The nature of the vortical structures in the near wake of the Ahmed body

This study presents the results from high-spatial-resolution water-channel velocity-field measurements behind an Ahmed body with 25° rear slant angle. The Ahmed body represents a simplified generic model of a hatchback automobile that has been widely used to study near-wake flow dynamics. The results help clarify the unresolved question of whether the time-mean near-wake flow structure is topologically equivalent to a toroidal vortex or better described by a pair of horizontally aligned horseshoe vortices, with their legs pointing downstream. The velocimetry data presented allows the tracking of the vortical structures throughout the near wake through a set of orthogonal planes, as well as the measurement of their circulation. The spanwise vortices that form as the flow separates from the top and bottom rear edges are shown to tilt downstream at the sides of the body, while no evidence is found of a time-mean attached toroidal vortex, at least for the Reynolds number (based on the square root of the frontal area) of R e FA ~ 30 , 000 under consideration.

[1]  Martin A. Passmore,et al.  Influence of short rear end tapers on the wake of a simplified square-back vehicle: wake topology and rear drag , 2016 .

[2]  D. Ricot,et al.  Fluid force and symmetry breaking modes of a 3D bluff body with a base cavity , 2016 .

[3]  J. Venning Vortex Structures in the Wakes of Two- and Three-Dimensional Bodies , 2016 .

[4]  S. To,et al.  Unsteady flow structures around a high-drag Ahmed body , 2015, Journal of Fluid Mechanics.

[5]  H. Blackburn,et al.  Mutual inductance of two helical vortices , 2015, Journal of Fluid Mechanics.

[6]  M. Thompson,et al.  The effect of aspect ratio on the wake of the Ahmed body , 2015 .

[7]  H. Blackburn,et al.  The interaction of helical tip and root vortices in a wind turbine wake , 2013 .

[8]  Yan Zhou,et al.  Turbulent near wake of an Ahmed vehicle model , 2013 .

[9]  Azeddine Kourta,et al.  Characterization of synthetic jet actuation with application to Ahmed body wake , 2013 .

[10]  O. Cadot,et al.  Turbulent wake past a three-dimensional blunt body. Part 1. Global modes and bi-stability , 2013, Journal of Fluid Mechanics.

[11]  Jean-Luc Aider,et al.  Drag reduction on the 25° slant angle Ahmed reference body using pulsed jets , 2012 .

[12]  Azeddine Kourta,et al.  Analysis and control of the near-wake flow over a square-back geometry , 2009 .

[13]  Jean-François Beaudoin,et al.  Drag and lift reduction of a 3D bluff body using flaps , 2008 .

[14]  Andreas Fouras,et al.  Target-free Stereo PIV: a novel technique with inherent error estimation and improved accuracy , 2008 .

[15]  Sinisa Krajnovic,et al.  Flow Around a Simplified Car, Part 2: Understanding the Flow , 2005 .

[16]  D. Allano,et al.  Cavitation as a complementary tool for automotive aerodynamics , 2004 .

[17]  J. D'Elía,et al.  CFD modeling of the flow around the Ahmed vehicle model , 2004 .

[18]  L. Graftieaux,et al.  Combining PIV, POD and vortex identification algorithms for the study of unsteady turbulent swirling flows , 2001 .

[19]  Gunther Ramm,et al.  Some salient features of the time - averaged ground vehicle wake , 1984 .