Ballistic performance of functionally graded B4C/Al composites without abrupt interfaces: experiments and simulations

[1]  G. Wang,et al.  Mechanical properties of Al2O3 and Al2O3/Al interpenetrated functional gradient structures by 3D printing and melt infiltration , 2023, Journal of Alloys and Compounds.

[2]  R. He,et al.  3D-printed bioinspired Al2O3/polyurea dual-phase architecture with high robustness, energy absorption, and cyclic life , 2023, Chemical Engineering Journal.

[3]  D. Mohotti,et al.  Ballistic impact response of flexible and rigid UHMWPE textile composites: Experiments and simulations , 2022, Defence Technology.

[4]  Yuxue Ge,et al.  Damage assessment of aircraft wing subjected to blast wave with finite element method and artificial neural network tool , 2022, Defence Technology.

[5]  Liangmo Wang,et al.  Numerical investigation of ballistic performance of SiC/TC4/UHMWPE composite armor against 7.62 AP projectile , 2022, Ceramics International.

[6]  Yang Wang,et al.  Mechanical response and damage evolution of bio-inspired B4C-reinforced 2024Al composites subjected to quasi-static and dynamic loadings , 2022, Materials Science and Engineering: A.

[7]  A. Gupta,et al.  Ballistic Performance of Functionally Graded Boron Carbide Reinforced Al – Zn – Mg - Cu Alloy , 2022, Journal of Materials Research and Technology.

[8]  W. Yao,et al.  Determination of and Experimental Research on the Parameters of the Johnson–Holmquist-II (JH-2) Constitutive Model for Granite , 2022, Rock Mechanics and Rock Engineering.

[9]  Q. Zhang,et al.  Microstructure and mechanical properties of B4C/2024Al functionally gradient composites , 2022, Materials & Design.

[10]  Yang Wang,et al.  Dynamic mechanical response and damage mechanisms of nacre-inspired 2024Al/B4C composite at elevated temperature , 2022, Materials Science and Engineering: A.

[11]  Tian-bao Ma,et al.  Relationships between distribution characteristics of ceramic fragments and anti-penetration performance of ceramic composite bulletproof insert plates , 2021, Defence Technology.

[12]  J. Liu,et al.  A metal/UHMWPE/SiC multi-layered composite armor against ballistic impact of flat-nosed projectile , 2021 .

[13]  Wang Jian,et al.  Research on impact resistance of ceramic matrix composites , 2021, Composite structures.

[14]  Hong‐Zhang Geng,et al.  Ballistic impact tests and stacked shell simulation analysis of aramid fabric containment system , 2020 .

[15]  D. Mohotti,et al.  Experimental, numerical and analytical study on the shock wave propagation through impedance-graded multi-metallic systems , 2020, International Journal of Mechanical Sciences.

[16]  M. Apalak,et al.  Experimental study on structure optimization of functionally graded sandwich plates under ballistic impact , 2020, Journal of Composite Materials.

[17]  B. Han,et al.  Influence of prestress on ballistic performance of bi-layer ceramic composite armors: Experiments and simulations , 2019, Composite Structures.

[18]  A. Rabiei,et al.  Ballistic performance of composite metal foam against large caliber threats , 2019, Composite Structures.

[19]  Yuhang Yao,et al.  Numerical study the effects of defects on the anti-penetration performance of Ti6Al4V–Al3Ti Laminated Composites , 2019, Materials Research Express.

[20]  Q. Jiang,et al.  Microstructures and mechanical characterizations of high-performance nacre-inspired Al/Al2O3 composites , 2019, Composites Part A: Applied Science and Manufacturing.

[21]  H. Arik,et al.  Experimental study on mechanical and ballistic behaviours of silicon carbide reinforced functionally graded aluminum foam composites , 2019, Composites Part B: Engineering.

[22]  Chengqing Wu,et al.  Experimental and numerical investigations of penetration resistance of ultra-high strength concrete protected with ceramic balls subjected to projectile impact , 2019, Ceramics International.

[23]  T. Germann,et al.  Shock induced damage and fracture in SiC at elevated temperature and high strain rate , 2019, Acta Materialia.

[24]  J. Qiao,et al.  The microstructure and ballistic performance of B4C/AA2024 functionally graded composites with wide range B4C volume fraction , 2019, Composites Part B: Engineering.

[25]  Qitian Sun,et al.  Experimental and numerical analyses of the penetration resistance of ceramic-metal hybrid structures , 2019, Composite Structures.

[26]  Wenrui Wang,et al.  Anti-penetration performance of high entropy alloy–ceramic gradient composites , 2018, International Journal of Minerals, Metallurgy, and Materials.

[27]  K. Arslan,et al.  Experimental damage evaluation of honeycomb sandwich structures with Al/B4C FGM face plates under high velocity impact loads , 2018, Composite Structures.

[28]  Kristen L. Scotti,et al.  Freeze Casting: A Review of Processing, Microstructure and Properties via the Open Data Repository, FreezeCasting.net , 2017, 1710.00037.

[29]  Yu-Liang Chen,et al.  Effect of varied alumina/zirconia content on ballistic performance of a functionally graded material , 2017 .

[30]  Lei Liu,et al.  Synthetic nacre by predesigned matrix-directed mineralization , 2016, Science.

