Simulation of the First Millimeters of the Diesel Spray by an Eulerian Spray Atomization Model Applied on ECN Spray A Injector

[1]  Raul Payri,et al.  ENGINE COMBUSTION NETWORK: COMPARISON OF SPRAY DEVELOPMENT, VAPORIZATION, AND COMBUSTION IN DIFFERENT COMBUSTION VESSELS , 2012 .

[2]  Caroline L. Genzale,et al.  Comparison of Diesel Spray Combustion in Different High-Temperature, High-Pressure Facilities , 2010 .

[3]  Raul Payri,et al.  Flow regime effects on non-cavitating injection nozzles over spray behavior , 2011 .

[4]  Raul Payri,et al.  Engine combustion network (ECN): characterization and comparison of boundary conditions for different combustion vessels , 2012 .

[5]  Raul Payri,et al.  The effect of temperature and pressure on thermodynamic properties of diesel and biodiesel fuels , 2011 .

[6]  Olivier Simonin,et al.  Numerical Simulation of Cavitating Flows in Diesel Injectors by a Homogeneous Equilibrium Modeling Approach , 2001 .

[7]  Michael Fairweather,et al.  Assessment of Σ−Yliq model predictions for air-assisted atomisation , 2007 .

[8]  Christopher F. Powell,et al.  TIME-RESOLVED X-RAY RADIOGRAPHY OF SPRAYS FROM ENGINE COMBUSTION NETWORK SPRAY A DIESEL INJECTORS , 2014 .

[9]  Nathaniel Trask,et al.  Compressible Modeling of the Internal Two-Phase Flow in a Gas-Centered Swirl Coaxial Fuel Injector , 2012 .

[10]  Raul Payri,et al.  Flow regime effects over non-cavitating diesel injection nozzles , 2012 .

[11]  F. X. Demoulin,et al.  A new model for turbulent flows with large density fluctuations : application to liquid atomization , 2007 .

[12]  Raul Payri,et al.  A contribution to the understanding of isothermal diesel spray dynamics , 2007 .

[13]  J. M. Pastor,et al.  Application and Evaluation of the Eulerian-Lagrangian Spray Atomization (ELSA) Model on CFD Diesel Spray Simulations , 2011 .

[14]  Talgat S. Khasanshin,et al.  Thermodynamic Properties of Heavy n-Alkanes in the Liquid State: n-Dodecane , 2003 .

[15]  F. J. Salvador,et al.  Estimation of a suitable Schmidt number range in diesel sprays at high injection pressure , 2011 .

[16]  Max Kaiser,et al.  Near Nozzle High-Speed Measurements of the Intact Core for Diesel Spray , 2012 .

[17]  G. Faeth,et al.  Structure and breakup properties of sprays , 1995 .

[18]  A. Burluka,et al.  DEVELOPMENT OF A EULERIAN MODEL FOR THE “ATOMIZATION” OF A LIQUID JET , 2001 .

[19]  F. J. Salvador,et al.  STUDY OF THE INFLUENCE OF THE NEEDLE LIFT ON THE INTERNAL FLOW AND CAVITATION PHENOMENON IN DIESEL INJECTOR NOZZLES BY CFD USING RANS METHODS , 2013 .

[20]  Christopher F. Powell,et al.  ENGINE COMBUSTION NETWORK (ECN): MEASUREMENTS OF NOZZLE GEOMETRY AND HYDRAULIC BEHAVIOR , 2012 .

[21]  Bernardo Tormos,et al.  Large Eddy Simulation for high pressure flows: Model extension for compressible liquids , 2011, Math. Comput. Model..

[22]  Raul Payri,et al.  The potential of Large Eddy Simulation (LES) code for the modeling of flow in diesel injectors , 2010, Math. Comput. Model..