Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure

[1]  M. Winter,et al.  Large-scale automotive battery cell manufacturing: Analyzing strategic and operational effects on manufacturing costs , 2021 .

[2]  F. Duffner,et al.  Battery cost modeling: A review and directions for future research , 2020 .

[3]  A. Manthiram,et al.  Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries , 2020, Advanced Energy Materials.

[4]  L. Wan,et al.  Solid-solution based metal alloy phase for highly reversible lithium metal anode. , 2020, Journal of the American Chemical Society.

[5]  I. Han,et al.  High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes , 2020 .

[6]  Ellen Ivers-Tiffée,et al.  Benchmarking the performance of all-solid-state lithium batteries , 2020 .

[7]  Florian J. Günter,et al.  Influence of the Cell Format on the Electrolyte Filling Process of Lithium‐Ion Cells , 2020, Energy Technology.

[8]  Christoph Herrmann,et al.  Toward Data‐Driven Applications in Lithium‐Ion Battery Cell Manufacturing , 2020, Energy Technology.

[9]  G. Reinhart,et al.  Solid versus Liquid—A Bottom‐Up Calculation Model to Analyze the Manufacturing Cost of Future High‐Energy Batteries , 2020, Energy Technology.

[10]  W. Hawley,et al.  Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing , 2019, Journal of Energy Storage.

[11]  Christian Masquelier,et al.  Fundamentals of inorganic solid-state electrolytes for batteries , 2019, Nature Materials.

[12]  G. Reinhart,et al.  Prospects of production technologies and manufacturing costs of oxide-based all-solid-state lithium batteries , 2019, Energy & Environmental Science.

[13]  P. Mukherjee,et al.  Drying Temperature and Capillarity-Driven Crack Formation in Aqueous Processing of Li-Ion Battery Electrodes , 2019, ACS Applied Energy Materials.

[14]  Florian J. Günter,et al.  Influence of the Electrolyte Quantity on Lithium-Ion Cells , 2019, Journal of The Electrochemical Society.

[15]  Joon-Hee Kim,et al.  A 1000 Wh kg−1 Li–Air battery: Cell design and performance , 2019, Journal of Power Sources.

[16]  Hong Li,et al.  In situ formation of a bifunctional interlayer enabled by a conversion reaction to initiatively prevent lithium dendrites in a garnet solid electrolyte , 2019, Energy & Environmental Science.

[17]  J. Zhao,et al.  Research on vacuum drying process and internal heat conduction of Li-ion battery core , 2019, Theoretical and Applied Mechanics Letters.

[18]  Joon-Hee Kim,et al.  High-Energy-Density Li-O2 Battery at Cell Scale with Folded Cell Structure , 2019, Joule.

[19]  Martin Winter,et al.  Theoretical versus Practical Energy: A Plea for More Transparency in the Energy Calculation of Different Rechargeable Battery Systems , 2018, Advanced Energy Materials.

[20]  M. Winter,et al.  Before Li Ion Batteries. , 2018, Chemical reviews.

[21]  Chunsheng Wang,et al.  Architectural design and fabrication approaches for solid-state batteries , 2018, MRS Bulletin.

[22]  Marissa Wood,et al.  Balancing formation time and electrochemical performance of high energy lithium-ion batteries , 2018, Journal of Power Sources.

[23]  Kazunori Takada,et al.  Progress in solid electrolytes toward realizing solid-state lithium batteries , 2018, Journal of Power Sources.

[24]  Wolfgang Haselrieder,et al.  Current status and challenges for automotive battery production technologies , 2018 .

[25]  M. Winter,et al.  Performance and cost of materials for lithium-based rechargeable automotive batteries , 2018 .

[26]  Jun Lu,et al.  Batteries and fuel cells for emerging electric vehicle markets , 2018 .

[27]  Gunther Reinhart,et al.  All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production , 2018 .

[28]  Xuan Hu,et al.  A lithium–oxygen battery with a long cycle life in an air-like atmosphere , 2018, Nature.

[29]  S. Passerini,et al.  A cost and resource analysis of sodium-ion batteries , 2018 .

[30]  Prasant Kumar Nayak,et al.  From Lithium-Ion to Sodium-Ion Batteries: Advantages, Challenges, and Surprises. , 2018, Angewandte Chemie.

[31]  Wolfgang Haselrieder,et al.  Characterization of the calendering process for compaction of electrodes for lithium-ion batteries , 2017 .

[32]  R. Moos,et al.  Thick-films of garnet-type lithium ion conductor prepared by the Aerosol Deposition Method: The role of morphology and annealing treatment on the ionic conductivity , 2017 .

