On the use of systems technologies and a systematic approach for the synthesis and the design of future biorefineries

Systems technologies emerge with a powerful potential to support the deployment and design of future biorefineries. The chemical industry experiences a steady growth in the use of renewables induced by the gradual depletion of oil, uncertainties in energy supplies and a commanding requirement to reduce GHG emissions and save the planet. Renewables introduce an impressive range of options with biorefining at the center of attention as an emerging industrial concept, uniquely attached to chemical engineering and aiming to transform plant-derived biomass into a variety of products including transport fuels, platform chemicals, polymers, and specialty chemicals. In competing with conventional processes, biorefineries should match maximum efficiencies with better design and process integration. The paper highlights the pivotal role of systems technology to foster innovation, preview options, and support high-throughput computational experimentation, arguing that systems tools are largely under-deployed. Systems-enabled platforms could instead function as powerful environments to generate ideas for integrated designs and offer tremendous services to the complex and large problems produced by the numerous portfolios of feedstocks, unknown portfolios of products, multiple chemistries, and multiple processing paths. Complexities certainly exceed capabilities of previous methodologies but established achievements and experience with similar problems are excellent starting points for future contributions. Besides a general discussion, the paper outlines opportunities for innovation in design, concept-level synthesis, process integration, and the development of supply chains.

[1]  Antonis C. Kokossis,et al.  Scoping and screening complex reaction networks using stochastic optimization , 1999 .

[2]  Antonis C. Kokossis,et al.  Hypertargets: a Conceptual Programming approach for the optimisation of industrial heat exchanger networks—I. Grassroots design and network complexity , 1999 .

[3]  New generation tools for multiphase reaction systems: A validated systematic methodology for novelty and design automation , 1998 .

[4]  Ignacio E. Grossmann,et al.  Challenges in the new millennium: product discovery and design, enterprise and supply chain optimization, global life cycle assessment , 2004, Comput. Chem. Eng..

[5]  Seungdo Kim,et al.  Comparison of crop and animal simulation options for integration with the biorefinery , 2008 .

[6]  Piyush B. Shah,et al.  New synthesis framework for the optimization of complex distillation systems , 2002 .

[7]  Amit Kumar,et al.  Development and implementation of integrated biomass supply analysis and logistics model (IBSAL) , 2006 .

[8]  End Use.  Annual energy review , 1984 .

[9]  Judith Gurney.  BP Statistical Review of World Energy , 1985 .

[10]  Anton Friedl,et al.  Analysis and decrease of the energy demand of bioethanol-production by process integration , 2007 .

[11]  Alexandre C. Dimian.  Renewable raw materials: chance and challenge for computer-aided process engineering , 2007 .

[12]  A. Corma,et al.  Chemical routes for the transformation of biomass into chemicals. , 2007, Chemical reviews.

[13]  Piyush B. Shah,et al.  Knowledge based models for the analysis of complex separation processes , 2000 .

[14]  Patrick Linke,et al.  Advanced process systems design technology for pollution prevention and waste treatment , 2004 .

[15]  Christodoulos A. Floudas,et al.  Synthesis of isothermal reactor—separator—recycle systems , 1991 .

[16]  Carlos A Cardona,et al.  Fuel ethanol production: process design trends and integration opportunities. , 2007, Bioresource technology.

[17]  Robin Smith,et al.  Design of distributed effluent treatment systems , 1994 .

[18]  L. Lynd,et al.  Toward an aggregated understanding of enzymatic hydrolysis of cellulose: Noncomplexed cellulase systems , 2004, Biotechnology and bioengineering.

[19]  François Maréchal,et al.  Methodology for the optimal thermo-economic, multi-objective design of thermochemical fuel production from biomass , 2009, Comput. Chem. Eng..

[20]  Cutler J. Cleveland,et al.  Encyclopedia of Energy , 2004 .

[21]  G Charles Dismukes,et al.  Aquatic phototrophs: efficient alternatives to land-based crops for biofuels. , 2008, Current opinion in biotechnology.

