Effect of Al/Ti ratio on the microstructure, texture and incipient plasticity of (CoNiCr0.5)95Al Ti high entropy alloys

[1]  Liyuan Liu,et al.  The effect of Al/Ti ratio on the evolution of precipitates and their effects on mechanical properties for Ni35(CoCrFe)55AlxTi10−x high entropy alloys , 2022, Journal of Alloys and Compounds.

[2]  Fei Chen,et al.  Interstitial concentration effects on incipient plasticity and dislocation behaviors of face-centered cubic FeNiCr multicomponent alloys based on nanoindentation , 2021, Journal of Materials Science & Technology.

[3]  N. Tsuji,et al.  Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy , 2021, Materials Science and Engineering: A.

[4]  K. An,et al.  Gradient cell–structured high-entropy alloy with exceptional strength and ductility , 2021, Science.

[5]  H. Kim,et al.  The high temperature mechanical properties and the correlated microstructure/ texture evolutions of a TWIP high entropy alloy , 2021, 2105.04597.

[6]  Dingshun Yan,et al.  Interstitial effects on the incipient plasticity and dislocation behavior of a metastable high-entropy alloy: Nanoindentation experiments and statistical modeling , 2021 .

[7]  D. Xiong,et al.  Enhanced strain hardening by bimodal grain structure in carbon nanotube reinforced Al–Mg composites , 2021 .

[8]  U. Ramamurty,et al.  Bimodality of incipient plastic strength in face-centered cubic high-entropy alloys , 2021 .

[9]  G. Duscher,et al.  Effect of interstitial oxygen and nitrogen on incipient plasticity of NbTiZrHf high-entropy alloys , 2020 .

[10]  Ge Wu,et al.  Nanostructural metallic materials: Structures and mechanical properties , 2020, Materials Today.

[11]  L. Gu,et al.  Tuning element distribution, structure and properties by composition in high-entropy alloys , 2019, Nature.

[12]  H. Fu,et al.  Effects of cooling rate on microstructure, mechanical properties, and residual stress of Fe-2.1B (wt%) alloy , 2019, Materials Science and Engineering: A.

[13]  Jian Xu,et al.  Incipient plasticity and activation volume of dislocation nucleation for TiZrNbTaMo high-entropy alloys characterized by nanoindentation , 2019, Journal of Materials Science & Technology.

[14]  H. Arora,et al.  High Tensile Ductility and Strength in Dual-phase Bimodal Steel through Stationary Friction Stir Processing , 2019, Scientific Reports.

[15]  D. Raabe,et al.  Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy , 2019, Acta Materialia.

[16]  Ran Wei,et al.  A superior combination of strength-ductility in CoCrFeNiMn high-entropy alloy induced by asymmetric rolling and subsequent annealing treatment , 2018, Materials Characterization.

[17]  T. Maity,et al.  Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics , 2018, International Journal of Plasticity.

[18]  W. Kim,et al.  Microstructures and mechanical properties of the non-equiatomic FeMnNiCoCr high entropy alloy processed by differential speed rolling , 2018, Materials Science and Engineering: A.

[19]  Jian Xu,et al.  (TiZrNbTa)-Mo high-entropy alloys: Dependence of microstructure and mechanical properties on Mo concentration and modeling of solid solution strengthening , 2018 .

[20]  E. Tabachnikova,et al.  Mechanical Properties and Thermally Activated Plasticity of the Ti30Zr25Hf15Nb20Ta10 High Entropy Alloy at Temperatures 4.2–350 K , 2018 .

[21]  Hyoung-Seop Kim,et al.  High-temperature tensile deformation behavior of hot rolled CrMnFeCoNi high-entropy alloy , 2018 .

[22]  C. Haase,et al.  Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys , 2017, 1712.01627.

[23]  William A. Curtin,et al.  New Theory for Mode I Crack-tip Dislocation Emission , 2017 .

[24]  B. Liu,et al.  Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys , 2017 .

[25]  T. Nieh,et al.  Dislocation nucleation during nanoindentation in a body-centered cubic TiZrHfNb high-entropy alloy , 2017 .

[26]  D. G. Morris,et al.  Plasticity analysis by synchrotron radiation in a Mg97Y2Zn1 alloy with bimodal grain structure and containing LPSO phase , 2015 .

[27]  Qingfeng Zeng,et al.  Phase stability, chemical bonding and mechanical properties of titanium nitrides: a first-principles study. , 2014, Physical chemistry chemical physics : PCCP.

[28]  T. Nieh,et al.  Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy , 2013 .

[29]  A. Wilkinson,et al.  Measurement of geometrically necessary dislocation density with high resolution electron backscatter diffraction: effects of detector binning and step size. , 2013, Ultramicroscopy.

[30]  A. Barnoush.  Correlation between dislocation density and nanomechanical response during nanoindentation , 2012 .

[31]  C. Schuh,et al.  Effect of solid solution elements on nanoindentation hardness, rate dependence, and incipient plasticity in fine grained magnesium alloys , 2011 .

[32]  Yanfei Gao,et al.  Determining the activation energies and slip systems for dislocation nucleation in body-centered cubic Mo and face-centered cubic Ni single crystals , 2011 .

[33]  Yimin Gao,et al.  The electronic, mechanical properties and theoretical hardness of chromium carbides by first-principles calculations , 2011 .

[34]  C. Packard,et al.  Nanoscale strength distribution in amorphous versus crystalline metals , 2010 .

[35]  D. Raabe,et al.  Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography , 2009 .

[36]  A. Minor,et al.  A new view of the onset of plasticity during the nanoindentation of aluminium , 2006, Nature materials.

[37]  C. Schuh.  Nanoindentation studies of materials , 2006 .

[38]  A. Wilkinson,et al.  High-resolution elastic strain measurement from electron backscatter diffraction patterns: new levels of sensitivity. , 2006, Ultramicroscopy.

[39]  C. Schuh,et al.  Determining the activation energy and volume for the onset of plasticity during nanoindentation , 2006 .

[40]  C. Schuh,et al.  Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments , 2005, Nature materials.

[41]  T. Nieh,et al.  Rate Dependence of Serrated Flow During Nanoindentation of a Bulk Metallic Glass , 2002 .

[42]  P. Uranga,et al.  Static recrystallization behaviour of a wide range of austenite grain sizes in microalloyed steels , 2000 .