Ambient Drying Route to Aramid Nanofiber Aerogels with High Mechanical Properties for Low-k Dielectrics

[1]  Fei Liu,et al.  Cross-Linked and Rigid Polyimide Composite Foams with Prominent Fire Resistant, Thermal Insulating, and Wave-Transparent Properties , 2022, ACS Applied Polymer Materials.

[2]  T. Qiu,et al.  The Aramid-Coating-on-Aramid Strategy toward Strong, Tough, and Foldable Polymer Aerogel Films. , 2022, ACS nano.

[3]  Guangming Tao,et al.  Robust and Flexible Multimaterial Aerogel Fabric Toward Outdoor Passive Heating , 2022, Advanced Fiber Materials.

[4]  Z. Jia,et al.  Preparation of 4-methyl-1-pentene membranes via non-solvent induced phase separation (NIPS) , 2022, European Polymer Journal.

[5]  Qinghua Zhang,et al.  Controllable Strong and Ultralight Aramid Nanofiber-Based Aerogel Fibers for Thermal Insulation Applications , 2022, Advanced Fiber Materials.

[6]  Xiaodong Wang,et al.  Synthesis of porous polyimide films with low dielectric constant and excellent mechanical properties by ambient pressure drying , 2022, Journal of Materials Science.

[7]  Qamar Wali,et al.  Polyimide Aerogel Fibers with Controllable Porous Microstructure for Super-Thermal Insulation Under Extreme Environments , 2022, Advanced Fiber Materials.

[8]  Xianlin Xu,et al.  Proton Donor-Regulated Mechanically Robust Aramid Nanofiber Aerogel Membranes for High-Temperature Thermal Insulation. , 2022, ACS nano.

[9]  H. Bai,et al.  Preparation of Low-k Poly(dicyclopentadiene) Nanocomposites with Excellent Comprehensive Properties by Adding Larger POSS , 2022, Chemical Engineering Journal.

[10]  Rendang Yang,et al.  Nanoporous Regenerated Cellulose Separator for High-Performance Lithium Ion Batteries Prepared by Nonsolvent-Induced Phase Separation , 2021 .

[11]  E. B. Gowd,et al.  Nanoporous Crystalline Aerogels of Syndiotactic Polystyrene: Polymorphism, Dielectric, Thermal, and Acoustic Properties , 2021, Macromolecules.

[12]  X. Liao,et al.  Ultralow Dielectric Constant Polyarylene Ether Nitrile/Polyhedral Oligomeric Silsesquioxanes Foams with High Thermal Stabilities and Excellent Mechanical Properties Prepared by Supercritical CO2 , 2021, Advanced Engineering Materials.

[13]  D. Fang,et al.  Super-flexible polyimide nanofiber cross-linked polyimide aerogel membranes for high efficient flexible thermal protection , 2021 .

[14]  Meifang Zhu,et al.  Mechanically Strong and Multifunctional Hybrid Hydrogels with Ultrahigh Electrical Conductivity , 2021, Advanced Functional Materials.

[15]  Qinghua Zhang,et al.  Preparation of Low-dielectric Permittivity Polyimide Resins with High Surface Activity from Chemically Bonded Hyperbranched Polysiloxane , 2021, Chinese Journal of Polymer Science.

[16]  William R. Dichtel,et al.  Thermally conductive ultra-low-k dielectric layers based on two-dimensional covalent organic frameworks , 2021, Nature Materials.

[17]  Lei Jiang,et al.  Hierarchical Interface Engineering for Advanced Nanocellulosic Hybrid Aerogels with High Compressibility and Multifunctionality , 2021, Advanced Functional Materials.

[18]  J. Hannu,et al.  Lightweight porous silica foams with extreme-low dielectric permittivity and loss for future 6G wireless communication technologies , 2021, Nano Research.

[19]  Dezhen Wu,et al.  Structure-property relationship of low dielectric constant polyimide fibers containing fluorine groups , 2020 .

[20]  Xiaobo Liu,et al.  Low dielectric constant polymers for high speed communication network , 2020 .

[21]  A. Crosby,et al.  Mechanical Properties of Ultrathin Polymer Nanocomposites , 2020 .

[22]  Christina T. Lollar,et al.  High Modulus, Thermally Stable, and Self-Extinguishing Aramid Nanofiber Separators. , 2020, ACS applied materials & interfaces.

[23]  B. Bruggen,et al.  Aramid nanofiber and modified ZIF-8 constructed porous nanocomposite membrane for organic solvent nanofiltration , 2020, Journal of Membrane Science.

[24]  M. Lattuada,et al.  Strong, machinable and insulating chitosan-urea aerogels: towards ambient pressure drying of biopolymer aerogel monoliths. , 2020, ACS applied materials & interfaces.

[25]  Xiaobo Liu,et al.  Ultralow dielectric constant polyarylene ether nitrile foam with excellent mechanical properties , 2020 .

[26]  Jianchun Jiang,et al.  Synthesis of a Novel Bio-Oil-Based Hyperbranched Ester Plasticizer and Its Effects on Poly(vinyl chloride) Soft Films , 2020, ACS omega.