[22]  Johan P.M. Sanders,et al.  Bulk chemicals from biomass , 2008 .

[23]  Antonis C. Kokossis,et al.  On the development of novel chemicals using a systematic optimisation approach. Part II. Solvent design , 2000 .

[24]  Mahmoud M. El-Halwagi,et al.  Targeting cogeneration and waste utilization through process integration , 2009 .

[25]  Patrick Linke,et al.  A Multi-Level Methodology for Conceptual Reaction-Separation Process Design , 2007 .

[26]  Subhas K. Sikdar,et al.  Process Design Tools for the Environment , 2001 .

[27]  V. Manousiouthakis,et al.  Automatic synthesis of mass-exchange networks with single-component targets , 1990 .

[28]  Jhuma Sadhukhan,et al.  Value analysis tool for feasibility studies of biorefineries integrated with value added production , 2008 .

[29]  Ian T. Cameron,et al.  Classification and analysis of integrating frameworks in multiscale modelling , 2004 .

[30]  Patrick Linke,et al.  Multiobjective molecular design for integrated process‐solvent systems synthesis , 2006 .

[31]  N. A. Kumar,et al.  A perspective on the biotechnological potential of microalgae. , 2008, Critical reviews in microbiology.

[32]  Patrick Linke,et al.  Efficient integration of optimal solvent and process design using molecular clustering , 2006 .

[33]  Carlos A Cardona,et al.  Process integration possibilities for biodiesel production from palm oil using ethanol obtained from lignocellulosic residues of oil palm industry. , 2009, Bioresource technology.

[34]  Patrick Linke,et al.  Attainable reaction and separation processes from a superstructure‐based method , 2003 .

[35]  Wei Yuan,et al.  A Flexible Framework for Optimal Biorefinery Product Allocation , 2007 .

[36]  Robin Smith,et al.  A conceptual decomposition of MINLP models for the design of water-using systems , 2007 .

[37]  Biofuels in the European Union A VISION FOR 2030 AND BEYOND , 2006 .

[38]  M. Borowitzka.  Commercial production of microalgae: ponds, tanks, tubes and fermenters , 1999 .

[39]  N. Hallale,et al.  Capital cost targets for mass exchange networks A special case: Water minimisation , 1998 .

[40]  A. McAloon,et al.  A process model to estimate biodiesel production costs. , 2006, Bioresource technology.

[41]  M. El‐Halwagi.  Pollution prevention through process integration : systematic design tools , 1997 .

[42]  William Johns,et al.  Computer‐Aided Chemical Engineering , 2011 .

[43]  James H. Clark,et al.  Green chemistry for the second generation biorefinery—sustainable chemical manufacturing based on biomass , 2007 .

[44]  J. C. Merchuk,et al.  Photobioreactor Design and Fluid Dynamics , 2007 .

[45]  T. Ranta.  Logging residues from regeneration fellings for biofuel production - a GIS-based availability analysis in Finland. , 2005 .

[46]  Eric S. Fraga,et al.  Process Synthesis for Fuel Ethanol Production from Lignocellulosic Biomass Using an Optimization-Based Strategy , 2006 .

[47]  Robin Smith,et al.  Automated design of total water systems , 2005 .

[48]  L. Naess,et al.  The synthesis of cost optimal heat exchanger networks. An industrial review of the state of the art , 1988 .

[49]  Robin Smith,et al.  Chemical Process: Design and Integration , 2005 .

[50]  Antonis C. Kokossis,et al.  The design of water-using systems in petroleum refining using a water-pinch decomposition , 2007 .

[51]  Marker,et al.  Opportunities for Biorenewables in Oil Refineries , 2005 .

[52]  B. G. Hermann,et al.  Today’s and tomorrow’s bio-based bulk chemicals from white biotechnology , 2007, Applied biochemistry and biotechnology.

[53]  Antonis C. Kokossis,et al.  On the development of novel chemicals using a systematic synthesis approach. Part I. Optimisation framework , 2000 .

