Exergy analysis and optimization of charging–discharging processes of latent heat thermal energy storage system with three phase change materials

Abstract In this paper, a mathematical model for the overall exergy efficiency of combined charging–discharging processes of three phase change materials (PCMs) named PCM1, PCM2, PCM3 and different heat transfer fluid (HTF, the solar field HTF and thermal energy storage (TES) system HTF are different) has been developed. The model takes into consideration the effects of inlet temperatures and the number of heat transfer units (NTUs) of the solar field HTF and the TES system HTF on the maximum overall exergy efficiency and the optimum melting temperatures of PCM1, PCM2 and PCM3. The analysis is based on a lumped model for the PCMs which assumes that a PCM is a thermal reservoir with a constant temperature of its melting point and a distributed model for the solar field HTF and the TES system HTF which assume that their temperatures vary in their flow path. The results show that the maximum overall exergy efficiency can be improved by increasing the NTUs of either the solar field HTF or the TES system HTF which is not more than 5. It is found that, for the TES system HTF, increasing its inlet temperature can increase the maximum overall exergy efficiency, however, for the solar field HTF, only when the NTUs of the solar field HTF and the TES system HTF are both more than 2, increasing its inlet temperature can increase the maximum overall exergy efficiency. It is also found that, compared to increasing the NTUs of the TES system HTF, increasing the NTUs of the solar field HTF is more efficient in improving the maximum overall exergy efficiency. Considering actual application of solar thermal power, we suggest that inlet temperature ranges of the solar field HTF and the TES system HTF should be 800–1200 K and 350–400 K, respectively, and the ranges of the NTUs of PCM1, PCM2 and PCM3 should be 4–5, correspond to the ranges of T m1.opt , T m2.opt and T m3.opt are 750–850 K, 550–600 K, 450–500 K, respectively. The present analysis provides theoretical guidance for application of three PCMs storage system for solar thermal power.

[1]  F. Bruno,et al.  Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems , 2012 .

[2]  David R. Mills,et al.  Screening of high melting point phase change materials (PCM) in solar thermal concentrating technology based on CLFR , 2005 .

[3]  Tarik Kousksou,et al.  Exergy based performance evaluation of latent heat thermal storage system: A review , 2010 .

[4]  M. Kenisarin.  High-temperature phase change materials for thermal energy storage , 2010 .

[5]  Takayuki Watanabe,et al.  Second law optimization of a latent heat storage system with PCMS having different melting points , 1995 .

[6]  Wei Wang,et al.  Numerical analysis and parameters optimization of shell-and-tube heat storage unit using three phase change materials , 2013 .

[7]  R. Velraj,et al.  Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources , 2007 .

[8]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .

[9]  Tarik Kousksou,et al.  Second law analysis of latent thermal storage for solar system , 2007 .

[10]  Luisa F. Cabeza,et al.  State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization , 2010 .

[11]  S. D. Pohekar,et al.  Performance enhancement in latent heat thermal storage system: A review , 2009 .

[12]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[13]  Yvan Dutil,et al.  A review on phase-change materials: Mathematical modeling and simulations , 2011 .

[14]  Yaşar Demirel,et al.  Thermoeconomics of seasonal latent heat storage system , 2006 .

[15]  Ming Fang,et al.  Effects of different multiple PCMs on the performance of a latent thermal energy storage system , 2007 .

[16]  Josep Illa,et al.  Exergetic optimization of solar collector and thermal energy storage system , 2006 .

[17]  R. Seeniraj,et al.  Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs , 2008 .

[18]  A. Mujumdar,et al.  Thermodynamic optimization of the thermal process in energy storage using multiple phase change materials , 1997 .

[19]  Yaşar Demirel.  HEAT STORAGE BY PHASE CHANGING MATERIALS AND THERMOECONOMICS , 2007 .

[20]  Zhifeng Wang,et al.  Exergy analysis of two phase change materials storage system for solar thermal power with finite-time thermodynamics , 2012 .

[21]  Luisa F. Cabeza,et al.  State of the art on high-temperature thermal energy storage for power generation. Part 2--Case studies , 2010 .

[22]  Sunil Kumar Singal,et al.  Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material , 2008 .

[23]  Y. Varol,et al.  Energy and exergy analysis of a latent heat storage system with phase change material for a solar collector , 2008 .

[24]  Hamid Ait Adine,et al.  Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materials , 2009 .

[25]  Roman Domański,et al.  Exergy analysis for the evaluation of a thermal storage system employing PCMS with different melting temperatures , 1996 .

[26]  G. Jilani,et al.  Numerical analysis of latent heat thermal energy storage system , 2007 .

[27]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[28]  S. C. Solanki,et al.  Heat transfer characteristics of thermal energy storage system using PCM capsules: A review , 2008 .