[27]  P. Gatenholm,et al.  Ambient‐Dried, 3D‐Printable and Electrically Conducting Cellulose Nanofiber Aerogels by Inclusion of Functional Polymers , 2020, Advanced Functional Materials.

[28]  Yang Fan,et al.  Mechanically strong and thermally insulating polyimide aerogels by homogeneity reinforcement of electrospun nanofibers , 2020 .

[29]  Q. Fu,et al.  Highly Thermoconductive, Thermostable, and Super‐Flexible Film by Engineering 1D Rigid Rod‐Like Aramid Nanofiber/2D Boron Nitride Nanosheets , 2020, Advanced materials.

[30]  Weibang Lu,et al.  Multi-Functional Aramid Nanofiber/Carbon Nanotube Hybrid Aerogel Films. , 2019, ACS nano.

[31]  Jia-rui Xu,et al.  A Facile Strategy for Non-fluorinated Intrinsic Low-k and Low-loss Dielectric Polymers: Valid Exploitation of Secondary Relaxation Behaviors , 2019, Chinese Journal of Polymer Science.

[32]  Xiaobo Liu,et al.  Design of bi-modal pore structure polyarylene ether nitrile/SiO2 foams with ultralow-k dielectric and wave transparent properties by supercritical carbon dioxide , 2019, Composites Part B: Engineering.

[33]  Zhao-Xia Guo,et al.  From Monomers to a Lasagna-Like Aerogel Monolith: An Assembling Strategy for Aramid Nanofibers. , 2019, ACS nano.

[34]  Jia-rui Xu,et al.  Facile Strategy for Intrinsic Low-k Dielectric Polymers: Molecular Design Based on Secondary Relaxation Behavior , 2019, Macromolecules.

[35]  J. Lyu,et al.  Nanofibrous Kevlar Aerogel Threads for Thermal Insulation in Harsh Environments. , 2019, ACS Nano.

[36]  H. Na,et al.  Preparation and characterization of ultralow dielectric and fibrous epoxy thermoset cured with poly(arylene ether ketone) containing phenolic hydroxyl groups , 2018, European Polymer Journal.

[37]  Hongtao Yu,et al.  Polyethylene/silica nanorod composites with reduced dielectric constant and enhanced mechanical strength , 2018, Journal of Applied Polymer Science.

[38]  Qinghua Zhang,et al.  Low dielectric constant and moisture-resistant polyimide aerogels containing trifluoromethyl pendent groups , 2018 .

[39]  R. Benavides,et al.  Mechanical properties and morphology of polystyrene-co-acrylic acid synthesized as membranes for fuel cells , 2017 .

[40]  M. Gray,et al.  Transport and removal of a solvent in porous media in the presence of bitumen, a highly viscous solute , 2017 .

[41]  Xudong Cheng,et al.  Silica aerogel/aramid pulp composites with improved mechanical and thermal properties , 2016 .

[42]  E. Akpinar,et al.  Determination of drying kinetics and convective heat transfer coefficients of ginger slices , 2016 .

[43]  Xinlin Tuo,et al.  Preparation and performance of aramid nanofiber membrane for separator of lithium ion battery , 2016 .

[44]  Yao Sun,et al.  Dielectric properties of paper-based composites at microwave frequency , 2016 .

[45]  Xudong Cheng,et al.  Aramid fibers reinforced silica aerogel composites with low thermal conductivity and improved mechanical performance , 2016 .

[46]  P. Budd,et al.  Molecular Mobility of the High Performance Membrane Polymer PIM-1 as Investigated by Dielectric Spectroscopy. , 2016, ACS macro letters.

[47]  E. Kauppinen,et al.  Ambient‐Dried Cellulose Nanofibril Aerogel Membranes with High Tensile Strength and Their Use for Aerosol Collection and Templates for Transparent, Flexible Devices , 2015 .

[48]  E. B. Gowd,et al.  Syndiotactic Polystyrene/Hybrid Silica Spheres of POSS Siloxane Composites Exhibiting Ultralow Dielectric Constant. , 2015, ACS applied materials & interfaces.

[49]  Q. Fang,et al.  Non‐Porous Low‐k Dielectric Films Based on a New Structural Amorphous Fluoropolymer , 2013, Advanced materials.

[50]  Willi Volksen,et al.  Low dielectric constant materials. , 2010, Chemical reviews.

[51]  Ari Sihvola,et al.  Equation for the effective permittivity of particle-filled composites for material design applications , 2007 .

[52]  C. Hansen,et al.  Hansen Solubility Parameters : A User's Handbook, Second Edition , 2007 .

[53]  Salvatore Torquato,et al.  Modulus-density scaling behaviour and framework architecture of nanoporous self-assembled silicas. , 2007, Nature materials.

[54]  M. Wübbenhorst,et al.  Molecular Dynamics of Atactic Poly(propylene) Investigated by Broadband Dielectric Spectroscopy , 2007 .