[33]  D. Andre,et al.  Future high-energy density anode materials from an automotive application perspective , 2017 .

[34]  Biyi Xu,et al.  Reaction mechanisms of lithium garnet pellets in ambient air: The effect of humidity and CO2 , 2017 .

[35]  T. Chen,et al.  Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries , 2017 .

[36]  Martin Winter,et al.  Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density , 2017, Journal of Solid State Electrochemistry.

[37]  Yet-Ming Chiang,et al.  Compliant Yet Brittle Mechanical Behavior of Li2S–P2S5 Lithium‐Ion‐Conducting Solid Electrolyte , 2017 .

[38]  Zhijia Du,et al.  Fast formation cycling for lithium ion batteries , 2017 .

[39]  Arumugam Manthiram,et al.  Lithium battery chemistries enabled by solid-state electrolytes , 2017 .

[40]  P. Scharfer,et al.  Development of a three-stage drying profile based on characteristic drying stages for lithium-ion battery anodes , 2017 .

[41]  Peter Lamp,et al.  Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives , 2017 .

[42]  A. Schilling,et al.  Analyzing Bending Stresses on Lithium‐Ion Battery Cathodes induced by the Assembly Process , 2016 .

[43]  Jianming Zheng,et al.  Anode‐Free Rechargeable Lithium Metal Batteries , 2016 .

[44]  Yu Zhang,et al.  A Flexible and Wearable Lithium–Oxygen Battery with Record Energy Density achieved by the Interlaced Architecture inspired by Bamboo Slips , 2016, Advanced materials.

[45]  Q. Ma,et al.  About the Compatibility between High Voltage Spinel Cathode Materials and Solid Oxide Electrolytes as a Function of Temperature. , 2016, ACS applied materials & interfaces.

[46]  Paul A. Nelson,et al.  Study of a dry room in a battery manufacturing plant using a process model , 2016 .

[47]  Linda F. Nazar,et al.  Advances in understanding mechanisms underpinning lithium–air batteries , 2016, Nature Energy.

[48]  Linda F. Nazar,et al.  Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes , 2016, Nature Energy.

[49]  Jürgen Janek,et al.  A solid future for battery development , 2016, Nature Energy.

[50]  Hongkyung Lee,et al.  Structural modulation of lithium metal-electrolyte interface with three-dimensional metallic interlayer for high-performance lithium metal batteries , 2016, Scientific Reports.

[51]  Debasish Mohanty,et al.  The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling , 2016 .

[52]  P. Scharfer,et al.  Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings , 2016, Journal of Coatings Technology and Research.

[53]  Doron Aurbach,et al.  Promise and reality of post-lithium-ion batteries with high energy densities , 2016 .

[54]  Satoshi Hori,et al.  High-power all-solid-state batteries using sulfide superionic conductors , 2016, Nature Energy.

[55]  H. Pan,et al.  Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries , 2016, Scientific Reports.

[56]  K. Friedrich,et al.  Novel solvent-free direct coating process for battery electrodes and their electrochemical performance , 2016 .

[57]  Peter Lamp,et al.  Inorganic Solid-State Electrolytes for Lithium Batteries: Mechanisms and Properties Governing Ion Conduction. , 2015, Chemical reviews.

[58]  Rui Zhang,et al.  A Review of Solid Electrolyte Interphases on Lithium Metal Anode , 2015, Advanced science.

[59]  Wolfgang Haselrieder,et al.  Discontinuous and Continuous Processing of Low-Solvent Battery Slurries for Lithium Nickel Cobalt Manganese Oxide Electrodes , 2015, Journal of Electronic Materials.

[60]  Jens Tübke,et al.  Lithium–Sulfur Cells: The Gap between the State‐of‐the‐Art and the Requirements for High Energy Battery Cells , 2015 .

[61]  D. Wilkinson,et al.  A review of cathode materials and structures for rechargeable lithium–air batteries , 2015 .

[62]  Chih‐Long Tsai,et al.  High conductivity of mixed phase Al-substituted Li7La3Zr2O12 , 2015, Journal of Electroceramics.

[63]  Young Jin Nam,et al.  Issues and Challenges for Bulk‐Type All‐Solid‐State Rechargeable Lithium Batteries using Sulfide Solid Electrolytes , 2015 .

[64]  Philipp Adelhelm,et al.  From lithium to sodium: cell chemistry of room temperature sodium–air and sodium–sulfur batteries , 2015, Beilstein journal of nanotechnology.

[65]  Martin Winter,et al.  Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode. , 2015, Physical chemistry chemical physics : PCCP.

