Effects of silicon addition on the microstructure and properties of B4C–SiC composite prepared with polycarbosilane-coated B4C powder

[1]  Hao Wang,et al.  Microstructure and properties of B4C-SiC composites prepared by polycarbosilane-coating/B4C powder route , 2014 .

[2]  P. Šajgalík,et al.  Microstructure and mechanical properties of hot pressed Al2O3/SiC nanocomposites , 2013 .

[3]  A. Domínguez-Rodríguez,et al.  Toughening of super-hard ultra-fine grained B4C densified by spark-plasma sintering via SiC addition , 2013 .

[4]  Changxia Liu,et al.  Erosion behaviour of B4C-based ceramic composites , 2010 .

[5]  Moshe P. Dariel,et al.  Microstructural evolution during the infiltration of boron carbide with molten silicon , 2010 .

[6]  Xiaolei Shi,et al.  Mechanical properties of Al2O3–SiC–C composites using polycarbosilane as SiC precursor , 2010 .

[7]  A. K. Suri,et al.  Synthesis and consolidation of boron carbide: a review , 2010 .

[8]  G. Hilmas,et al.  Enhanced densification and mechanical properties of ZrB2–SiC processed by a preceramic polymer coating route , 2008 .

[9]  G. Hilmas,et al.  Pressureless sintering of carbon-coated zirconium diboride powders , 2007 .

[10]  Yaogang Li,et al.  Hot pressed ZrB2–SiC–C ultra high temperature ceramics with polycarbosilane as a precursor , 2007 .

[11]  N. Frage,et al.  The morphology of ceramic phases in BxC–SiC–Si infiltrated composites , 2006 .

[12]  H. Baharvandi,et al.  Investigation on addition of ZrO2-3 mol% Y2O3 powder on sintering behavior and mechanical properties of B4C , 2006 .

[13]  Hyoun‐Ee Kim,et al.  Densification and Mechanical Properties of B4C with Al2O3 as a Sintering Aid , 2004 .

[14]  G. I. Kalandadze,et al.  Sintering of Boron and Boron Carbide , 2000 .

[15]  G. Messing,et al.  Processing and Microstructure Development in Alumina–Silicon Carbide Intragranular Particulate Composites , 1994 .

[16]  T. Page,et al.  Microstructural evolution in reaction-bonded silicon carbide , 1986 .

[17]  Guo‐Jun Zhang,et al.  Effect of additives introduced by ball milling on sintering behavior and mechanical properties of hot-pressed B4C ceramics , 2010 .

[18]  R. Riedel,et al.  Al2O3-SiC composites prepared by warm pressing and sintering of an organosilicon polymer-coated alumina powder , 2007 .

[19]  F. Thévenot,et al.  Boron carbide ― a comprehensive review , 1990 .

[20]  R. Pampuch,et al.  Mechanism of reactions in the Sil + Cf system and the self-propagating high-temperature synthesis of silicon carbide , 1987 .