Development and Experimental Analysis of a Soft Compliant Tactile Microsensor for Anthropomorphic Artificial Hand

This paper presents the development and preliminary experimental analysis of a soft compliant tactile microsensor (SCTM) with minimum thickness of 2 mm. A high shear sensitive triaxial force microsensor was embedded in a soft, compliant, flexible packaging. The performance of the whole system, including the SCTM, an electronic hardware and a processing algorithm, was evaluated by static calibration, maximum load tests, noise and dynamic tests, and by focusing on slippage experiments. A proper tradeoff between final robustness and sensitivity of the tactile device was identified. The experiments showed that the tactile sensor is sufficiently robust for application in artificial hands while sensitive enough for slip event detection. The sensor signals were elaborated with the cumulative summation algorithm and the results showed that the SCTM system could detect a slip event with a delay from a minimum of 24.5 ms to a maximum of 44 ms in the majority of experiments fulfilling the neurophysiological requirement.

[1]  Shanglian Huang,et al.  Development of an integrated vacuum microelectronic tactile sensor array , 2003 .

[2]  S. Sokhanvar,et al.  A multifunctional PVDF-based tactile sensor for minimally invasive surgery , 2007 .

[3]  P. Dario,et al.  The Conformance Test for Robotic/Prosthetic Fingertip Skins , 2006, The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006..

[4]  Maria Chiara Carrozza,et al.  Bio-inspired approach for the design and characterization of a tactile sensory system for a cybernetic prosthetic hand , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[5]  Sungchul Kang,et al.  Development of tactile sensor for detecting contact force and slip , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  S. Micera,et al.  Design methods for innovative hand prostheses , 2004, The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[7]  Silvestro Micera,et al.  Design of a cybernetic hand for perception and action , 2006, Biological Cybernetics.

[8]  Paolo Dario,et al.  The SPRING Hand: Development of a Self-Adaptive Prosthesis for Restoring Natural Grasping , 2004, Auton. Robots.

[9]  A. Benveniste,et al.  Desgin and comparative study of some sequential jump detection algorithms for digital signals , 1983 .

[10]  Tao Mei,et al.  The design and fabrication of a flexible three-dimensional force sensor skin , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  Paolo Dario,et al.  Design and development of an underactuated prosthetic hand , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[12]  M. Shimojo,et al.  A system for simultaneously measuring grasping posture and pressure distribution , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[13]  P. Dario,et al.  Design and fabrication of a hybrid silicon three-axial force sensor for biomechanical applications , 2005 .

[14]  R. Johansson,et al.  Signals in tactile afferents from the fingers eliciting adaptive motor responses during precision grip , 2004, Experimental Brain Research.

[15]  Jan Wikander,et al.  Tactile sensing in intelligent robotic manipulation - a review , 2005, Ind. Robot.

[16]  E. Hwang,et al.  A Polymer-Based Flexible Tactile Sensor for Both Normal and Shear Load Detections and Its Application for Robotics , 2007, Journal of Microelectromechanical Systems.

[17]  Kunnyun Kim,et al.  Flexible Tactile Sensor Fabricated using Polymer Membrane , 2006, 2006 5th IEEE Conference on Sensors.

[18]  B. J. Kane,et al.  A traction stress sensor array for use in high-resolution robotic tactile imaging , 2000, Journal of Microelectromechanical Systems.

[19]  S. Middelhoek,et al.  Silicon Three-axial Tactile Sensor , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[20]  G. Zimmer,et al.  New tactile sensor chip with silicone rubber cover , 2000 .

[21]  Mitsuhiro Shikida,et al.  Active tactile sensor for detecting contact force and hardness of an object , 2003 .

[22]  Yoji Umetani,et al.  Identification of Incipient Slip Phenomena Based on The Circuit Output Signals of PVDF Film Strips E , 2004 .

[23]  Wen J. Li,et al.  An integrated MEMS three-dimensional tactile sensor with large force range , 2000 .

[24]  R. Johansson,et al.  Responses in glabrous skin mechanoreceptors during precision grip in humans , 2004, Experimental Brain Research.

[25]  P. Dario,et al.  Characterization of a novel hybrid silicon three-axial force sensor , 2005 .

[26]  S. Roccella,et al.  Bio-inspired sensorization of a biomechatronic robot hand for the grasp-and-lift task , 2008, Brain Research Bulletin.

[27]  Mark Lee,et al.  Review Article Tactile sensing for mechatronics—a state of the art survey , 1999 .

[28]  Yon-Kyu Park,et al.  Design of Flexible Tactile Sensor Based on Three-Component Force and Its Fabrication , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[29]  Paolo Dario,et al.  Slippage control in hand prostheses by sensing grasping forces and sliding motion , 1994, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'94).

[30]  Minoru Asada,et al.  Anthropomorphic robotic soft fingertip with randomly distributed receptors , 2006, Robotics Auton. Syst..

[31]  R. Johansson,et al.  Predictive feed-forward sensory control during grasping and manipulation in man , 1993 .

[32]  J. Engel,et al.  Polymer micromachined multimodal tactile sensors , 2005 .

[33]  Takashi Maeno,et al.  Artificial finger skin having ridges and distributed tactile sensors used for grasp force control , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[34]  Paolo Dario,et al.  An integrated miniature fingertip sensor , 1996, MHS'96 Proceedings of the Seventh International Symposium on Micro Machine and Human Science.

[35]  D. Beebe,et al.  A silicon-based shear force sensor: development and characterization , 2000 .

[36]  M. Alexander,et al.  Principles of Neural Science , 1981 .

[37]  P. Chappell,et al.  Thick-film force and slip sensors for a prosthetic hand , 2005 .