Control method for centering rolls in radial-axial ring rolling process

The control method of centering rolls was developed to ensure the circularity of rings and remove the process instability during a radial-axial ring rolling (RARR) process. The position control method is determined by the growth velocity of rolling rings and mathematical correlations among the key process variables, such as ring geometries, roll shapes, and feed rates of rolls. The moving coordinate of centering rolls were calculated by the growing velocity of an outer radius of the ring, VR, and the angle between the links of the ring’s center with the mandrel’s center and with the centering roll’s center, á, in the RARR process. The growth behavior of a ring and the angle provided moving coordinates for the centering rolls in real time. The hydraulic adjustment mechanism for establishing a successful RARR process is also proposed using the parameter design of the linkage assembly and beam bending theory. In order to verify the reliability of the control method, the FE-simulation under a FORGE software environment and ring rolling experiments of 42CrMo4 rings with an outer diameter of 510mm. The results show that these methods provided a high ring circularity and process stability.

[1]  C. Xie,et al.  Rigid–viscoplastic dynamic explicit FEA of the ring rolling process , 2000 .

[2]  K. Davey,et al.  A practical method for finite element ring rolling simulation using the ALE flow formulation , 2002 .

[3]  Wang Zewu,et al.  Complete modeling and parameter optimization for virtual ring rolling , 2010 .

[4]  Gerhard Hirt,et al.  Finite element analysis of the ring rolling process with integrated closed-loop control , 2012 .

[5]  Zhichao Sun,et al.  Dynamic explicit FE modeling of hot ring rolling process , 2006 .

[6]  Rajiv Shivpuri,et al.  A summary of ring rolling technology—I. Recent trends in machines, processes and production lines , 1992 .

[7]  Rajiv Shivpuri,et al.  Planning and simulation of the ring rolling process for improved productivity , 1993 .

[8]  Lin Hua,et al.  FE analysis of coupled thermo-mechanical behaviors in radial–axial rolling of alloy steel large ring , 2010 .

[9]  Mohammad Reza Forouzan,et al.  Three-dimensional FE analysis of ring rolling by employing thermal spokes method , 2003 .

[10]  Byung-Min Kim,et al.  Advanced feasible forming condition for reducing ring spreads in radial–axial ring rolling , 2013 .

[11]  I. Pillinger,et al.  A finite-element simulation of profile ring rolling using a hybrid mesh model , 1998 .

[12]  Keith Davey,et al.  An ALE approach for finite element ring-rolling simulation of profiled rings , 2003 .

[13]  He Yang,et al.  A control method of guide rolls in 3D-FE simulation of ring rolling , 2008 .

[14]  Rajiv Shivpuri,et al.  A summary of ring rolling technology—II. Recent trends in process modeling, simulation, planning, and control , 1992 .

[15]  He Yang,et al.  Towards a steady forming condition for radial–axial ring rolling , 2011 .

[16]  Mohammad Reza Forouzan,et al.  Guide roll simulation in FE analysis of ring rolling , 2003 .

[17]  Lin Hua,et al.  Research on following motion rule of guide roller in cold rolling groove ball ring , 2007 .