Eco-design of low energy mechanical milling through implementation of quality function deployment and design for sustainability

Malaysia as a developing country favor energy demand by years which created mainly from fossil fuel. Unfortunately, the action leads to significant increment in carbon dioxide (CO2) emission that causing the global warming. The most promising mitigation strategy is by deploying Carbon Capture and Storage (CCS) technology where mineral carbonation was identified as the safest method for permanent storage and does not require continuous monitoring. Accordingly, National Green Technology was launched in 2009 to support the growth of green technology development in Malaysia as a carbon mitigation strategy. Thus, this paper aims to propose the development of a conceptual eco-design for Low Energy Mechanical Milling (LEMM). The concept was proposed by using the Quality Function Deployment (QFD) tool with combination of sustainability determinants (DFS) namely economic, environmental and social which evaluated using Solidworks 2015 sustainability assessment. The results show the new product targets for LEMM in p...

[1]  S. Vinodh,et al.  Integration of ECQFD, TRIZ, and AHP for innovative and sustainable product development , 2014 .

[2]  S. Vinodh,et al.  Integration of ECQFD and LCA for sustainable product design , 2010 .

[3]  Tick Hui Oh,et al.  Green progress and prospect in Malaysia , 2011 .

[4]  Keri Bergquist,et al.  Quality function deployment (QFD) — A means for developing usable products , 1996 .

[5]  Minoru Umemoto,et al.  Behavior of CO2 Absorption in Wet-grinding of Electronic Arc Furnace Reducing Slag by Vibration Ball Mill , 2010 .

[6]  A. Aliyu,et al.  Malaysia energy strategy towards sustainability: A panoramic overview of the benefits and challenges , 2015 .

[7]  Mohd Fahrul Hassan,et al.  Carbon Sequestration and Carbon Capture and Storage (CCS) in Southeast Asia , 2016 .

[8]  Liviu Moldovan,et al.  QFD Employment for a New Product Design in a Mineral Water Company , 2014 .

[9]  Seiji Yokoyama,et al.  Behavior of Adsorption of CO2 onto Iron Powder During Dry Grinding , 2011 .

[10]  Stefan Seuring,et al.  Determinants of a sustainable new product development , 2014 .

[11]  Minoru Umemoto,et al.  Storage of CO2 in Low Al2O3 EAF Oxidizing Slag by Grinding with Vibration Mill , 2010 .

[12]  A. Olajire.  A review of mineral carbonation technology in sequestration of CO2 , 2013 .

[13]  Razman Mat Tahar,et al.  Selection of renewable energy sources for sustainable development of electricity generation system using analytic hierarchy process: A case of Malaysia , 2014 .

[14]  Keijiro Masui,et al.  Quality function deployment for environment: QFDE (1st report)-a methodology in early stage of DfE , 2001, Proceedings Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing.

[15]  Kazem Abhary,et al.  Integrating Environmental Requirements into Quality Function Deployment for Designing Eco-Friendly Product , 2013 .

[16]  M. Mercedes Maroto-Valer,et al.  An overview of current status of carbon dioxide capture and storage technologies , 2014 .

[17]  Ming-Lu Wu,et al.  Quality function deployment: A literature review , 2002, Eur. J. Oper. Res..

[18]  Masanobu Izaki,et al.  Reaction between Carbon Dioxide and Mechanically Activated Metal Powder , 2010 .

[19]  Thong Ngee Goh,et al.  Adapting the Robust Design Methodology to support sustainable product development , 2014 .

[20]  Govind Sharan Dangayach,et al.  Key Determinants of Sustainable Product Design and Manufacturing , 2015 .

[21]  Jiunn-I Shieh,et al.  Integration of environmental considerations in quality function deployment by using fuzzy logic , 2009, Expert Syst. Appl..

[22]  Hao-Tien Liu,et al.  An improved grey quality function deployment approach using the grey TRIZ technique , 2016, Comput. Ind. Eng..

[23]  Radzuan Junin,et al.  A review on carbon dioxide mineral carbonation through pH-swing process , 2015 .

[24]  Karl R. Haapala,et al.  A unit process model based methodology to assist product sustainability assessment during design for manufacturing , 2015 .