Higher critical plaque wall stress in patients who died of coronary artery disease compared with those who died of other causes: a 3D FSI study based on ex vivo MRI of coronary plaques.

Mechanical forces play an important role in the rupture of vulnerable plaques. This process is often associated with cardiovascular syndromes, such as heart attack and stroke. In this study, magnetic resonance imaging (MRI)-based models were used to investigate the association between plaque wall stress (PWS) and coronary artery disease (CAD). Ex vivo MRI data of coronary plaques from 12 patients were used to construct 12 three-dimensional (3D) fluid-structure interaction (FSI) computational models. Six of the patients had died from CAD and six had died from non-CAD causes. PWS was assessed using all nodal points on the lumen surface of each plaque. The maximum PWS from all possible vulnerable sites of each plaque was defined as the 3D critical plaque wall stress (CPWS). Mean 3D CPWS in the CAD group was 94.3% higher than that in the non-CAD group (265.6 vs. 136.7 kPa, P=0.0029). There was no statistically significant difference in global maximum plaque wall stress (GMPWS) between the two groups (P=0.347). There was also no statistically significant difference in plaque burden between the CAD group (84.4±5%) and the non-CAD group (82.0±8%, P=0.552). The results indicate that plaques from patients who died from CAD were associated with higher CPWS compared with those from patients who died from non-CAD causes. With further validation, analysis of CPWS may prove to be an important component in assessment of plaque vulnerability.

[1]  Dalin Tang,et al.  In Vivo IVUS-Based 3-D Fluid–Structure Interaction Models With Cyclic Bending and Anisotropic Vessel Properties for Human Atherosclerotic Coronary Plaque Mechanical Analysis , 2009, IEEE Transactions on Biomedical Engineering.

[2]  F. Grosveld,et al.  Atherosclerotic Lesion Size and Vulnerability Are Determined by Patterns of Fluid Shear Stress , 2006, Circulation.

[3]  C. Yuan,et al.  Plaque Rupture in the Carotid Artery Is Localized at the High Shear Stress Region: A Case Report , 2007, Stroke.

[4]  Frank Gijsen,et al.  Shear stress and advanced atherosclerosis in human coronary arteries. , 2013, Journal of biomechanics.

[5]  C. Yuan,et al.  Quantifying effect of intraplaque hemorrhage on critical plaque wall stress in human atherosclerotic plaques using three-dimensional fluid-structure interaction models. , 2012, Journal of biomechanical engineering.

[6]  Martin J Graves,et al.  Structural analysis and magnetic resonance imaging predict plaque vulnerability: a study comparing symptomatic and asymptomatic individuals. , 2007, Journal of vascular surgery.

[7]  Chun Yuan,et al.  MRI of carotid atherosclerosis: clinical implications and future directions , 2010, Nature Reviews Cardiology.

[8]  Michael C. McDaniel,et al.  Coronary Artery Wall Shear Stress Is Associated With Progression and Transformation of Atherosclerotic Plaque and Arterial Remodeling in Patients With Coronary Artery Disease , 2011, Circulation.

[9]  Dalin Tang,et al.  In Vivo/Ex Vivo MRI-Based 3D Non-Newtonian FSI Models for Human Atherosclerotic Plaques Compared with Fluid/Wall-Only Models. , 2007, Computer modeling in engineering & sciences : CMES.

[10]  Dalin Tang,et al.  An experimental study on the ultimate strength of the adventitia and media of human atherosclerotic carotid arteries in circumferential and axial directions. , 2009, Journal of biomechanics.

[11]  R. Kamm,et al.  Distribution of Circumferential Stress in Ruptured and Stable Atherosclerotic Lesions A Structural Analysis With Histopathological Correlation , 1993, Circulation.

[12]  Dalin Tang,et al.  3D MRI-Based Multicomponent FSI Models for Atherosclerotic Plaques , 2004, Annals of Biomedical Engineering.

[13]  Renu Virmani,et al.  Histopathology of Carotid Atherosclerotic Disease , 2006, Neurosurgery.

[14]  C. Yuan,et al.  A negative correlation between human carotid atherosclerotic plaque progression and plaque wall stress: in vivo MRI-based 2D/3D FSI models. , 2008, Journal of Biomechanics.

[15]  Jacques Ohayon,et al.  Biomechanical interaction between cap thickness, lipid core composition and blood pressure in vulnerable coronary plaque: impact on stability or instability , 2004, Coronary artery disease.

[16]  S. A. Gutnikov,et al.  Reanalysis of the Final Results of the European Carotid Surgery Trial , 2003, Stroke.

[17]  M. Wintermark,et al.  Carotid Atheroma Rupture Observed In Vivo and FSI-Predicted Stress Distribution Based on Pre-rupture Imaging , 2010, Annals of Biomedical Engineering.

[18]  Jie Zheng,et al.  Effect of Stenosis Asymmetry on Blood Flow and Artery Compression: A Three-Dimensional Fluid-Structure Interaction Model , 2003, Annals of Biomedical Engineering.

[19]  S. Alper,et al.  Hemodynamic shear stress and its role in atherosclerosis. , 1999, JAMA.

[20]  Dalin Tang,et al.  Sites of Rupture in Human Atherosclerotic Carotid Plaques Are Associated With High Structural Stresses: An In Vivo MRI-Based 3D Fluid-Structure Interaction Study , 2009, Stroke.

[21]  J. Petruccelli,et al.  Local Maximal Stress Hypothesis and Computational Plaque Vulnerability Index for Atherosclerotic Plaque Assessment , 2005, Annals of Biomedical Engineering.

[22]  Michail I. Papafaklis,et al.  Prediction of Progression of Coronary Artery Disease and Clinical Outcomes Using Vascular Profiling of Endothelial Shear Stress and Arterial Plaque Characteristics: The PREDICTION Study , 2012, Circulation.

[23]  D. Sackett,et al.  Benefit of carotid endarterectomy in patients with symptomatic moderate or severe stenosis. North American Symptomatic Carotid Endarterectomy Trial Collaborators. , 1998, The New England journal of medicine.

[24]  S. Einav,et al.  Influence of microcalcifications on vulnerable plaque mechanics using FSI modeling. , 2008, Journal of biomechanics.