[66]  Claus Daniel,et al.  Prospects for reducing the processing cost of lithium ion batteries , 2015 .

[67]  Ozan Toprakci,et al.  A review of recent developments in membrane separators for rechargeable lithium-ion batteries , 2014 .

[68]  Kevin G. Gallagher,et al.  Quantifying the promise of lithium–air batteries for electric vehicles , 2014 .

[69]  K. Tadanaga,et al.  Liquid-phase synthesis of a Li3PS4 solid electrolyte using N-methylformamide for all-solid-state lithium batteries , 2014 .

[70]  G. Sahu,et al.  Air-stable, high-conduction solid electrolytes of arsenic-substituted Li4SnS4 , 2014 .

[71]  Ming Jia,et al.  A comparative study of different binders and their effects on electrochemical properties of LiMn 2 O 4 cathode in lithium ion batteries , 2014 .

[72]  Candace K. Chan,et al.  Origami lithium-ion batteries , 2014, Nature Communications.

[73]  Li Lu,et al.  Li-rich Thin Film Cathode Prepared by Pulsed Laser Deposition , 2013, Scientific Reports.

[74]  D. Bethune,et al.  Limitations in Rechargeability of Li-O2 Batteries and Possible Origins. , 2012, The journal of physical chemistry letters.

[75]  N. Dudney,et al.  Fabrication and characterization of Li–Mn–Ni–O sputtered thin film high voltage cathodes for Li-ion batteries , 2012 .

[76]  Yutao Li,et al.  Optimizing Li+ conductivity in a garnet framework , 2012 .

[77]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[78]  Xiangwu Zhang,et al.  Lithiumoxygen batteriesLimiting factors that affect performance , 2011 .

[79]  A. Hayashi,et al.  Structural change of Li2S-P2S5 sulfide solid electrolytes in the atmosphere , 2011 .

[80]  T. Yoshida,et al.  Compatibility of Li7La3Zr2O12 Solid Electrolyte to All-Solid-State Battery Using Li Metal Anode , 2010 .

[81]  P. Novák,et al.  A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries , 2010 .

[82]  Fuminori Mizuno,et al.  Rechargeable Li-Air Batteries with Carbonate-Based Liquid Electrolytes , 2010 .

[83]  K. Tatsumi,et al.  Preparation and performances of highly porous layered LiCoO2 films for lithium batteries , 2007 .

[84]  Shengbo Zhang.  A review on the separators of liquid electrolyte Li-ion batteries , 2007 .

[85]  L. E. Scriven,et al.  Low-flow limit in slot coating of dilute solutions of high molecular weight polymer , 2004 .

[86]  Haroon S. Kheshgi,et al.  Low-flow limit in slot coating: Theory and experiments , 2000 .

[87]  Adrian G. Bailey,et al.  The science and technology of electrostatic powder spraying, transport and coating , 1998 .

[88]  Ralph E. White,et al.  Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries , 1998 .

[89]  C. Marsh,et al.  Development and experimental results of continuous coating technology for lithium-ion electrodes , 1998, Thirteenth Annual Battery Conference on Applications and Advances. Proceedings of the Conference.

[90]  Emanuel Peled,et al.  The Electrochemical Behavior of Alkali and Alkaline Earth Metals in Nonaqueous Battery Systems—The Solid Electrolyte Interphase Model , 1979 .

[91]  O. Guillon,et al.  Ceramics for electrochemical storage , 2020 .

[92]  Advanced Ceramics for Energy Conversion and Storage , 2020 .

[93]  George Serafeim,et al.  Review and Directions for Future Research , 2020 .

[94]  G. Blomgren.  The development and future of lithium ion batteries , 2017 .

[95]  Apurba Sakti,et al.  A techno-economic analysis and optimization of Li-ion batteries for light-duty passenger vehicle electrification , 2015 .

[96]  Avicenne Energy,et al.  The Rechargeable Battery Market And Main Trends 2011 2020 , 2015 .

[97]  Yuzuru Sato,et al.  Electrowinning of Lithium from LiOH in Molten Chloride , 2014 .

[98]  Jürgen Fleischer,et al.  Integrated cut and place module for high productive manufacturing of lithium-ion cells , 2014 .

[99]  Wayne W. Cai,et al.  Joining Technologies for Automotive Lithium-Ion Battery Manufacturing: A Review , 2010 .

[100]  Michele Maggiore,et al.  Theory and experiments , 2008 .

[101]  P. Cousot.  Achievements and Perspectives , 2000 .

[102]  Robert C. Wolpert,et al.  A Review of the , 1985 .