[31]  M. Apalak,et al.  Experimental damage analysis of Al/SiC functionally graded sandwich plates under ballistic impact , 2016 .

[32]  A. Kidane,et al.  Design optimization of continuously and discretely graded foam materials for efficient energy absorption , 2016 .

[33]  Yu-Liang Chen,et al.  Design and impact resistant analysis of functionally graded Al2O3–ZrO2 ceramic composite , 2016 .

[34]  Weilan Liu,et al.  Influence of different back laminate layers on ballistic performance of ceramic composite armor , 2015 .

[35]  Aswani Kumar Bandaru,et al.  The effect of hybridization on the ballistic impact behavior of hybrid composite armors , 2015 .

[36]  O. Keles,et al.  The ballistic performance of SiC–AA7075 functionally graded composite produced by powder metallurgy , 2014 .

[37]  J. Reddy,et al.  Experimental and numerical investigations of low velocity impact on functionally graded circular plates , 2014 .

[38]  J. Ning,et al.  Dynamic response of alumina ceramics impacted by long tungsten projectile , 2013 .

[39]  Y. Li,et al.  The influence of ALN-Al gradient material gradient index on ballistic performance , 2013 .

[40]  Bülent Ekici,et al.  Ballistic resistance of high hardness armor steels against 7.62 mm armor piercing ammunition , 2013 .

[41]  Madhu,et al.  Ballistic Studies on TiB2-Ti Functionally Graded Armor Ceramics , 2012 .

[42]  Romesh C. Batra,et al.  Effect of matrix on ballistic performance of soft body armor , 2012 .

[43]  D. Hui,et al.  A new concept of shock mitigation by impedance-graded materials , 2011 .

[44]  R. Ritchie.  The conflicts between strength and toughness. , 2011, Nature materials.

[45]  Vikram Deshpande,et al.  Explorations of Hybrid Sandwich Panel Concepts for Projectile Impact Mitigation , 2011 .

[46]  R. Gunes,et al.  Elastic response of functionally graded circular plates under a drop-weight , 2010 .

[47]  W. Fourney,et al.  Application of 3D image correlation for full-field transient plate deformation measurements during blast loading , 2009 .

[48]  R. Ritchie,et al.  On the Fracture Toughness of Advanced Materials , 2009 .

[49]  G. R. Johnson,et al.  Response of boron carbide subjected to high-velocity impact , 2008 .

[50]  Eduardo Saiz,et al.  Ice-templated porous alumina structures , 2007, 1710.04651.

[51]  M. Nygren,et al.  Titanium–titanium diboride composites as part of a gradient armour material , 2005 .

[52]  Yen-Ling Chung,et al.  Cracking in coating–substrate composites with multi-layered and FGM coatings , 2003 .

[53]  P. Zhai,et al.  The Optimization Design on Metal/Ceramic FGM Armor with Neural Net and Conjugate Gradient Method , 2003 .

[54]  Gérard A. Maugin,et al.  Numerical simulation of two-dimensional wave propagation in functionally graded materials , 2003 .

[55]  K. T. Ramesh,et al.  Dynamic characterization of layered and graded structures under impulsive loading , 2001 .

[56]  Hugh A. Bruck,et al.  A one-dimensional model for designing functionally graded materials to manage stress waves , 2000 .

[57]  Frank Ko,et al.  Modeling of the ballistic behavior of gradient design composite armors , 2000 .

[58]  G. R. Johnson,et al.  Response of boron carbide subjected to large strains, high strain rates, and high pressures , 1999 .

[59]  B. Chen,et al.  Development and Ballistic Testing of a Functionally Gradient Ceramic/Metal Applique , 1999 .

[60]  Ernest S. C. Chin,et al.  Army focused research team on functionally graded armor composites , 1999 .

[61]  T. N. Claytor,et al.  Response of aluminium-infiltrated boron carbide cermets to shock wave loading , 1994, Journal of Materials Science.

[62]  Y. Benveniste,et al.  A new approach to the application of Mori-Tanaka's theory in composite materials , 1987 .

[63]  B. Lawn,et al.  Indentation fracture: principles and applications , 1975 .

[64]  S. R. Bodner,et al.  Analysis of the mechanics of perforation of projectiles in metallic plates , 1974 .

[65]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[66]  Yang Wang,et al.  A novel approach for developing boron carbide (B4C)/cyanate ester (CE) co-continuous Functionally Graded Materials (FGMs) with eliminated abrupt interfaces , 2021 .

[67]  N. Çamuşcu,et al.  On the ballistic performance of the AA7075 based functionally gradeinforcement , 2021, Metallic Materials.

[68]  Long Chen.  CONJUGATE GRADIENT METHODS , 2019 .

[69]  G. R. Johnson,et al.  A CONSTITUTIVE MODEL AND DATA FOR METALS SUBJECTED TO LARGE STRAINS, HIGH STRAIN RATES AND HIGH TEMPERATURES , 2018 .

[70]  J. Reddy,et al.  The elasto-plastic impact analysis of functionally graded circular plates under low-velocities , 2011 .

[71]  W. Hager,et al.  A SURVEY OF NONLINEAR CONJUGATE GRADIENT METHODS , 2005 .

[72]  Tore Børvik,et al.  Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and c , 2002 .