The influence of the oxidation degree of poly(3-hexylthiophene) on the photocatalytic activity of poly(3-hexylthiophene)/TiO2 composites

Abstract The oxidation of conjugated polymer on the surface of conjugated polymer/TiO 2 composites is inevitable during the photocatalytic reaction. So it is necessary to research the influence of the degree of oxidation of conjugated polymer on the photocatalytic activity of conjugated polymer/TiO 2 composites. Poly(3-hexylthiophene) (P3HT) with different oxidation degree was prepared. P3HT/TiO 2 composites were synthesized with oxidized P3HT. P3HT and P3HT/TiO 2 composites were characterized by FTIR, gel permeation chromatography (GPC), XPS and UV–vis diffuse reflectance spectra. FTIR, GPC and XPS results showed that the P3HT was oxidized to different degree. UV–vis diffuse reflectance spectra indicated that these composites are responsible to visible light. Photocatalytic activity of the P3HT/TiO 2 composites was examined by degrading methyl orange solution under visible light irradiation. According to the apparent rate constants of photocatalytic reaction, moderate oxidation degree of P3HT is beneficial for the photocatalytic activity of P3HT/TiO 2 composites, while the excessive oxidation of P3HT would decrease the photocatalytic activity of P3HT/TiO 2 composites.

[1]  M. Fernández-García,et al.  W,N-Codoped TiO2-Anatase: A Sunlight-Operated Catalyst for Efficient and Selective Aromatic Hydrocarbons Photo-Oxidation , 2009 .

[2]  S. Martin,et al.  Environmental Applications of Semiconductor Photocatalysis , 1995 .

[3]  Jincai Zhao,et al.  Dramatic visible photocatalytic degradation performances due to synergetic effect of TiO2 with PANI. , 2008, Environmental science & technology.

[4]  Hyunwoong Park,et al.  Combinatorial doping of TiO_2 with platinum (Pt), chromium (Cr), vanadium (V), and nickel (Ni) to achieve enhanced photocatalytic activity with visible light irradiation , 2010 .

[5]  J. Yates,et al.  TiO2-based Photocatalysis: Surface Defects, Oxygen and Charge Transfer , 2005 .

[6]  D. Chatterjee,et al.  Visible light induced photodegradation of organic pollutants on dye adsorbed TiO2 surface , 2002 .

[7]  O. González Díaz,et al.  TiO2-photocatalysis as a tertiary treatment of naturally treated wastewater , 2002 .

[8]  Liejin Guo,et al.  A novel method for the preparation of a highly stable and active CdS photocatalyst with a special surface nanostructure. , 2006, The journal of physical chemistry. B.

[9]  Xinyong Li,et al.  Fabrication of Cu2O/TiO2 nanotube heterojunction arrays and investigation of its photoelectrochemical behavior , 2009 .

[10]  Marta I. Litter,et al.  Heterogeneous photocatalysis: Transition metal ions in photocatalytic systems , 1999 .

[11]  Liyuan Li,et al.  Photocatalytic nitrate reduction over Pt–Cu/TiO2 catalysts with benzene as hole scavenger , 2010 .

[12]  Lirong Zheng,et al.  Ag/ZnO heterostructure nanocrystals: synthesis, characterization, and photocatalysis. , 2007, Inorganic chemistry.

[13]  M. Fernández-García,et al.  Doping level effect on sunlight-driven W,N-co-doped TiO2-anatase photo-catalysts for aromatic hydrocarbon partial oxidation , 2010 .

[14]  G. Palmisano,et al.  Photodegradation of pharmaceutical drugs in aqueous TiO2 suspensions: Mechanism and kinetics , 2007 .

[15]  Yunfeng Zhu,et al.  Photocatalytic degradation of methyl orange using polythiophene/titanium dioxide composites , 2010 .

[16]  F. Peng,et al.  Preparation of Visible-light Response Nano-sized ZnO Film and Its Photocatalytic Degradation to Methyl Orange , 2005 .

[17]  A. Reller,et al.  Photoinduced reactivity of titanium dioxide , 2004 .

[18]  F. Krebs,et al.  Oxygen Release and Exchange in Niobium Oxide MEHPPV Hybrid Solar Cells , 2006 .

[19]  E. Stathatos,et al.  Study of the Efficiency of Visible-Light Photocatalytic Degradation of Basic Blue Adsorbed on Pure and Doped Mesoporous Titania Films , 2001 .

[20]  Y. Duan,et al.  Characterization and photocatalytic activity of poly(3-hexylthiophene)-modified TiO2 for degradation of methyl orange under visible light. , 2009, Journal of hazardous materials.

[21]  S. Holdcroft,et al.  Mechanisms of photodegradation of poly(3-alkylthiophenes) in solution , 1993 .

[22]  T. Hjertberg,et al.  Oxidative Degradation of Poly(3-octylthiophene) , 1995 .

[23]  Lihua Zhu,et al.  Hybrid composites of conductive polyaniline and nanocrystalline titanium oxide prepared via self-assembling and graft polymerization , 2006 .

[24]  A. Manivannan,et al.  Origin of photocatalytic activity of nitrogen-doped TiO2 nanobelts. , 2009, Journal of the American Chemical Society.

[25]  Long Jiang,et al.  Visible Light Induced Photocatalytic Degradation of Methyl Orange by Polythiophene/TiO2 Composite Particles , 2010 .

[26]  Shuo Chen,et al.  Photonic crystal coupled TiO(2)/polymer hybrid for efficient photocatalysis under visible light irradiation. , 2010, Environmental science & technology.

[27]  Joaquim L. Faria,et al.  Ce-doped TiO2 for photocatalytic degradation of chlorophenol , 2009 .

[28]  F. Krebs,et al.  Hybrid solar cells based on MEH-PPV and thin film semiconductor oxides (TiO2, Nb2O5, ZnO, CeO2 and CeO2–TiO2): Performance improvement during long-time irradiation , 2006 .

[29]  Andrew J. Medford,et al.  The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics , 2010 .

[30]  B. Vercelli,et al.  Polythiophene‐ and Polypyrrole‐based Mono‐ and Multilayers , 2008 .

[31]  Yue Liu,et al.  Enhancement of the visible light photocatalytic performance of C-doped TiO2 by loading with V2O5 , 2009 .

[32]  Yunfeng Zhu,et al.  Photocatalytic activity of poly(3-hexylthiophene)/titanium dioxide composites for degrading methyl orange , 2010 .

[33]  A. Facchetti,et al.  Semiconducting Polymeric Materials , 2008 .

[34]  Hai-chao Liang,et al.  Visible-induced photocatalytic reactivity of polymer-sensitized titania nanotube films , 2009 .

[35]  Jinlong Zhang,et al.  Photocatalytic performance of a visible light TiO2 photocatalyst prepared by a surface chemical modification process , 2009 .

[36]  J. Yates,et al.  Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results , 1995 .

[37]  M. Catellani,et al.  Photodegradation and photostabilization studies of poly(3-butylthiophene) in the solid state , 1997 .

[38]  Long Jiang,et al.  Synthesis and characterization of polythiophene/titanium dioxide composites , 2008 .