Understanding the electrical response and sensing mechanism of carbon-nanotube-based gas sensors

Gas sensors based on carbon nanotube field effect transistors (CNFETs) have outstanding sensitivity compared to existing technologies. However, the lack of understanding of the sensing mechanism has greatly hindered progress on calibration standards and customization of these nano-sensors. Calibration requires identifying fundamental transistor parameters and establishing how they vary in the presence of a gas. This work focuses on modeling the electrical response of CNTFETs in the presence of oxidizing (NO2) and reducing (NH3) gases and determining how the transistor characteristics are affected by gas-induced changes of contact properties, such as the Schottky barrier height and width, and by the doping level of the nanotube. From the theoretical fits of the experimental transfer characteristics at different concentrations of NO2 and NH3, we find that the CNTFET response can be modeled by introducing changes in the Schottky barrier height. These changes are directly related to the changes in the metal work function of the electrodes that we determine experimentally, independently, with a Kelvin probe. Our analysis yields a direct correlation between the ON – current and the changes in the electrode metal work function. Doping due to molecules adsorbed at the carbon-nanotube/metal interface also affects the transfer characteristics.

[1]  Jerry Tersoff,et al.  Novel Length Scales in Nanotube Devices , 1999 .

[2]  Philip Kim,et al.  Structure and Electronic Properties of Carbon Nanotubes , 2000 .

[3]  W. Sachtler,et al.  Photoelectric determination of the equilibrium of thin Pd films (80–120 Å) , 1974 .

[4]  Chongwu Zhou,et al.  Band engineering of carbon nanotube field-effect transistors via selected area chemical gating , 2005 .

[5]  A. Goldoni,et al.  The Role of Metal Contact in the Sensitivity of Single-Walled Carbon Nanotubes to NO2 , 2007 .

[6]  Ji-Beom Yoo,et al.  Highly sensitive NO2 gas sensor based on ozone treated graphene , 2012 .

[7]  G. Fedorov,et al.  The search for superconductivity at van Hove singularities in carbon nanotubes , 2012 .

[8]  T. Paronyan,et al.  Enhanced gas sensing in pristine carbon nanotubes under continuous ultraviolet light illumination , 2012, Scientific Reports.

[9]  J. Borghetti,et al.  Carbon nanotube transistor optimization by chemical control of the nanotube–metal interface , 2004 .

[10]  Christofer Hierold,et al.  Sub-ppm NO2 detection by Al2O3 contact passivated carbon nanotube field effect transistors , 2009 .

[11]  Louis E. Brus,et al.  Controlling Energy-Level Alignments at Carbon Nanotube/Au Contacts , 2003 .

[12]  M. Shiraishi,et al.  Work function of carbon nanotubes , 2001 .

[13]  Christofer Hierold,et al.  Ultra-low power operation of self-heated, suspended carbon nanotube gas sensors , 2013 .

[14]  M. Fontana,et al.  Electron-hole transport and photovoltaic effect in gated MoS2 Schottky junctions , 2012, Scientific Reports.

[15]  Jian Zhang,et al.  Mechanism of NO2 detection in carbon nanotube field effect transistor chemical sensors , 2006 .

[16]  K. Natori,et al.  Characteristics of a carbon nanotube field-effect transistor analyzed as a ballistic nanowire field-effect transistor , 2005 .

[17]  Philip G. Collins,et al.  Hydrogen sensing and sensitivity of palladium-decorated single-walled carbon nanotubes with defects. , 2010, Nano letters.

[18]  Richard Martel,et al.  The Role of the Oxygen/Water Redox Couple in Suppressing Electron Conduction in Field‐Effect Transistors , 2009 .

[19]  Nicola Marzari,et al.  Sensing mechanisms for carbon nanotube based NH3 gas detection. , 2009, Nano letters.

[20]  Douglas R. Kauffman,et al.  Chemically induced potential barriers at the carbon nanotube-metal nanoparticle interface. , 2007, Nano letters.

[21]  D. Jimenez,et al.  A simple drain current model for Schottky-barrier carbon nanotube field effect transistors , 2007 .

[22]  Wei Chen,et al.  Novel C-rich carbon nitride for room temperature NO2 gas sensors , 2014 .

[23]  D. Pribat,et al.  Carbon nanotubes based transistors as gas sensors: State of the art and critical review , 2009 .

[24]  Richard Martel,et al.  Controlling doping and carrier injection in carbon nanotube transistors , 2002 .

[25]  Toshishige Yamada.  Modeling of carbon nanotube Schottky barrier modulation under oxidizing conditions , 2004 .

[26]  E. Snow,et al.  Role of defects in single-walled carbon nanotube chemical sensors. , 2006, Nano letters.

[27]  Toshishige Yamada,et al.  Equivalent circuit model for carbon nanotube Schottky barrier: Influence of neutral polarized gas molecules , 2006 .

[28]  Amin Salehi-Khojin,et al.  On the sensing mechanism in carbon nanotube chemiresistors. , 2011, ACS nano.

[29]  John W. Mintmire,et al.  Universal Density of States for Carbon Nanotubes , 1998 .

[30]  Katsuhiko Ariga,et al.  Layer-by-layer films of graphene and ionic liquids for highly selective gas sensing. , 2010, Angewandte Chemie.

[31]  Kong,et al.  Nanotube molecular wires as chemical sensors , 2000, Science.

[32]  Annick Loiseau,et al.  Thickness dependent sensing mechanism in sorted semi-conducting single walled nanotube based sensors. , 2012, The Analyst.

[33]  B. Koel,et al.  Adsorption of nitrogen dioxide on polycrystalline gold , 1990 .

[34]  T. Vogt,et al.  NO2 detection by adsorption induced work function changes in In2O3 thin films , 2007 .

[35]  Supriyo Datta,et al.  Metal–insulator–semiconductor electrostatics of carbon nanotubes , 2002 .

[36]  Alexander Star,et al.  Short-channel effects in contact-passivated nanotube chemical sensors , 2003 .

[37]  Makarand Paranjape,et al.  Gas sensing mechanism of carbon nanotubes: From single tubes to high-density networks , 2014 .