Friction-stir welding of a ductile high entropy alloy: microstructural evolution and weld strength

Abstract High entropy alloys (HEAs) are a novel subset of metallic systems with complex compositions usually yielding simple phase formation. To verify their potential engineering applications, a novel Co16Fe28Ni28Cr28 HEA with a low content of expensive Co was developed and its welding characteristics through friction-stir welding (FSW) were investigated. The HEA shows a stable face-centered-cubic (FCC) structure with an excellent ductility of about 70%. The microstructural evolution during FSW was dominated by discontinuous recrystallization through grain bulging and the B/ B ¯ {112} shear texture formed in the stir zone (SZ). A white band (WB) containing W-rich and Cr-rich phases was detected in the SZ. The WB exhibited refined grains compared with the normal SZ, which may be associated with the particle-stimulated nucleation (PSN). The present understanding of the microstructural evolution during FSW of HEAs may help tailor the weld properties to pave the way for their engineering applications.

[1]  M. Ahmed,et al.  Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys , 2016 .

[2]  T. DebRoy,et al.  Current Issues and Problems in Welding Science , 1992, Science.

[3]  Jun Wei,et al.  Friction stir welding of a CoCrFeNiAl0.3 high entropy alloy , 2017 .

[4]  T. Nieh,et al.  Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system , 2014 .

[5]  Douglas L. Irving,et al.  A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures , 2015 .

[6]  P. Skubisz,et al.  Forgeability of Mg–Al–Zn magnesium alloys in hot and warm closed die forging , 2006 .

[7]  P. Liaw,et al.  Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy , 2015, Nature Communications.

[8]  D. Raabe,et al.  Particle Stimulated Nucleation in Coarse-Grained Ferritic Stainless Steel , 2012, Metallurgical and Materials Transactions A.

[9]  P. Dawson,et al.  Modeling strain hardening and texture evolution in friction stir welding of stainless steel , 2005 .

[10]  Sheng Guo,et al.  Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range , 2017 .

[11]  J. C. Huang,et al.  Relationship between grain size and Zener¿Holloman parameter during friction stir processing in AZ31 Mg alloys , 2004 .

[12]  R. Fonda,et al.  Development of grain structure during friction stir welding , 2004 .

[13]  F. J. Humphreys.  The nucleation of recrystallization at second phase particles in deformed aluminium , 1977 .

[14]  Huijun Kang,et al.  A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys , 2014, Scientific Reports.

[15]  Dierk Raabe,et al.  A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility , 2014 .

[16]  H. Kokawa,et al.  Structural response of superaustenitic stainless steel to friction stir welding , 2011 .

[17]  C. Tasan,et al.  Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off , 2016, Nature.

[18]  Zhili Feng,et al.  Influence of thermo-mechanical parameters on texture and tensile behavior of friction stir processed Mg alloy , 2010 .

[19]  A. Vairis,et al.  On the extrusion stage of linear friction welding of Ti 6Al 4V , 1999 .

[20]  N. Tsuji,et al.  Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing , 2017 .

[21]  R. Ritchie,et al.  A fracture-resistant high-entropy alloy for cryogenic applications , 2014, Science.

[22]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[23]  Yong Zhang,et al.  A hexagonal close-packed high-entropy alloy: The effect of entropy , 2016 .

[24]  F. Liu,et al.  In-situ grain structure and texture evolution during friction stir welding of austenite stainless steel , 2017 .

[25]  T. Shun,et al.  Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .

[26]  B. Cantor,et al.  Microstructural development in equiatomic multicomponent alloys , 2004 .

[27]  Xiaoxu Huang,et al.  Revealing the Maximum Strength in Nanotwinned Copper , 2009, Science.

[28]  C. Shek,et al.  Compositional dependence of phase formation and mechanical properties in three CoCrFeNi-(Mn/Al/Cu) high entropy alloys , 2016 .

[29]  J. Robson,et al.  Particle effects on recrystallization in magnesium―manganese alloys: Particle―stimulated nucleation , 2009 .

[30]  T. Nieh,et al.  An assessment on the future development of high-entropy alloys: Summary from a recent workshop , 2015 .

[31]  Jian Lu,et al.  High-entropy alloy: challenges and prospects , 2016 .

[32]  Guijun Bi,et al.  Friction stir welding of dissimilar materials between AA6061 and AA7075 Al alloys effects of process parameters , 2014 .

[33]  Jien-Wei Yeh,et al.  Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys , 2012 .

[34]  K. Dahmen,et al.  Microstructures and properties of high-entropy alloys , 2014 .

[35]  H. Kokawa,et al.  Development of grain structure during friction-stir welding of Cu–30Zn brass , 2014 .

[36]  B. Li,et al.  The study on defects in aluminum 2219-T6 thick butt friction stir welds with the application of multiple non-destructive testing methods , 2011 .

[37]  D. Miracle,et al.  A critical review of high entropy alloys and related concepts , 2016 .

[38]  Yong Zhang,et al.  Prediction of high-entropy stabilized solid-solution in multi-component alloys , 2012 .

[39]  K. Song,et al.  Effect of welding speed on microstructural and mechanical properties of friction stir welded Inconel 600 , 2009 .

[40]  Yufeng Sun,et al.  Investigation of welding parameter dependent microstructure and mechanical properties in friction stir welded pure Ti joints , 2010 .

[41]  Zhili Feng,et al.  Weldability of a high entropy CrMnFeCoNi alloy , 2016 .

[42]  K. An,et al.  A precipitation-hardened high-entropy alloy with outstanding tensile properties , 2016 .

[43]  J. C. Huang,et al.  Grain-boundary strengthening in nanocrystalline chromium and the Hall–Petch coefficient of body-centered cubic metals , 2013 .

[44]  John F. Bingert,et al.  Texture variations in an aluminum friction stir weld , 2007 .

[45]  H. Bhadeshia,et al.  Recent advances in friction-stir welding : Process, weldment structure and properties , 2008 .

[46]  Yufeng Sun,et al.  The effect of SiC particles on the microstructure and mechanical properties of friction stir welded pure copper joints , 2011 .

[47]  S. L. Semiatin,et al.  Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys , 2000 .

[48]  C. Muralidharan,et al.  Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints , 2011 .

[49]  T. G. Nieh,et al.  Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy , 2013 .

[50]  C. D. Lundin,et al.  Fatigue behavior of a wrought Al 0.5 CoCrCuFeNi two-phase high-entropy alloy , 2015 .

[51]  R. Scattergood,et al.  Tensile properties of low-stacking fault energy high-entropy alloys , 2015 .

[52]  N. Hansen,et al.  High angle boundaries formed by grain subdivision mechanisms , 1997 .

[53]  Tongmin Wang,et al.  A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties , 2016 .

[54]  H. Kokawa,et al.  Development of grain structure during friction stir welding of pure titanium , 2009 .

[55]  Mark A.M. Bourke,et al.  Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear , 2005 .

[56]  George M. Pharr,et al.  Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys , 2014 .