Physical properties of the human head: mass, center of gravity and moment of inertia.

This paper presents a synthesis of biomedical investigations of the human head with specific reference to certain aspects of physical properties and development of anthropometry data, leading to the advancement of dummies used in crashworthiness research. As a significant majority of the studies have been summarized as reports, an effort has been made to chronologically review the literature with the above objectives. The first part is devoted to early studies wherein the mass, center of gravity (CG), and moment of inertia (MOI) properties are obtained from human cadaver experiments. Unembalmed and preserved whole-body and isolated head and head-neck experiments are discussed. Acknowledging that the current version of the Hybrid III dummy is the most widely used anthropomorphic test device in motor vehicle crashworthiness research for frontal impact applications for over 30 years, bases for the mass and MOI-related data used in the dummy are discussed. Since the development and federalization of the dummy in the United States, description of methods used to arrive at these properties form a part of the manuscript. Studies subsequent to the development of this dummy including those from the US Military are also discussed. As the head and neck are coupled in any impact, and increasing improvements in technology such as advanced airbags, and pre-tensioners and load limiters in manual seatbelts affect the kinetics of the head-neck complex, the manuscript underscores the need to pursue studies to precisely determine all the physical properties of the head. Because the most critical parameters (locations of CG and occipital condyles (OC), mass, and MOI) have not been determined on a specimen-by-specimen basis in any single study, it is important to gather these data in future experiments. These critical data will be of value for improving occupant safety, designing advanced restraint systems, developing second generation dummies, and assessing the injury mitigating characteristics of modern vehicle components in all impact modalities.

[1]  J. Bland,et al.  Luschka's Joint. , 1965 .

[2]  Harold J. Mertz,et al.  BIOFIDELITY OF THE HYBRID III HEAD , 1985 .

[3]  John W. Melvin,et al.  Review of biomechanical impact response and injury in the automotive environment. Task B final report , 1991 .

[4]  L. M. Thomas,et al.  Fracture Behavior of the Skull Frontal Bone Against Cylindrical Surfaces , 1970 .

[5]  Erik G. Takhounts,et al.  DEVELOPMENT OF IMPROVED INJURY CRITERIA FOR THE ASSESSMENT OF ADVANCED AUTOMOTIVE RESTRAINT SYSTEMS - II , 1999 .

[6]  R Voigt,et al.  BREAKING STRENGTH OF THE HUMAN SKULL VS IMPACT SURFACE CURVATURE , 1973 .

[7]  Roger W Nightingale,et al.  A kinematic and anthropometric study of the upper cervical spine and the occipital condyles. , 2007, Journal of biomechanics.

[8]  V. R. Hodgson,et al.  Head Model for Impact , 1972 .

[9]  Narayan Yoganandan,et al.  Worldsid assessment of far side impact countermeasures. , 2006, Annual proceedings. Association for the Advancement of Automotive Medicine.

[10]  N Yoganandan,et al.  Biomechanical study of pediatric human cervical spine: a finite element approach. , 2000, Journal of biomechanical engineering.

[11]  Y King Liu,et al.  Lightweight low-profile nine-accelerometer package to obtain head angular accelerations in short-duration impacts. , 2006, Journal of biomechanics.

[12]  C. E. Clauser,et al.  Weight, volume, and center of mass of segments of the human body , 1969 .

[13]  Edward B. Becker.  Measurement of Mass Distribution Parameters of Anatomical Segments , 1972 .

[14]  H. J. Woltring,et al.  Omni-Directional Human Head-Neck Response , 1986 .

[15]  Y K Liu,et al.  Inertial properties of a segmented cadaver trunk: their implications in acceleration injuries. , 1971, Aerospace medicine.

[16]  A. King,et al.  Measurement of Angular Acceleration of a Rigid Body Using Linear Accelerometers , 1975 .

[17]  W. T. Dempster,et al.  Properties of body segments based on size and weight , 1967 .

[18]  Rolf H Eppinger,et al.  Development of Side Impact Thoracic Injury Criteria and Their Application to the Modified ES-2 Dummy with Rib Extensions (ES-2re). , 2003, Stapp car crash journal.

[19]  Christian Wilhelm Braune,et al.  Über den Schwerpunkt des menschlichen Körpers : mit Rücksicht auf die Ausrüstung des deutschen Infanteristen , 1889 .

