Supercritical carbon dioxide solvent extraction from surface-micromachined micromechanical structures

Results are presented supporting the use of supercritical carbon dioxide (SCCO2) drying to enhance the yield of surface-micromachined micromechanical devices following the final release etch. The equipment and extraction process of the SCCO2 system are described, and results of successfully released cantilevered beams and microengines are presented. A new system capable of drying 6 inch wafers is also described.

[1]  H. Tilmans,et al.  Electrostatically driven vacuum-encapsulated polysilicon resonators Part I. Design and fabrication , 1994 .

[2]  M. Orpana,et al.  Control of residual stress of polysilicon thin films by heavy doping in surface micromachining , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[3]  C. Mastrangelo,et al.  A simple experimental technique for the measurement of the work of adhesion of microstructures , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[4]  E. M. Russick,et al.  Supercritical carbon dioxide extraction of gel-derived polymer foams , 1992 .

[5]  C. Hierold,et al.  A novel method to avoid sticking of surface-micromachined structures , 1996 .

[6]  M. L. Reed,et al.  Control of liquid bridging induced stiction of micromechanical structures , 1996 .

[7]  N. F. de Rooij,et al.  Capacitive polysilicon resonator with MOS detection circuit , 1991 .

[8]  R. Howe,et al.  Thermal assembly of polysilicon microstructures , 1991, [1991] Proceedings. IEEE Micro Electro Mechanical Systems.

[9]  H. Tilmans,et al.  Stiction of surface micromachined structures after rinsing and drying: model and investigation of adhesion mechanisms , 1994 .

[10]  Roger T. Howe,et al.  The effect of release-etch processing on surface microstructure stiction , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[11]  Piet Bergveld,et al.  Surface forces in micromachined structures , 1990 .

[12]  Stephen F. Bart,et al.  Operational characteristics of microfabricated electric motors , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[13]  Carlos H. Mastrangelo,et al.  Adhesion release and yield enhancement of microstructures using pulsed Lorentz forces , 1995 .

[14]  C. Mastrangelo,et al.  A dry-release method based on polymer columns for microstructure fabrication , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[15]  Jong Duk Lee,et al.  Polysilicon Surface Modification Technique To Reduce Sticking Of Microstructures , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[16]  R. J. Collins,et al.  Performance impact of monolayer coating of polysilicon micromotors , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[17]  T. Christenson,et al.  Fabrication of micromechanical devices from polysilicon films with smooth surfaces , 1989 .

[18]  Ernest J. Garcia,et al.  Surface micromachined microengine , 1995 .

[19]  H. Fujita,et al.  Electrostatic parallelogram actuators , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[20]  Roger T. Howe,et al.  Ammonium Fluoride Anti-stiction Treatments For Polysilicon Microstructures , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[21]  W. Messner,et al.  Effects of elevated temperature treatments in microstructure release procedures , 1995 .

[22]  H. Fujita,et al.  An integrated lateral tunneling unit , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[23]  Stephen F. Bart,et al.  Operational characteristics of microfabricated electric motors , 1992 .

[24]  William C. Tang,et al.  Laterally driven polysilicon resonant microstructures , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[25]  Christopher W. Dyck,et al.  Supercritical carbon dioxide extraction of solvent from micromachined structures , 1995 .

[26]  H. Tilmans,et al.  Electrostatically driven vacuum encapsulated polysilicon resonators , 1993 .