Multibeam Interferometer Using a Photonic Crystal Fiber with Two Asymmetric Cores for Torsion, Strain and Temperature Sensing

We present a fiber-optic multibeam Mach-Zehnder interferometer (m-MZI) for simultaneous multi-parameter measurement. The m-MZI is comprised of a section of photonic crystal fiber integrated with two independent cores of distinct construction and birefringence properties characterized for torsion, strain and temperature sensing. Due to the presence of small core geometry and use of a short fiber length, the sensing device demonstrates inter-modal interference in the small core alongside the dominant inter-core interference between the cores for each of the orthogonal polarizations. The output spectrum of the device is characterized by the three-beam interference model and is polarization-dependent. The two types of interferometers present in the fiber m-MZI exhibit distinct sensitivities to torsion, strain and temperature for different polarizations, and matrix coefficients allowing simultaneous measurement of the three sensing parameters are proposed in experiment.

[1]  Youngjoo Chung,et al.  Enhanced transverse load sensitivity by using a highly birefringent photonic crystal fiber with larger air holes on one axis. , 2010, Applied optics.

[2]  Youngjoo Chung,et al.  Simultaneous multi-parameter measurement using Sagnac loop hybrid interferometer based on a highly birefringent photonic crystal fiber with two asymmetric cores. , 2015, Optics express.

[3]  J M Baptista,et al.  Highly birefringent photonic bandgap Bragg fiber loop mirror for simultaneous measurement of strain and temperature. , 2011, Optics letters.

[4]  Rodrigo Amezcua-Correa,et al.  Multicore fiber sensor for high-temperature applications up to 1000°C. , 2014, Optics letters.

[5]  Bo Liu,et al.  Multi-mode interferometer-based twist sensor with low temperature sensitivity employing square coreless fibers. , 2013, Optics express.

[6]  O. Frazão,et al.  Simultaneous measurement of curvature and strain using a suspended multicore fiber. , 2011, Optics letters.

[7]  Li Pei,et al.  All-fiber multipath Mach⬜Zehnder interferometer based on a four-core fiber for sensing applications , 2016 .

[8]  Youngjoo Chung,et al.  Temperature-Insensitive Torsion Sensor With Enhanced Sensitivity by Use of a Highly Birefringent Photonic Crystal Fiber , 2010, IEEE Photonics Technology Letters.

[9]  P. Russell,et al.  Endlessly single-mode photonic crystal fiber. , 1997, Optics letters.

[10]  Yongqin Yu,et al.  Micro-bending vector sensor based on six-air-hole grapefruit microstructure fiber using lateral offset splicing. , 2015, Optics express.

[11]  D. M. Atkin,et al.  All-silica single-mode optical fiber with photonic crystal cladding. , 1996, Optics letters.

[12]  Chi Chiu Chan,et al.  Strain Sensor Realized by Using Low-Birefringence Photonic-Crystal-Fiber-Based Sagnac Loop , 2010, IEEE Photonics Technology Letters.

[13]  Youngjoo Chung,et al.  Twin core photonic crystal fiber for in-line Mach-Zehnder interferometric sensing applications. , 2009, Optics express.

[14]  Youngjoo Chung,et al.  High-Sensitivity Temperature Sensor Based on a Selectively-Polymer-Filled Two-Core Photonic Crystal Fiber In-Line Interferometer , 2015, IEEE Sensors Journal.

[15]  Ying Wang,et al.  Multi-Components Interferometer Based on Partially Filled Dual-Core Photonic Crystal Fiber for Temperature and Strain Sensing , 2016, IEEE Sensors Journal.

[16]  Philippe Roy,et al.  Fiber Loop Mirror Using a Small Core Microstructured Fiber for Strain and Temperature Discrimination , 2010, IEEE Photonics Technology Letters.

[17]  Xiaoyi Bao,et al.  Highly sensitive in-fiber interferometric refractometer with temperature and axial strain compensation. , 2013, Optics express.

[18]  G Weihs,et al.  All-fiber three-path Mach-Zehnder interferometer. , 1996, Optics letters.

[19]  Bo Dong,et al.  Cladding-Mode Resonance in Polarization-Maintaining Photonic-Crystal-Fiber-Based Sagnac Interferometer and Its Application for Fiber Sensor , 2011, Journal of Lightwave Technology.

[20]  Cicero Martelli,et al.  Hydrostatic Pressure Sensing with High Birefringence Photonic Crystal Fibers , 2010, Sensors.

[21]  Deming Liu,et al.  Cascaded interferometers structure based on dual-pass Mach-Zehnder interferometer and Sagnac interferometer for dual-parameter sensing. , 2015, Optics express.

[22]  Ruohui Wang,et al.  Orientation-dependant inclinometer based on intermodal coupling of two-LP-modes in a polarization-maintaining photonic crystal fiber. , 2013, Optics express.

[23]  J. Fleming.  Dispersion in GeO2-SiO2 glasses. , 1984, Applied optics.

[24]  J M Baptista,et al.  All Fiber Mach–Zehnder Interferometer Based on Suspended Twin-Core Fiber , 2010, IEEE Photonics Technology Letters.

[25]  Jens Kobelke,et al.  Temperature- and strain-independent torsion sensor using a fiber loop mirror based on suspended twin-core fiber. , 2010, Optics letters.