[54]  Johnathan E. Holladay,et al.  Top Value Added Chemicals From Biomass. Volume 1 - Results of Screening for Potential Candidates From Sugars and Synthesis Gas , 2004 .

[55]  A. Corma,et al.  Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering. , 2006, Chemical reviews.

[56]  François Maréchal,et al.  Process design of Synthetic Natural Gas (SNG) production using wood gasification , 2005 .

[57]  Mahmoud M. El-Halwagi,et al.  Synthesis of reactive mass-exchange networks , 1992 .

[58]  Fabrizio Bezzo,et al.  A techno-economic comparison between two technologies for bioethanol production from lignocellulose. , 2009 .

[59]  M. H. Nguyen,et al.  A simple rule for bioenergy conversion plant size optimisation: bioethanol from sugar cane and sweet sorghum. , 1996 .

[60]  Antonis C. Kokossis,et al.  Development of novel multiphase reactors using a systematic design framework , 1997 .

[61]  Johann C. Wurzenberger,et al.  Thermal conversion of biomass: Comprehensive reactor and particle modeling , 2002 .

[62]  Antonis C. Kokossis,et al.  A multi-contaminant transhipment model for mass exchange networks and wastewater minimisation problems , 1999 .

[63]  Antonis C. Kokossis,et al.  Hypertargets: a Conceptual Programming approach for the optimisation of industrial heat exchanger networks — II. Retrofit design , 1999 .

[64]  Christodoulos A. Floudas,et al.  Optimization of complex reactor networks—I. Isothermal operation , 1990 .

[65]  A. Bridgwater,et al.  An overview of fast pyrolysis of biomass , 1999 .

[66]  Patrick Linke,et al.  On the robust application of stochastic optimisation technology for the synthesis of reaction/separation systems , 2003, Comput. Chem. Eng..

[67]  Mark Ruth,et al.  Process Design and Costing of Bioethanol Technology: A Tool for Determining the Status and Direction of Research and Development , 1999, Biotechnology progress.

[68]  Ayhan Demirbas,et al.  Progress and recent trends in biofuels , 2007 .

[69]  Mahmoud M. El-Halwagi,et al.  Targeting material reuse via property integration , 2005 .

[70]  David K. Johnson,et al.  Top Value-Added Chemicals from Biomass - Volume II—Results of Screening for Potential Candidates from Biorefinery Lignin , 2007 .

[71]  Karsten-Ulrich Klatt,et al.  Perspectives for process systems engineering - Personal views from academia and industry , 2009, Comput. Chem. Eng..

[72]  Cardona Alzate,et al.  Energy consumption analysis of integrated flowsheets for production of fuel ethanol from lignocellulosic biomass , 2006 .

[73]  E. Audsley,et al.  Modelling the value of a rural biorefinery--part I: the model description , 2003 .

[74]  Mahmoud M. El-Halwagi,et al.  Simultaneous Process and Molecular Design through Property Clustering Techniques: A Visualization Tool , 2007 .

[75]  Xia Li,et al.  Using spatial information technologies to select sites for biomass power plants : A case study in Guangdong Province, China , 2008 .

[76]  Lachlan Aldred,et al.  Process Integration , 2010, Modern Business Process Automation.

[77]  Youn-Sang Choi,et al.  Economic feasibility of producing ethanol from lignocellulosic feedstocks , 2000 .

[78]  S. Adhikari,et al.  Biorefineries: Current Status, Challenges, and Future Direction , 2006 .

[79]  R. J. Batterham,et al.  Ten years of sustainability: where do we go from here , 2003 .

[80]  Colomba Di Blasi,et al.  Modeling chemical and physical processes of wood and biomass pyrolysis , 2008 .

[81]  M. Ladisch,et al.  Assessment of ethanol production options for corn products , 1996 .

[82]  C. Ugwu,et al.  Photobioreactors for mass cultivation of algae. , 2008, Bioresource technology.

[83]  Mahmoud M. El-Halwagi,et al.  Simultaneous synthesis of mass‐exchange and regeneration networks , 1990 .