Thermo-Mechanical Finite Element Model of Shell Behavior in the Continuous Casting of Steel

A coupled finite-element model, CON2D, has been developed to simulate temperature, stress, and shape development during the continuous casting of steel, both in and below the mold. The model simulates a transverse section of the strand in generalized plane strain as it moves down at the casting speed. It includes the effects of heat conduction, solidification, nonuniform superheat dissipation due to turbulent fluid flow, mutual dependence of the heat transfer and shrinkage on the size of the interfacial gap, the taper of the mold wall, and the thermal distortion of the mold. The stress model features an elastic-viscoplastic creep constitutive equation that accounts for the different responses of the liquid, semisolid, delta-ferrite, and austenite phases. Functions depending on temperature and composition are employed for properties such as thermal linear expansion. A contact algorithm is used to prevent penetration of the shell into the mold wall due to the internal liquid pressure. An efficient two-step algorithm is used to integrate these highly nonlinear equations. The model is validated with an analytical solution for both temperature and stress in a solidifying slab. It is applied to simulate continuous casting of a 120 mm billet and compares favorably with plant measurements of mold wall temperature, total heat removal, and shell thickness, including thinning of the corner. The model is ready to investigate issues in continuous casting such as mold taper optimization, minimum shell thickness to avoid breakouts, and maximum casting speed to avoid hot-tear crack formation due to submold bulging.

[1]  Metals Minerals,et al.  THERMEC'97 : International Conference on Thermomechanical Processing of Steels and Other Materials , 1997 .

[2]  J. O. Kristiansson,et al.  THERMAL STRESSES IN THE EARLY STAGE OF SOLIDIFICATION OF STEEL , 1982 .

[3]  P. J. Wray,et al.  Plastic deformation of delta-ferritic iron at intermediate strain rates , 1976 .

[4]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[5]  Brian G. Thomas,et al.  Analysis of the Potential Productivity of Continuous Cast Molds , 2000 .

[6]  I. V. Samarasekera,et al.  ANALYSIS OF THERMO-MECHANICAL BEHAVIOR IN BILLET CASTING , 2002 .

[7]  Stress analysis in solidification processes: Application to continuous casting , 1989 .

[8]  P. J. Wray,et al.  Effect of carbon content on the plastic flow of plain carbon steels at elevated temperatures , 1982 .

[9]  Sindo Kou,et al.  Modeling and control of casting and welding processes , 1986 .

[10]  Kyu Hwan Oh,et al.  A new criterion for internal crack formation in continuously cast steels , 2000 .

[11]  Hong Zhu,et al.  Coupled Thermal-Mechanical Fixed-Grid Finite-Element Model With Application to Initial Solidification , 1997 .

[12]  B. A. Boley,et al.  Elasto-plastic thermal stresses in a solidifying body , 1963 .

[13]  K. Sorimachi,et al.  Elastoplastic Stress Analysis of Bulging as a Major Cause of Internal Cracks in Continuously Cast Slabs , 1977 .

[14]  M. Flemings.  Solidification processing , 1974, Metallurgical and Materials Transactions B.

[15]  Jonathan A. Dantzig,et al.  Modeling in Materials Processing , 2001 .

[16]  J. M. Coulson,et al.  Heat Transfer , 2018, A Concise Manual of Engineering Thermodynamics.

[17]  Graeme Fairweather,et al.  Three level Galerkin methods for parabolic equations , 1974 .

[18]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[19]  Narsingh Deo,et al.  Graph Theory with Applications to Engineering and Computer Science , 1975, Networks.

[20]  Brian G. Thomas,et al.  Modeling superheat removal during continuous casting of steel slabs , 1992 .

[21]  A. Karimi,et al.  Master‟s thesis , 2011 .

[22]  Miss A.O. Penney.  (b) , 1974, The New Yale Book of Quotations.

[23]  Kinoshita Katsuo,et al.  Thermal Elasto-plastic Stress Analysis of Solidifying Shell in Continuous Casting Mold , 1979 .

[24]  Avijit Moitra.  Thermo-mechanical model of steel shell behavior in continuous slab casting , 1993 .

[25]  Brian G. Thomas,et al.  Maximum casting speed for continuous cast steel billets based on sub-mold bulging computation , 2002 .

[26]  C. Chow.  The effects of high speed casting on the mould heat transfer, billet solidification, and mould taper design of continuously cast steel billets , 2001 .

[27]  A. Ramacciotti.  Thermo-mechanical behaviour of the solidified shell in a “funnel-shaped” mold for continuous casting of thin slabs , 1988 .

[28]  Lallit Anand,et al.  An implicit time-integration procedure for a set of internal variable constitutive equations for isotropic elasto-viscoplasticity , 1989 .

[29]  B. Thomas,et al.  IDEAL TAPER PREDICTION FOR BILLET CASTING , 2003 .

[30]  Brian G. Thomas,et al.  Analysis of Thermal and Mechanical Behavior of Copper Molds during Continuous Casting of Steel Slabs , 1997 .

[31]  Brian G. Thomas,et al.  Simple constitutive equations for steel at high temperature , 1992 .

[32]  J. A. Dantzig,et al.  Initial development of thermal and stress fields in continuously cast steel billets , 1988 .

[33]  Brian G. Thomas,et al.  Mathematical modeling of the continuous slab casting mold: a state of the art review , 1991 .

[34]  Joong-Kil Park.  Thermo-mechanical phenomena in high speed continuous casting processes , 2002 .

[35]  Brian G. Thomas,et al.  Simple model of microsegregation during solidification of steels , 2001 .

[36]  山口 梅太郎,et al.  カナダ鉱山冶金学会 (Canadian Institute of Mining and Metallurgy) の憲章と定款 , 1966 .

[37]  Brian G. Thomas,et al.  Modeling of the continuous casting of steel—past, present, and future , 2002 .

[38]  J. O. Kristiansson.  THERMOMECHANICAL BEHAVIOR OF THE SOLIDIFYING SHELL WITHIN CONTINUOUS-CASTING BILLET MOLDS-A NUMERICAL APPROACH , 1984 .

[39]  Brian G. Thomas,et al.  SIMULATION OF THERMAL MECHANICAL BEHAVIOR DURING INITIAL SOLIDIFICATION , 1997 .

[40]  The Engineering Foundation , 1940, Nature.

[41]  B. Thomas,et al.  Ideal Taper Prediction for Slab Casting , 2003 .

[42]  J. Brimacombe.  Design of continuous casting machines based on a heat-flow analysis: state-of-the-art review , 1976 .

[43]  Alberto Cardona,et al.  Thermomechanical model of a continuous casting process , 2000 .