论文信息 - A Model for the Prediction of Churning Losses in Geared Transmissions—Preliminary Results

A Model for the Prediction of Churning Losses in Geared Transmissions—Preliminary Results

A series of formulas are presented which enable accurate predictions of churning losses for one pinion characteristic of automotive transmission geometry. The results are based on dimensional analysis and have been experimentally validated over a wide range of speeds, gear geometries, lubricants, and immersion depths. The case of a pinion-gear pair in mesh has been considered, and it has been proved that, depending on the sense of rotation, the superposition of the individual losses of the pinion and of the gear leads to erroneous figures. A new formula devoted to a pinion and gear rotating anticlockwise has been derived and validated by comparison with experimental evidence.

C. Changenet | P. Velex | P. Velex | C. Changenet

[1] Fabrice Ville,et al. Experimental and Numerical Investigations on the Air-Pumping Phenomenon in High-Speed Spur and Helical Gears , 2005 .

[2] Christophe Changenet,et al. Power loss predictions in geared transmissions using thermal networks-applications to a six-speed manual gearbox , 2006 .

[3] Christophe Changenet. Modélisation du comportement thermique des transmissions par engrenages , 2006 .

[4] Christophe Changenet,et al. Windage Losses in High Speed Gears—Preliminary Experimental and Theoretical Results , 2004 .

[5] H. Blok. LES TEMPERATURES DE SURFACE DANS DES CONDITIONS DE GRAISSAGE SOUS EXTREME PRESSION , 1937 .

[6] R. E. Nece,et al. Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks , 1960 .

[7] Robert W. Mann,et al. Friction Drag on Bladed Disks in Housings as a Function of Reynolds Number, Axial and Radial Clearance, and Blade Aspect Ratio and Solidity , 1961 .