[20]  Chris Albery,et al.  Design and Development of Anthropometrically Correct Head Forms for Joint Strike Fighter Ejection Seat Testing , 2005 .

[21]  Richard M. Morgan,et al.  Injuries to the cervical spine caused by a distributed frontal load to the chest , 1982 .

[22]  Laurence Michael.  Frontiers in head and neck trauma: clinical and biomechanical. , 2001 .

[23]  Narayan Yoganandan,et al.  Whole body kinematics using post mortem human subjects in experimental rear impact , 2000 .

[24]  T. Wingate Todd,et al.  Thickness of the subcutaneous tissues in the living and the dead , 1928 .

[25]  E. H. Harris,et al.  Mass, Volume, Center of Mass, and Mass Moment of Inertia of Head and Head and Neck of Human Body , 1973 .

[26]  Mat Philippens,et al.  WorldSID Dummy Head-Neck Biofidelity Response. , 2004, Stapp car crash journal.

[27]  Robert P. Hubbard,et al.  Definition and development of a crash dummy head , 1974 .

[28]  R. F. Chandler,et al.  Mass Distribution Properties of the Male Cadaver , 1975 .

[29]  C. E. Clauser,et al.  Anthropometric Relationships of Body and Body Segment Moments of Inertia , 1980 .

[30]  Narayan Yoganandan,et al.  Comparison of PMHS, WorldSID, and THOR-NT responses in simulated far side impact. , 2007, Stapp car crash journal.

[31]  John M. Cavanaugh,et al.  Biomechanical Response and Injury Tolerance of the Pelvis in Twelve Sled Side Impacts , 1990 .

[32]  Narayan Yoganandan,et al.  Level-dependent coronal and axial moment-rotation corridors of degeneration-free cervical spines in lateral flexion. , 2007, The Journal of bone and joint surgery. American volume.

[33]  Claude Tarriere,et al.  The Eurosid Side Impact Dummy , 1985 .

[34]  Dimitrios Kallieris,et al.  Head and neck injury resulting from low velocity direct impact , 1993 .

[35]  Emil. Harless,et al.  Lehrbuch der plastischen Anatomie : für akademische Anstalten und zum Selbstunterricht : mit vielen Tabellen / von Emil Harless ; Hrsg. und mit einem Anh. vers. von R. Hartmann. , 1876 .

[36]  Erich Schuller,et al.  CENTER OF GRAVITY AND MOMENTS OF INERTIA OF HUMAN HEADS , 1979 .

[37]  John T. McConville,et al.  INVESTIGATION OF INERTIAL PROPERTIES OF THE HUMAN BODY , 1975 .

[38]  Harold J. Mertz,et al.  Hybrid III: The First Human-Like Crash Test Dummy , 1994 .

[39]  D. H. Robbins,et al.  Anthropometric specifications for mid-sized male dummy, volume 2, and for small female and large male dummies, volume 3. Final report , 1983 .

[40]  Richard G. Snyder,et al.  Seated posture of vehicle occupants , 1983 .

[41]  Narayan Yoganandan,et al.  Upper Neck Forces and Moments and Cranial Angular Accelerations in Lateral Impact , 2008, Annals of Biomedical Engineering.

[42]  S. Margulies,et al.  Infant skull and suture properties: measurements and implications for mechanisms of pediatric brain injury. , 2000, Journal of biomechanical engineering.

[43]  Rolf H Eppinger,et al.  Development of a new biofidelity ranking system for anthropomorphic test devices. , 2002, Stapp car crash journal.

[44]  Y. K. Liu,et al.  The inertial and geometrical properties of helmets. , 1984, Medicine and science in sports and exercise.

[45]  L. M. Patrick,et al.  Investigation of the Kinematics and Kinetics of Whiplash , 1967 .

[46]  Narayan Yoganandan,et al.  Characterizing occipital condyle loads under high-speed head rotation. , 2005, Stapp car crash journal.

[47]  R. Terry,et al.  On measuring and photographing the cadaver , 1940 .

[48]  Anthony Sances,et al.  Multivariate head injury threshold measures for various sized children seated behind vehicle seats in rear impacts. , 2004, Biomedical sciences instrumentation.