Fracture toughness testing for advanced technical ceramics: internationally agreed good practice

Abstract The development of robust methods for determining fracture toughness and for interlaboratory assessment of results is discussed with respect to procedural standardisation. Acceptable methods are based on meeting several criteria, including ease and cost-effectiveness of testpiece manufacture, the method of introducing a sharp precrack and the acceptability of appropriate fracture toughness analysis. The four simplest methods meeting these criteria are reviewed in detail, together with information on their reproducibility gathered during international round robin exercises. Not all these methods are effective on all materials, and users need to be aware of their limitations. Details of calibration equations and some experimental nuances are given.

[1]  J. I. Bluhm,et al.  Slice synthesis of a three dimensional “work of fracture” specimen , 1975 .

[2]  R. Danzer,et al.  Critical notch-root radius effect in SENB-S fracture toughness testing , 1996 .

[3]  C. Hui,et al.  Effects of finite notch width on the fracture of chevron – notched specimens , 1998 .

[4]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[5]  T. Nishida,et al.  Effect of Notch‐Root Radius on the Fracture Toughness of a Fine‐Grained Alumina , 1994 .

[6]  J. Rödel,et al.  Method for Measuring Short-Crack R-Curves without Calibration Parameters: Case Studies on Alumina and Alumina/Aluminum Composites , 1996 .

[7]  J. J. Petrovic,et al.  Controlled Surface Flaws in Hot‐Pressed SiC , 1975 .

[8]  A. Boccaccini,et al.  Applicability of the Chevron-Notch Technique for Fracture Toughness Determination in Glass , 2003 .

[9]  Jonathan A. Salem,et al.  Fracture Resistance Testing of Monolithic and Composite Brittle Materials , 2002 .

[10]  R. J. Prmas,et al.  ESIS TC 6 ROUND ROBIN ON FRACTURE TOUGHNESS , 1997 .

[11]  D. Munz,et al.  Fracture Toughness Determination of A12O3 Using Four‐Point‐Bend Specimens with Straight‐Through and Chevron Notches , 1980 .

[12]  H. Okuda,et al.  VAMAS Round Robin on Fracture Toughness of Silicon Nitride , 1995 .

[13]  J. Kübler.  Fracture Toughness of Ceramics Using the Sevnb Method: Preliminary Results , 2008 .

[14]  G. Quinn,et al.  Effect of Lateral Cracks on Fracture Toughness Determined by the Surface‐Crack‐in‐Flexure Method , 2004 .