrosion behavior of the Fe-based amorphous alloy coatings using high velocity oxygen fuel spraying , 2021 .

[2]  Chun-Ying Lee,et al.  Corrosion of high-velocity-oxygen-fuel (HVOF) sprayed non-crystalline alloy coating in marine environment , 2021 .

[3]  C. Kiminami,et al.  Challenges in optimizing the resistance to corrosion and wear of amorphous Fe-Cr-Nb-B alloy containing crystalline phases , 2020 .

[4]  Jiansong Zhou,et al.  Microstructure evolution and wear resistance of in-situ nanoparticles reinforcing Fe-based amorphous composite coatings , 2020 .

[5]  Guosheng Huang,et al.  Comparison of a cold‐sprayed and plasma‐sprayed Fe25Cr20Mo1Si amorphous alloy coatings on 40Cr substrates , 2020, Materials and Corrosion.

[6]  D. Xiong,et al.  Microstructure and corrosion resistance of Fe-based amorphous coating prepared by detonation spray , 2020 .

[7]  Yanrong Wu,et al.  The Corrosion Resistance Mechanism of Fe-Based Amorphous Coatings Synthesised by Detonation Gun Spraying , 2020, Journal of Materials Engineering and Performance.

[8]  T. Lee,et al.  Developing a new laser cladded FeCrMoCB metallic glass layer on nickel-free stainless-steel as a potential superior wear-resistant coating for joint replacement implants , 2020, Surface and Coatings Technology.

[9]  Wen-sheng Li,et al.  Dry sliding wear behaviors of Fe-based amorphous metallic coating synthesized by d-gun spray , 2020, Journal of Non-Crystalline Solids.

[10]  Weichao Wu,et al.  Microstructure, corrosion-resistance, and wear-resistance properties of subsonic flame sprayed amorphous Fe–Mo–Cr–Co coating with extremely high amorphous rate , 2020, Journal of Materials Research and Technology.

[11]  Jiang Ma,et al.  Characterization and elevated-temperature tribological performance of AC–HVAF-sprayed Fe-based amorphous coating , 2020 .

[12]  Ding-shun She,et al.  Effect of heat treatment on erosion–corrosion of Fe-based amorphous alloy coating under slurry impingement , 2020 .

[13]  K. Yao,et al.  Tailoring soft magnetic properties of Fe-based amorphous alloys through C addition , 2020 .

[14]  Yanchun Zhao,et al.  Corrosion and Wear Resistance of Fe-Based Amorphous Coatings , 2020 .

[15]  Yong Sun,et al.  Corrosive wear of multi-layer Fe-based coatings laser cladded from amorphous powders , 2019, Wear.

[16]  W. Shen,et al.  Effect of Mo content on glass forming ability and crystallization behavior of Fe-based alloy prepared by atmospheric plasma spraying , 2019, Results in Physics.

[17]  Ger Ming-Der,et al.  A study on the corrosion and wear behavior of nanocrystalline Ni Mo electrodeposited coatings , 2019, Surface and Coatings Technology.

[18]  X. Xiong,et al.  The wear properties and mechanism of detonation sprayed iron-based amorphous coating , 2019, Surface and Coatings Technology.

[19]  Ding-shun She,et al.  Corrosion Behavior of FeCrMoCBY Amorphous Coating Fabricated by High-Velocity Air Fuel Spraying , 2019, Journal of Thermal Spray Technology.

[20]  R. Yu,et al.  Chemical Synthesis of High-Stable Amorphous FeCo Nanoalloys with Good Magnetic Properties , 2018, Nanomaterials.

[21]  Min Liu,et al.  Microstructure and corrosion behavior of Fe-based amorphous coating prepared by HVOF , 2017 .

[22]  Hung-Bin Lee,et al.  A Study on the Corrosion and Wear Behavior of Electrodeposited Ni-W-P Coating , 2017, Metallurgical and Materials Transactions A.

[23]  S. Bai,et al.  Effects of laser re-melting and annealing on microstructure, mechanical property and corrosion resistance of Fe-based amorphous/crystalline composite coating , 2017 .

[24]  Qingjun Chen,et al.  Evaluating corrosion resistances of Fe-based amorphous alloys by Y Cr/Mo values , 2017 .

[25]  H. Ma,et al.  Fe-based amorphous coating with high corrosion and wear resistance , 2017 .

[26]  Suohui Zhang,et al.  Synergistic Effect of Mo, W, Mn and Cr on the Passivation Behavior of a Fe-Based Amorphous Alloy Coating , 2017, Acta Metallurgica Sinica (English Letters).

[27]  Wei Wang,et al.  Enhancement of oxidation and wear resistance of Fe-based amorphous coatings by surface modification of feedstock powders , 2015 .

[28]  Liping Huang,et al.  Effect of feedstock particle sizes on wear resistance of plasma sprayed Fe-based amorphous coatings , 2014 .

[29]  Ya-Zhe Xing,et al.  Wear Resistance and Bond Strength of Plasma Sprayed Fe/Mo Amorphous Coatings , 2014 .

[30]  J. C. Huang,et al.  Prominent Fe-based bulk amorphous steel alloy with large supercooled liquid region and superior corrosion resistance , 2014 .

[31]  C. Zhang,et al.  Corrosion and wear resistance of a Fe-based amorphous coating in underground environment , 2012 .

[32]  C. Tang,et al.  Wear behavior of HVOF-sprayed Fe-based amorphous coatings , 2012 .

[33]  W. Ke,et al.  Electrochemical behaviour of Fe-based metallic glasses in acidic and neutral solutions , 2012 .

[34]  Lin Liu,et al.  Effects of crystallization on the corrosion resistance of Fe-based amorphous coatings , 2012 .

[35]  S. Yi,et al.  The corrosion behaviors of Fe-based bulk metallic glasses in a sulfuric solution at 70 °C , 2010 .

[36]  Chao-Sung Lin,et al.  Wear and immersion corrosion of Ni–P electrodeposit in NaCl solution , 2010 .

[37]  C. Saw,et al.  Iron-Based Amorphous Metals: High-Performance Corrosion-Resistant Material Development , 2009 .

[38]  X. F. Zhang,et al.  Effects of Cr contents in Fe-based bulk metallic glasses on the glass forming ability and the corrosion resistance , 2009 .

[39]  I. Betancourt,et al.  Effect of B, Si and Cr on the mechanical properties of Fe-based amorphous metallic ribbons , 2005 .

[40]  K. Hashimoto.  2002 W.R. Whitney Award Lecture: In Pursuit of New Corrosion-Resistant Alloys , 2002 .

[41]  H. Kanno.  A simple derivation of the empirical rule TGTM = 23 , 1981 .

[42]  M. Cohen,et al.  Cathodic Behavior of Iron Single Crystals and the Oxides Fe3 O 4, Gamma ‐ Fe2 O 3, and Alpha ‐ Fe2 O 3 , 1961 .