Polypyrrole Nanotubes and Their Carbonized Analogs: Synthesis, Characterization, Gas Sensing Properties

Polypyrrole (PPy) in globular form and as nanotubes were prepared by the oxidation of pyrrole with iron(III) chloride in the absence and presence of methyl orange, respectively. They were subsequently converted to nitrogen-containing carbons at 650 °C in an inert atmosphere. The course of carbonization was followed by thermogravimetric analysis and the accompanying changes in molecular structure by Fourier Transform Infrared and Raman spectroscopies. Both the original and carbonized materials have been tested in sensing of polar and non-polar organic vapors. The resistivity of sensing element using globular PPy was too high and only nanotubular PPy could be used. The sensitivity of the PPy nanotubes to ethanol vapors was nearly on the same level as that of their carbonized analogs (i.e., ~18% and 24%, respectively). Surprisingly, there was a high sensitivity of PPy nanotubes to the n-heptane vapors (~110%), while that of their carbonized analog remained at ~20%. The recovery process was significantly faster for carbonized PPy nanotubes (in order of seconds) compared with 10 s of seconds for original nanotubes, respectively, due to higher specific surface area after carbonization.

[1]  P. Su,et al.  Electrical and humidity sensing properties of carbon nanotubes-SiO2-poly(2-acrylamido-2-methylpropane sulfonate) composite material , 2006 .

[2]  M. Dresselhaus,et al.  Perspectives on carbon nanotubes and graphene Raman spectroscopy. , 2010, Nano letters.

[3]  Naader Alizadeh,et al.  Design and fabrication of gas sensor based on nanostructure conductive polypyrrole for determination of volatile organic solvents , 2010 .

[4]  D. Kopecký,et al.  Impedance properties of polypyrrolic sensors prepared by MAPLE technology , 2009 .

[5]  Xiaoming Yang,et al.  Fabrication of Polypyrrole/Ag Composite Nanotubes via In Situ Reduction of AgNO3 on Polypyrrole Nanotubes , 2010 .

[6]  A. Goldoni,et al.  Single-wall carbon nanotube interaction with gases: sample contaminants and environmental monitoring. , 2003, Journal of the American Chemical Society.

[7]  L. Brinson,et al.  Functionalized SWNT/polymer nanocomposites for dramatic property improvement , 2005 .

[8]  V. Pavlínek,et al.  Electrorheological properties of suspensions of hollow globular titanium oxide/polypyrrole particles , 2011, Colloid and Polymer Science.

[9]  Xiaogang Zhang,et al.  Porous nitrogen-doped carbon nanotubes derived from tubular polypyrrole for energy-storage applications. , 2013, Chemistry.

[10]  I-Cherng Chen,et al.  A micromachined resistive-type humidity sensor with a composite material as sensitive film , 2006 .

[11]  J. Stejskal,et al.  Polyaniline and polypyrrole: A comparative study of the preparation , 2007 .

[12]  J.E.G. de Souza,et al.  Polypyrrole thin films gas sensors , 2001 .

[13]  G. Ćirić-Marjanović,et al.  Carbonised polyaniline and polypyrrole: towards advanced nitrogen-containing carbon materials , 2013, Chemical Papers.

[14]  X. Tao,et al.  Easy synthesis of carbon nanotubes with polypyrrole nanotubes as the carbon precursor , 2009 .

[15]  G. Botton,et al.  Polymerization from the surface of single-walled carbon nanotubes - preparation and characterization of nanocomposites. , 2003, Journal of the American Chemical Society.

[16]  Naader Alizadeh,et al.  Methanol selective gas sensor based on nano-structured conducting polypyrrole prepared by electrochemically on interdigital electrodes for biodiesel analysis , 2013 .

[17]  V. Pavlínek,et al.  SYNTHESIS OF TITANATE/POLYPYRROLE COMPOSITE ROD-LIKE PARTICLES AND THE ROLE OF CONDUCTING POLYMER ON ELECTRORHEOLOGICAL EFFICIENCY , 2012 .

[18]  J. Stejskal,et al.  Polyaniline in Electrorheology , 2006 .

[19]  L. Lira,et al.  Use of conducting polypyrrole blends as gas sensors , 2005 .

[20]  Zhi‐Xin Guo,et al.  Polymers containing fullerene or carbon nanotube structures , 2004 .

[21]  P. R. Deshmukh,et al.  Fabrication and performance of polypyrrole (Ppy)/TiO2 heterojunction for room temperature operated LPG sensor , 2013 .

[22]  S. Fedorova,et al.  Polyaniline and polypyrrole prepared in the presence of surfactants: a comparative conductivity study , 2003 .

[23]  P. Slobodian,et al.  Multi-wall carbon nanotube networks as potential resistive gas sensors for organic vapor detection , 2011 .

[24]  D. Rakovic,et al.  Vibrational spectroscopy of polypyrrole, theoretical study , 1995 .

[25]  Peng Liu,et al.  Modifications of carbon nanotubes with polymers , 2005 .

[26]  Vijay K. Varadan,et al.  A compact wireless gas sensor using a carbon nanotube/PMMA thin film chemiresistor , 2004 .

[27]  F. Yan,et al.  Facile preparation of water dispersible polypyrrole nanotube-supported silver nanoparticles for hydrogen peroxide reduction and surface-enhanced Raman scattering , 2012 .

[28]  M. Machovský,et al.  Increased sensitivity of multiwalled carbon nanotube network by PMMA functionalization to vapors with affine polarity , 2012 .

[29]  M. Trchová,et al.  Properties and morphology of polypyrrole containing a surfactant , 2003 .

[30]  Vijay K. Varadan,et al.  Carbon nanotube/PMMA composite thin films for gas-sensing applications , 2003 .

[31]  Kyeongjae Cho,et al.  Ab Initio Study of Doped Carbon Nanotube Sensors , 2003 .

[32]  M. Li,et al.  Carbon-nitrogen/graphene composite as metal-free electrocatalyst for the oxygen reduction reaction , 2011 .

[33]  Xiaoming Yang,et al.  Ag/AgCl-decorated polypyrrole nanotubes and their sensory properties , 2010 .

[34]  D. Kopecký,et al.  Polypyrrole salts and bases: superior conductivity of nanotubes and their stability towards the loss of conductivity by deprotonation , 2016 .

[35]  Xiaoming Yang,et al.  Polypyrrole/silver composite nanotubes for gas sensors , 2010 .

[36]  J. Stejskal,et al.  Polypyrrole–silver composites prepared by the reduction of silver ions with polypyrrole nanotubes , 2013 .

[37]  Jaroslav Stejskal,et al.  Synthesis and structural study of polypyrroles prepared in the presence of surfactants , 2003 .

[38]  E. Llobet.  Gas sensors using carbon nanomaterials: A review , 2013 .

[39]  Yunhui Huang,et al.  Nitrogen‐Doped Porous Carbon Nanofiber Webs as Anodes for Lithium Ion Batteries with a Superhigh Capacity and Rate Capability , 2012, Advanced materials.

[40]  Y. Kudoh.  Properties of polypyrrole prepared by chemical polymerization using aqueous solution containing Fe2(SO4)3 and anionic surfactant , 1996 .

[41]  A. Kukla,et al.  Comparative analysis of sensor responses of thin conducting polymer films to organic solvent vapors , 2011 .

[42]  A. Hirsch.  Functionalization of single-walled carbon nanotubes. , 2002, Angewandte Chemie.