Numerical Methods in Fracture Mechanics

After a short introduction sketching the continuum mechanics description, the basic equations of Fracture Mechanics will be evaluated with particular emphasis on the numerical treatment.

[1]  Leslie Banks-Sills,et al.  Reappraisal of the quarter-point quadrilateral element in linear elastic fracture mechanics , 1984 .

[2]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[3]  D. Parks.  The virtual crack extension method for nonlinear material behavior , 1977 .

[4]  I. N. Sneddon.  The distribution of stress in the neighbourhood of a crack in an elastic solid , 1946, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[5]  D. M. Tracey.  Finite elements for three-dimensional elastic crack analysis , 1974 .

[6]  Dietmar Gross,et al.  Einige Erhaltungssätze der Kontinuumsmechanik vom J-Integral-Typ , 1981 .

[7]  J. F. Kalthoff,et al.  Measurements of dynamic stress intensity factors for fast running and arresting cracks in double-cantilever-beam specimens , 1977 .

[8]  A. Bakker.  The J-Concept: Theoretical Basis And its Use in EPFM , 1985 .

[9]  D. M. Parks.  A stiffness derivative finite element technique for determination of crack tip stress intensity factors , 1974 .

[10]  Edward L. Wilson,et al.  Numerical methods in finite element analysis , 1976 .

[11]  G. P. Cherepanov.  Crack propagation in continuous media , 1967 .

[12]  J. Z. Zhu,et al.  The finite element method , 1977 .

[13]  E. Keim,et al.  Linear elastic analysis of semi-elliptical axial surface cracks in a hollow cylinder , 1979 .

[14]  L. H. Larsson.  A calculational round robin in elastic-plastic fracture mechanics , 1983 .

[15]  John W. Hutchinson,et al.  Singular behaviour at the end of a tensile crack in a hardening material , 1968 .

[16]  E. M. Morozov,et al.  Elastic-plastic fracture mechanics , 1978 .

[17]  J. D. Eshelby,et al.  The force on an elastic singularity , 1951, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[18]  Three-dimensional finite element simulation of post-yield fracture experiments , 1986 .

[19]  J. D. Eshelby.  The Calculation of Energy Release Rates , 1974 .

[20]  H. G. Delorenzi.  Energy release rate calculations by the finite element method , 1985 .

[21]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[22]  R. D. Henshell,et al.  CRACK TIP FINITE ELEMENTS ARE UNNECESSARY , 1975 .

[23]  J. Rice,et al.  Plane strain deformation near a crack tip in a power-law hardening material , 1967 .

[24]  R. Barsoum.  Triangular quarter‐point elements as elastic and perfectly‐plastic crack tip elements , 1977 .