A high-fidelity harmonic drive model

In this paper, a new model of the harmonic drive transmission is presented. The purpose of this work is to better understand the transmission hysteresis behavior while constructing a new type of comprehensive harmonic drive model. The four dominant aspects of harmonic drive behavior - nonlinear viscous friction, nonlinear stiffness, hysteresis, and kinematic error - are all included in the model. The harmonic drive is taken to be a black box, and a dynamometer is used to observe the input/output relations of the transmission. This phenomenological approach does not require any specific knowledge of the internal kinematics. In a novel application, the Maxwell resistive-capacitor hysteresis model is applied to the harmonic drive. In this model, sets of linear stiffness elements in series with Coulomb friction elements are arranged in parallel to capture the hysteresis behavior of the transmission. The causal hysteresis model is combined with nonlinear viscous friction and spectral kinematic error models to accurately represent the harmonic drive behavior. Empirical measurements are presented to quantify all four aspects of the transmission behavior. These measurements motivate the formulation of the complete model. Simulation results are then compared to additional measurements of the harmonic drive performance.

[1]  Malcolm Good,et al.  Dynamic Models for Control System Design of Integrated Robot and Drive Systems , 1985 .

[2]  T. Marilier,et al.  Non-linear mechanic and electric be-havior of a robot axis with a''harmonic-drive''gear , 1989 .

[3]  Hiroyuki Kojima,et al.  Robot vibrations caused by torque ripples in power transmission mechanisms. , 1989 .

[4]  Ted Nye,et al.  Harmonic drive gear error: Characterization and compensation for precision pointing and tracking , 1991 .

[5]  Paolo Nistri,et al.  Mathematical Models for Hysteresis , 1993, SIAM Rev..

[6]  Dana R. Yoerger,et al.  Study of Dominant Performance Characteristics in Robot Transmissions , 1993 .

[7]  Dusan Krajcinovic,et al.  Preisach model and hysteretic behaviour of ductile materials , 1993 .

[8]  Jorge Angeles,et al.  Nonlinear modeling and parameter identification of harmonic drive robotic transmissions , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[9]  Warren P. Seering,et al.  A nonlinear model of a harmonic drive gear transmission , 1996, IEEE Trans. Robotics Autom..

[10]  Andrew A. Goldenberg,et al.  An Experimental Study of Nonlinear Stiffness, Hysteresis, and Friction Effects in Robot Joints with Harmonic Drives and Torque Sensors , 1997, Int. J. Robotics Res..

[11]  Hamid D. Taghirad,et al.  Modeling and Parameter Identification of Harmonic Drive Systems , 1998 .

[12]  Thomas J. Royston,et al.  Modeling piezoceramic transducer hysteresis in the structural vibration control problem , 2000 .

[13]  Fathi H. Ghorbel,et al.  On the Kinematic Error in Harmonic Drive Gears , 2001 .

[14]  Fathi H. Ghorbel,et al.  Closed-loop compensation of kinematic error in harmonic drives for precision control applications , 2002, IEEE Trans. Control. Syst. Technol..

[15]  Fathi H. Ghorbel,et al.  A new dynamic model of hysteresis in harmonic drives , 2003, IEEE Trans. Ind. Electron..

[16]  J.P. Desai,et al.  Modeling and control of the Mitsubishi PA-10 robot arm harmonic drive system , 2005, IEEE/ASME Transactions on Mechatronics.

[17]  Wen-Hong Zhu,et al.  Adaptive Control of Harmonic Drives , 2007 .

[18]  Thomas J. Royston,et al.  Experimental investigation and model development for a harmonic drive transmission , 2007, SPIE Optical Engineering + Applications.

[19]  Thomas J. Royston,et al.  Leveraging the Equivalence of Hysteresis Models From Different Fields for Analysis and Numerical Simulation of Jointed Structures , 2007 .